TASCAM PS-P520 Adaptor Spare Part

For models

CD-GΤ2

CD-ΒΤ2

CD-VΤ2

DR-1

DR-07

DR-100

The MS 1033 is really a dual sound source, built on two independent sections that can be used at the simultaneously.

Each section has a stereo sound output and its own level control. A selector, which is common to both sources, can mix the stereo channels transforming the CD and TUNER output to MONO for applications that do not require a stereo signal.  The MS 1033 can be fitted in a rack (1U 19“).

The Citronic MPCD-4 Ultima is a dual full function MP3/CD Player with features like folder access, accurate seamless loop where the IN and Out points can be edited, hot cues, Tempo lock, scratch function, crystal clear display and slot loading mechanisms. All this and more work with MP3 as accurately as with CD, to create the ultimate player. The MPCD-4 uses an Fl tube display allowing crystal clear text display using dot matrix text characters of the folder/tracks title, time, BPM, plus and indication of other features activated. The MPCD-4 has full and accurate pitch control over MP3 files including "Pitch Lock”. The hot CUE buttons allow on the fly cue points or loops to be saved into the buffer memory for quick access, these can be then saved, next time the disc is inserted the cue/loop points that have been saved will be automatically recalled.

MP3 playback with file and folder text
Intelligent memory system stores 500 cue/loop points
Reads Audio and MP3 CDs, CD-R, & CD-RW Discs
Pitch lock (Master Tempo) for both CD & MP3

• CD / USB / SD / MP3 player
• IR remote control
• Title direct access
• Program function
• Various repeat modes
• Balanced XLR output
• Anti shock buffer memory 40 sec.
• 19 inch housing

RECORDING / PLAYBACK
GENERAL
Recording Media CD-R, CD-RW
Sampling Frequency / Quantization 44.1kHz / 48kHz, 16bit
44.1kHz / 48kHz / 88.2kHz / 96kHz, 24bit
File System CD-DA (CD rec/repro)
ISO9660 (CD-ROM, repro. only)
UDF ver.1.02 (CD-ROM, rec/repro)
File Format CD-DA, BWF-P
S/N 100 dB (typical)
Dynamic Rage 100 dB (typical)
Reference Level -12dBFS / -20dBFS
T.H.D. less than 0.01 % (typical)
INPUTS/OUTPUTS
Analog Input (L/R, balanced)
Connector XLR-3-31 type x2
Input Impedance 10k ohm or more
Standard Input Level +4dBu
Maximum Input Level +24dBu
Analog Input (L/R, unbalanced)
Connector RCA pin jack x2
Input Impedance 10k ohm or more
Standard Input Level -10dBV
Maximum Input Level +10dBV
Analog Output (L/R, balanced)
Connector XLR-3-32 type x2
Loaded Impedance 10k ohm or more
Standard Output Level +4dBu
Maximum Output Level +24dBu
Analog Output (L/R, unbalanced)
Connector RCA pin jack x2
Output Impedance 10k ohm or more
Standard Output Level -10dBV
Maximum Output Level +10dBV
Phones
Connectors Ø6mm Stereo Phone Jack x1
Loaded Impedance 8ohm or higher
Maximum Output Level 100mW (32ohm)
Digital Input (balanced)
Connector XLR-3-31 type x1
Input Format IEC60958 Part2 (S/P DIF)/IEC60958 Part3 (AES/EBU)
Automatic detect
Digital Output (balanced)
Connector XLR-3-32 type x1
Output Format IEC60958 Part2 (S/P DIF)/IEC60958 Part3 (AES/EBU)
Switchable
USB (for USB Keyboard only)
Connector USB series A receptacle x1
GPI (for fader start)
Connector Ø6mm Phone Jack x1
Format Short : Start / Open : Stop
PHYSICAL
Power requirements AC 100V – 240V, 50/60 Hz
Power consumption 14 W
Weight (without package) 4.8 kg
Max. dimensions 482 (W) x 93.5 (H) x 321 (D) mm