TASCAM DP-32 SD 32-Track Digital Portastudio

625.00 incl. GR VAT

Available on backorder

EAN: N/A
Installments calculation
CompareAdd to wishlist Submit Better Price
Add 8 more ADAT optical inputs and outputs to your DM-3200 or DM-4800. Also works with older TASCAM gear such as the DM-24, DS-M71 and SX-1.The DP-32 is a home recording Portastudio with 32 tracks based on solid-state technology. The unit is equipped with colour LCD and channel strip controls to make recording simple so […]

 

Read more

Add 8 more ADAT optical inputs and outputs to your DM-3200 or DM-4800. Also works with older TASCAM gear such as the DM-24, DS-M71 and SX-1.The DP-32 is a home recording Portastudio with 32 tracks based on solid-state technology. The unit is equipped with colour LCD and channel strip controls to make recording simple so the user can stay creative. Up to eight tracks can be recorded at a time on a standard SD/SDHC memory card through its XLR and 6.3-mm combo jacks. Input processing like compression and limiting, an internal send effect with reverb, delay and chorus, guitar amp simulation and multi-effects for use with the instrument-level input as well as an external effects send are available during recording.

For mixdown, the DP-32 offers 20 channel faders and 12 rotary controls for EQ, Pan and effects including reverb and chorus. During the mastering process, the material can be further optimized with EQ, compression and normalization. Once finished, songs can be written to CD with the built-in CD-RW drive or transferred to computer over USB to publish the songs on the Internet, for example.

Main Features

32-track digital Portastudio
8 mono tracks, 12 stereo tracks (can also be used as mono tracks)
Record up to 8 tracks at once with 44.1/48 kHz and 16/24-bit audio resolution
Simultaneous playback of all 32 tracks
Virtual tracks for alternate takes and undo
Dedicated stereo master track
Colour LC display and 12-encoder channel strip for simple operation
Built-in 40-channel mixer
Mix down your 32 playback tracks with eight input signals to the dedicated stereo master track
Use the Bounce function to set tracks free by mixing multiple tracks to a single mono or stereo track
Dedicated controls for EQ, pan and effect sends
Solid-state recording to SD Card media for better shock resistance and reliability compared to hard drive recording
8 balanced microphone inputs on balanced combo XLR/jack connectors
Switchable phantom power for 4 channels each
One input switchable to instrument level for direct recording of a guitar or bass
Unbalanced stereo output (RCA jacks)
Balanced stereo monitor output (6.3-mm TRS jacks)
Two unbalanced effect sends (6.3-mm TS jacks)
Stereo headphones output (6.3-mm TRS jack)
MIDI input and output for MMC, Control Change and MTC output
Footswitch input (2.5-mm mini jack) for Tascam RC-3F (optional accessory)
Input effects (Limiter, Compressor, Noise suppressor, Exciter)
Guitar effects (Amp simulator, Reverb, Compressor, Chorus, Flanger, Phase shifter)
Mixdown effects (Reverb, Delay, Stereo chorus)
Mastering effect (Single/Multi-band stereo compressor, EQ, Noise shaping)
Mark function (up to 99 location marks)
Built-in chromatic tuner and metronome
CD-RW drive for audio CD creation as well as file import and export
USB 2.0 port for data backup/restore and file transfer with a computer
Specifications

Recording media and file systems
Recording media        SD card (512 MB to 2 GB)
SDHC card (4–32 GB)
File system        SD card (512 MB to 2 GB): FAT16
SDHC card (4–32 GB): FAT32
Analogue audio inputs and outputs
MIC/LINE INPUTS A–H, XLR (balanced)
Connector        XLR-3-31 (1: GND, 2: HOT, 3: COLD)
Input impedance        2.4 kOhm
Nominal input level        –14 dBu
Maximum input level        +2 dBu
MIC/LINE INPUTS A–H, phone jack (balanced)
Connector        6.3-mm TRS phone jack
Input impedance        >22 kOhm or 1 MOhm (INPUT H, when LINE-GUITAR switch is set to GUITAR)
Nominal input level        +4 dBu
Maximum input level        +20 dBu
STEREO OUT L/R connectors        RCA pin jack
Nominal output level        –10 dBV
Maximum output level        +6 dBV
Output impedance        200 Ohm
EFFECT SENDS 1/2 connectors        6.3-mm TS phone jack
Nominal output level        –10 dBV
Maximum output level        +6 dBV
Output impedance        200 Ohm
MONITOR OUT L/R connectors        6.3-mm TRS phone jack
Nominal output level        –2 dBu
Maximum output level        +14 dBu
Output impedance        200 Ohm
PHONES connector        6.3-mm TRS phone jack
Maximum output power        70 mW + 70 mW or more (THD + N 0.1% or less, 32 Ohm load)
Other inputs and outputs
MIDI input (MIDI IN)        DIN 5 pin
Format        Standard MIDI format
MIDI output (MIDI OUT)        DIN 5 pin
Format        Standard MIDI format
USB connector        USB 4-pin mini-B type
Format        Mass Storage Class USB 2.0 High Speed
REMOTE connector        2.5-mm TRS jack
Audio performance
Frequency response        20 Hz to 20 kHz, +1/–1 dB (MIC/LINE INPUT to STEREO OUT/EFFECT SENDS/MONITOR OUT)
Distortion        ≤0.01 % (MIC/LINE INPUT to STEREO OUT/EFFECT SENDS/MONITOR OUT)
S/N ratio        ≥90 dB (MIC/LINE INPUT to STEREO OUT/EFFECT SENDS/MONITOR OUT)
Audio performance
Frequency response        20 Hz to 20 kHz, +1/–1 dB (MIC/LINE INPUT to STEREO OUT/EFFECT SENDS/MONITOR OUT)
Distortion        ≤0.01 % (MIC/LINE INPUT to STEREO OUT/EFFECT SENDS/MONITOR OUT)
S/N ratio        ≥90 dB (MIC/LINE INPUT to STEREO OUT/EFFECT SENDS/MONITOR OUT)
Operating system requirements
Windows        Pentium 300 MHz or faster
128 MB or more memory
Macintosh        Power PC, iMac, G3, G4 266 MHz or faster
64 MB or more memory
Recommended USB port        USB 2.0
Recommended USB host controller        Intel chipset
Supported operating systems        Windows XP, Windows Vista, Windows 7
Mac OS X 10.2 or later
Power requirements and other specifications
Power supply        AC adaptor (TASCAM PS-1225L)
Power consumption        12 W (Phantom power on)
Dimensions (Width x Height x Depth, excluding projections)        514 mm x 104 mm x 340 mm
Weight        6.2 kg
Operating temperature        5–35 °C
Design and specifications subject to change without notice.

Weight 6.20 kg

Reviews

There are no reviews yet.

Be the first to review “TASCAM DP-32 SD 32-Track Digital Portastudio”

Your email address will not be published. Required fields are marked *

Quick Comparison

TASCAM DP-32 SD 32-Track Digital Portastudio removeKurzweil KORE64 Expansion Card for PC3/PC3K removeAPOGEE X-HD EXPANSION CARD FOR CONNECTING Apogee Converters WITH DigiDesign HD removeTASCAM DP-24 SD Digital recording system removeKorg D-4 Digital Recording Studio removeTASCAM HD-R1 Professional CF-Card Recorder: Rackmounted remove
NameTASCAM DP-32 SD 32-Track Digital Portastudio removeKurzweil KORE64 Expansion Card for PC3/PC3K removeAPOGEE X-HD EXPANSION CARD FOR CONNECTING Apogee Converters WITH DigiDesign HD removeTASCAM DP-24 SD Digital recording system removeKorg D-4 Digital Recording Studio removeTASCAM HD-R1 Professional CF-Card Recorder: Rackmounted remove
Image
SKUTAEM000555KORE64X-HDTAEM000544D4 KORGHD-R1
Rating
Price 625.00 incl. GR VAT 156.00 incl. GR VAT 523.77 incl. GR VAT 469.00 incl. GR VAT 272.00 incl. GR VAT 1,225.89 incl. GR VAT
Stock

Available on backorder

Available on backorder

In stock

Available on backorder

Available on backorder

Only 4 left in stock

AvailabilityAvailable on backorderAvailable on backorderIn stockAvailable on backorderAvailable on backorderOnly 4 left in stock
Add to cart

Add to cart

Add to cart

Add to cart

Add to cart

Add to cart

Add to cart

Description
ContentAdd 8 more ADAT optical inputs and outputs to your DM-3200 or DM-4800. Also works with older TASCAM gear such as the DM-24, DS-M71 and SX-1.The DP-32 is a home recording Portastudio with 32 tracks based on solid-state technology. The unit is equipped with colour LCD and channel strip controls to make recording simple so the user can stay creative. Up to eight tracks can be recorded at a time on a standard SD/SDHC memory card through its XLR and 6.3-mm combo jacks. Input processing like compression and limiting, an internal send effect with reverb, delay and chorus, guitar amp simulation and multi-effects for use with the instrument-level input as well as an external effects send are available during recording. For mixdown, the DP-32 offers 20 channel faders and 12 rotary controls for EQ, Pan and effects including reverb and chorus. During the mastering process, the material can be further optimized with EQ, compression and normalization. Once finished, songs can be written to CD with the built-in CD-RW drive or transferred to computer over USB to publish the songs on the Internet, for example. Main Features 32-track digital Portastudio 8 mono tracks, 12 stereo tracks (can also be used as mono tracks) Record up to 8 tracks at once with 44.1/48 kHz and 16/24-bit audio resolution Simultaneous playback of all 32 tracks Virtual tracks for alternate takes and undo Dedicated stereo master track Colour LC display and 12-encoder channel strip for simple operation Built-in 40-channel mixer Mix down your 32 playback tracks with eight input signals to the dedicated stereo master track Use the Bounce function to set tracks free by mixing multiple tracks to a single mono or stereo track Dedicated controls for EQ, pan and effect sends Solid-state recording to SD Card media for better shock resistance and reliability compared to hard drive recording 8 balanced microphone inputs on balanced combo XLR/jack connectors Switchable phantom power for 4 channels each One input switchable to instrument level for direct recording of a guitar or bass Unbalanced stereo output (RCA jacks) Balanced stereo monitor output (6.3-mm TRS jacks) Two unbalanced effect sends (6.3-mm TS jacks) Stereo headphones output (6.3-mm TRS jack) MIDI input and output for MMC, Control Change and MTC output Footswitch input (2.5-mm mini jack) for Tascam RC-3F (optional accessory) Input effects (Limiter, Compressor, Noise suppressor, Exciter) Guitar effects (Amp simulator, Reverb, Compressor, Chorus, Flanger, Phase shifter) Mixdown effects (Reverb, Delay, Stereo chorus) Mastering effect (Single/Multi-band stereo compressor, EQ, Noise shaping) Mark function (up to 99 location marks) Built-in chromatic tuner and metronome CD-RW drive for audio CD creation as well as file import and export USB 2.0 port for data backup/restore and file transfer with a computer Specifications Recording media and file systems Recording media        SD card (512 MB to 2 GB) SDHC card (4–32 GB) File system        SD card (512 MB to 2 GB): FAT16 SDHC card (4–32 GB): FAT32 Analogue audio inputs and outputs MIC/LINE INPUTS A–H, XLR (balanced) Connector        XLR-3-31 (1: GND, 2: HOT, 3: COLD) Input impedance        2.4 kOhm Nominal input level        –14 dBu Maximum input level        +2 dBu MIC/LINE INPUTS A–H, phone jack (balanced) Connector        6.3-mm TRS phone jack Input impedance        >22 kOhm or 1 MOhm (INPUT H, when LINE-GUITAR switch is set to GUITAR) Nominal input level        +4 dBu Maximum input level        +20 dBu STEREO OUT L/R connectors        RCA pin jack Nominal output level        –10 dBV Maximum output level        +6 dBV Output impedance        200 Ohm EFFECT SENDS 1/2 connectors        6.3-mm TS phone jack Nominal output level        –10 dBV Maximum output level        +6 dBV Output impedance        200 Ohm MONITOR OUT L/R connectors        6.3-mm TRS phone jack Nominal output level        –2 dBu Maximum output level        +14 dBu Output impedance        200 Ohm PHONES connector        6.3-mm TRS phone jack Maximum output power        70 mW + 70 mW or more (THD + N 0.1% or less, 32 Ohm load) Other inputs and outputs MIDI input (MIDI IN)        DIN 5 pin Format        Standard MIDI format MIDI output (MIDI OUT)        DIN 5 pin Format        Standard MIDI format USB connector        USB 4-pin mini-B type Format        Mass Storage Class USB 2.0 High Speed REMOTE connector        2.5-mm TRS jack Audio performance Frequency response        20 Hz to 20 kHz, +1/–1 dB (MIC/LINE INPUT to STEREO OUT/EFFECT SENDS/MONITOR OUT) Distortion        ≤0.01 % (MIC/LINE INPUT to STEREO OUT/EFFECT SENDS/MONITOR OUT) S/N ratio        ≥90 dB (MIC/LINE INPUT to STEREO OUT/EFFECT SENDS/MONITOR OUT) Audio performance Frequency response        20 Hz to 20 kHz, +1/–1 dB (MIC/LINE INPUT to STEREO OUT/EFFECT SENDS/MONITOR OUT) Distortion        ≤0.01 % (MIC/LINE INPUT to STEREO OUT/EFFECT SENDS/MONITOR OUT) S/N ratio        ≥90 dB (MIC/LINE INPUT to STEREO OUT/EFFECT SENDS/MONITOR OUT) Operating system requirements Windows        Pentium 300 MHz or faster 128 MB or more memory Macintosh        Power PC, iMac, G3, G4 266 MHz or faster 64 MB or more memory Recommended USB port        USB 2.0 Recommended USB host controller        Intel chipset Supported operating systems        Windows XP, Windows Vista, Windows 7 Mac OS X 10.2 or later Power requirements and other specifications Power supply        AC adaptor (TASCAM PS-1225L) Power consumption        12 W (Phantom power on) Dimensions (Width x Height x Depth, excluding projections)        514 mm x 104 mm x 340 mm Weight        6.2 kg Operating temperature        5–35 °C Design and specifications subject to change without notice.


The KORE 64™ ROM option represents a complete expansion and reimagining of the PC3 and PC3K's sonic potential (not for the PC3LE). Pushing the limits of V.A.S.T. synthesis for both realistic and experimental electronic sounds, KORE 64™ adds over 300 new programs, including stunning new Synths, Electric Guitars, Horns, Drums and Percussion. With KORE 64™ installed, the PC3/K built-in program library now totals over 1400 presets!


    New Setups:

        50 new setups featuring the KORE 64™ sounds.
        Over 200 new drum grooves in multiple styles.
        New Dance and Hip Hop setups for triggering and controlling beats in real time.

    New Synths:

        New samples modeled after the Oberheim SEM, ARP Chroma, TX802, CZ1, and dozens of legacy waveforms from the K series.
        Over 100 new synth programs.
        Sounds for popular electronic music styles like House, Trance, Dubstep, Drum&Bass, Glitch, Electro Hip Hop, and more.
        More real time controls, beat-synced modulations and envelope control transform sounds without hitting the edit button.
        Atmospheric and cycling pads voiced for performing, producing, and scoring.

    New Guitars:

        New samples modeled after the Gibson Les Paul and Fender Stratocaster.
        Palm muted and sustained articulations playable in a picked or legato style.
        Instant-shredder arpeggiator patterns, whammy bar effects, and realistic feedback emulations.
        Preset sounds from Rock, Country, Rock-a-Billy, Metal, Funk, and more.

    New Brass/Woodwinds:

        New alto sax, tenor sax, baritone sax, trumpet, and trombone samples.
        New programs include solo instruments and custom sections with many combinations of the different instruments.
        Articulate with pressure on several new programs.
        Sections cover styles from Big Band, Soul, Funk, Latin, R&B, Hip Hop, Rock and more.

    New Drums

        Drums from Yamaha, Ludwig, Pearl, DW, Rogers, and Gretsch recorded as full kits.
        Full cymbal arrays recorded with Zildjian, Paiste, and Sabian cymbals.
        72 new Drum Kits and 62 percussion instruments and templates.
        10 times the samples and 30 times the data of the existing PC3/PC3K Drums.
        All drum kits have mixer functioning on the sliders to change the level the kick, snare, toms, hats, and percussion independently.
        Unsurpassed realism and playability for sampled drums.
        Full complement of Electronic and Processed Drum samples.
        Scratches, hits and Industrial Sounds.
        Wide variety of traditional and processed Percussion sounds.

Download the full preset Objects List under the Downloads section

User Installable.

Requires:  PC3K OS v2.20 or better
                  PC3 OS v2.20 or better

All specifications subject to change without notice.


Apogee makes the direct connection to Pro Tools | HD systems a reality. The Apogee X-HD option card allows for direct connectivity between Pro Tools HD™ systems and Apogee's X-Series or Rosetta 200 converters. The result is an incredibly powerful combination of Digidesign's™Ê¼ Pro Tools software and Apogee's superior conversion and clocking hardware.

Features:
  • Primary HD port for connecting directly to HD Core or Accel cards.
  • Expansion port for daisy-chaining multiple Apogee devices (AD-16X, DA-16X, Rosetta 800 & Rosetta 200)
  • Compatible with the latest versions of ProTools
  • May be used along side similar interfaces (such as Digidesign 96 I/O, 192 I/O, Prism Dream ADA-8)
  • Please note: Not compatible with Pro Tools|HD Native

The DP-24SD Digital Portastudio is a 24-track workstation, allowing eight tracks of simltaneous recording. The built-in mixer includes everything you need for a professional-sounding mix, from EQ and reverb to amp simulation and multi-band mastering effects. The Digital Portastudio series creates finished productions without the need for a computer, instead using a simple-to-use control surface to keep you creative. 

For clear display of your mix, the DP-24SD has a large color LCD displaying tracks, meters, and effects parameters. A set of 12 encoders control EQ, effects sends, and panning. Built-in effects include compression, guitar amp modeling, delay, reverb, with a total of 10 effects processirs available during mixing. 

Eight XLR mic/line inputs each provide phantom power for condenser microphones, switchable in banks of four. One input includes an instrument-level impedence switch for direct input recording of guitar or bass. Balanced monitor outputs and effects sends are also provided on the rear panel. A USB output allows tracks and mixes recorded to your SD card to be transferred to a computer for CD burning or sharing online. 

For a complete music production on a desktop, there's no simpler choice than the DP-24SD.

DP-24SD SPECIFICATIONS
Recording Media SD (512MB – 2GB) / SDHC card (4GB – 32GB)
File System SD card:FAT16 / SDHC card:FAT32
INPUT A-H
 
XLR
 
Connector XLR-3-31(1:GND, 2:HOT, 3:COLD), Balanced
Input impedance 2.4k ohms
Nominal input level -14dBu
Maximum input level +2dBu
TRS
 
Connector 6.3mm(1/4“)TRS phone jack, Balanced
Input impedance 22k ohms or more
/ 1M ohms(when INPUT H, GUITAR selected)
Nominal input level +4dBu
Maximum input level +20dBu
STEREO OUT
 
Connector RCA pin-jack, Unbalanced
Output impedance 200 ohms
Nominal output level -10dBV
Maximum output level +6dBV
EFFECT SENDS  
Connector 6.3mm(1/4“)TS phone jack, Unbalanced
Output impedance 200 ohms
Nominal output level -10dBV
Maximum output level +6dBV
MONITOR OUT  
Connector 6.3mm(1/4“)TRS phone jack, Balanced
Output impedance 200 ohms
Nominal output level -2dBu
Maximum output level +14dBu
PHONES
 
Connector 6.3mm(1/4“)stereo phone jack
Maximum output level 70mW + 70mW (THD+N 0.1% or less, 32 ohms loaded)
USB  
Connector
USB Mini-B type 4-pin
Format USB2.0 High-Speed mass-storage class
REMOTE
 
Connector
2.5mm TRS jack
Power Dedicated AC adapter (TASCAM GPE248-120200-Z, included)
Power consumption 12W (when phantom power supplying)
Dimensions 514(W)×100.4(H)×336.9(D)mm / 20.2“(W)×4.1“(H)×13.4""(D)
Weight 6.2kg / 13.67 lb
Accessories AC adapter, 4GB SD card, warranty card, owner's manual

 

Audio performance
Frequency response 20Hz to 20kHz (+/-1dB, INPUT to STEREO OUT/EFFECT SENDS/MONITOR OUT)
S/N Ratio 90dB or greater (INPUT to STEREO OUT/EFFECT SENDS/MONITOR OUT)
THD 0.01% or less (INPUT to STEREO OUT/EFFECT SENDS/MONITOR OUT)

 

Operating system requirements
Windows  
OS Windows XP, Windows Vista, Windows 7, Windows 8
CPU Pentium 300MHz or more
Memory 128MB or more
USB USB2.0
Macintosh  
OS Mac OS X Snow Leopard(V10.6), OS X Lion(V10.7), OS X Mountain Lion(V10.8), OS X Mavericks(V10.9)
CPU Power PC, iMAC, G3, G4 266MHz or more
Memory 64MB or more
USB USB2.0

 

Korg D-4 Digital Recording Studio

High-performance recording studio in a
friendly, compact package

Welcome a new member to Korg?s lineup of D-series recorders - acclaimed for their superb audio quality and intuitive ease-of-use. About the same size as a VHS video tape, the D4 Digital Recorder contains built-in effects, rhythms, and a tuner, everything needed to plug in a guitar or mic and start recording right away. Five real-time knobs provide immediate control over numerous functions, including a full array of Korg?s proprietary ?REMS? modeling effects. These same knobs perform double duty as Pan knobs and Record Select buttons; an informative backlit LCD screen keeps it all together. Inside, you?ll find powerful recording and sophisticated editing functions that rival high level models. There?s even a USB connector that makes it easy to transfer song data to a computer. With enormous potential packed into its small size, the D4 is the ideal partner for your creative music life.

Main features
? 4-Track digital recorder features 8 virtual tracks per track, for a total of 32 tracks.
? Two tracks of simultaneous recording.
? High audio quality with extended recording times using MPEG1 Layer 2 compressed recording format.
? XLR and 1/4 inch inputs accommodate both a microphone and/or guitar.
? Intuitive user interface provides plenty of knobs for easy operation.
? Instantly recall frequently-used effect settings, including custom-tailored settings, using the Favorites knob.
? Five knobs (with push-button function) allow for easy effect editing and pan control.
? Full suite of non-destructive editing tools includes punch-in/out, bounce, copy/paste, delete ? even pro-level functions such as time compression/expansion are provided.
? Korg?s proprietary ?REMS? modeling technology delivers 93 effect types that can be used for guitar, insert, master, or final effect processing. There are 100 preset effect programs ready for immediate use, and 100 user program locations.
? High-capacity CompactFlash data storage.
? Transfer data to a computer quickly and easily via the USB connector.
? Built-in mic allows immediate recording on the go.
? 87 Rhythm / metronome patterns and a chromatic tuner are built-in.
? The custom LCD display is backlit for easy visibility - even in dark locations.
? AC adaptor and 64 MB CompactFlash media are included.

A studio that?s just the right size
The D4 is a complete four-track recording studio, providing multi-effects based on Korg?s proprietary ?REMS? modeling technology, and an array of rhythm and metronome patterns to compliment any musical style. Just plug a guitar or microphone into the D-4 and you can begin creating your own song a track at a time. Eight virtual tracks are provided for each track, so you can choose the best take as you build your song. The D4 records directly to CompactFlash using one of three modes ?High Quality, Standard or Economy ? providing extended recording time with great audio quality. CompactFlash cards of up to 2 GB* may be used and each one can store up to 99 songs, recorded and saved in MP2 (MPEG-1 Layer-2) format. A built-in mic lets you make quick musical memos as inspiration comes to you. There?s also a built-in tuner, ensuring that you?ll be in tune whenever you record.

*maximum recording time = 72 hours, single track using Economy mode with a 2 GB CompactFlash.

Simple, easy-to-use controls, including
new ?turn and push? knobs
Despite its compact size, the D4 offers quick and convenient control of its many professional features and rich functionality. A single knob takes you from mode to mode. Five dedicated knobs provide real-time editing of the onboard REMS effects. By pushing down on these same knobs you can select recording status of each track and turn effects on and off. There?s also a ?favorites knob? that lets you instantly recall eleven of your favorite effects. The Value Dial provides a quick way to change settings and select various options. With trim knobs on both inputs (XLR and 1/4" are provided for Input 2, 1/4" only on Input 1), you?ll be able to get the optimum level in any recording situation.

A full suite of editing tools
bring a final polish to your song
The D4 provides the functionality and flexibility you?ve come to expect from Korg digital recorders, including copy, delete, punch-in recording and more. Bounce recording combines multiple tracks into one ? with no loss of fidelity ? and frees up tracks for additional recording. You can also use professional time compression/expansion editing functions to alter previously-recorded phrases so they match the tempo of your song.

“REMS" modeling effect technology
KORG?s proprietary "REMS" (Resonant structure and Electronic circuit Modeling System) modeling technology simulates the audio characteristics of many classic guitar amps, legendary recording microphones and numerous effects with startling realism, adding depth and character to your original recordings. The AMP effect faithfully recreates a range of amps; from classics such as the VOX AC30TB through today?s latest guitar amps. The CABINET effect accurately simulates a wide variety of speaker cabinets that match the various AMP types. The 4-BAND EQ allows you to make detailed adjustments to the tonal character and you can also apply chorus, phaser, and flanger type MODULATION effects. For recording bass parts, the BASS DRIVE and BASS CABINET effects provide a broad spectrum of bass sounds that perfectly simulate the character of various bass rigs. When it comes time to add vocals ? or another acoustic instrument ? the mic simulator recreates the ideal tonality for various recording applications.

What is REMS?
REMS (Resonant structure and Electronic circuit Modeling System) is Korg?s proprietary modeling technology that digitally simulates a wide range of factors that affect sound, including the sound-producing mechanism of acoustic and electric/electronic instruments, the body and cabinet resonances that affect the tone, the spatial character of the sound field in which the sound is heard, the electrical and acoustical response of the mics and speakers that are in the sound-transmission path, and the way in which electrical circuits such as vacuum tubes and transistors affect the tone.

Create multi-effect ?chains? using up to five simultaneous effects
The D4 digital recorder provides four types of effect chains, in which up to five effects can be connected in a specified order. This makes it easy to create multi-effects that are suitable for the material you?re recording. These effect chains are stored as programs, with 100 user and 100 preset locations for easy access. The presets contain programs created by professional musicians and studio engineers and are ready to use. You can edit the effects in a program and store it in the user program area. Four chain types are provided. [GUITAR/MIC] is used when applying effects to a mono input, such as guitar or vocal; [INSERT/GTR+VO] is for use with a stereo input, or when applying separate effects to a vocal track and a guitar track that are being recorded simultaneously; [MASTER] makes the overall sound more consistent; and [FINAL], which applies overall adjustments to the final output stage. A dedicated switch is provided to select each chain type. No complicated operations are required, letting you concentrate on your recording.

High-quality PCM rhythms
Inside the D4 is a PCM sound generator that can produce 87 different rhythm patterns (32 metronome patterns and 55 rhythm patterns). The rich array of patterns include 8 beat, 16 beat, Rock, Funk, Big Beat, House, Reggae, Hip-Hop, R&B, Disco, Dance, Jazz, 3/4, 6/8, 5/4, and 7/4, covering a broad range from simple beats to highly distinctive styles. These rhythm patterns may be used as recording guides, or as an easy way to create tracks.

Reliable, convenient CompactFlash storage
CompactFlash capacities of 16 MB ? 2 GB are supported for data storage.*1*2 The data is written automatically when you?ve finished recording or editing. The D4 also provides a USB connector, so it?s easy to transfer song data and user effect data to your computer for backup.*3 Completed songs created within the D4 as stereo MPEG format*4 song files, can be played back as stereo MPEG files on your computer.*5 This also makes it easy to distribute or exchange data on the Internet.

*1 One (1) 64 MB CompactFlash card containing demo song data is included.
*2 CF TYPE I cards only. CF TYPE II cards are not supported.
*3 USB connection requires Windows 2000/Me or later, or Mac OS 9.0.4 or later. If your computer does not have a USB connector, you can still use a card reader/writer to backup data that?s stored on the card.
*4 MPEG1 Layer2 format.
*5 Windows Me, Windows 2000, Mac OS 9.0.4, or later systems are supported - when using a PC with an audio card that supports 32 kHz.

Recorder Section:
  Number of Tracks:
  4 tracks x 8 virtual tracks; 4 tracks simultaneous playback /2 tracks simultaneous recording
 
  Recording Format:
  16 bit MPEG 1 Layer 2 compression, 32 kHz
 
  Recording Time:
  Hi Quality = approx. 44 minutes /1 track
Standard = approx. 64 minutes /1 tracks
Economy = approx. 132 minutes /1 track
(when using 64 MB CompactFlash), maximum of approx. 4200 minutes /1 track (Economy, when using 2 GB CompactFlash)

* Recording time may vary slightly depending on conditions of use.
 
  Number of Songs:
  99 songs per card
 
  Tempo:
  40 ~ 240
 
  Metronome Patterns:
  32
 
  Rhythm Patterns:
  55
 
  Track Editing:
  Copy, Insert, Erase, Delete, Time Expansion/Compression
 
  Song Editing:
  Rename, Copy, Delete
 
  Counter:
  Min/Sec/Msec, Meas/Beat/Tick
 
 
Mixer Section:
  Structure:
  4 ch + 2 ch (when using sub-input function)
 
 
Effect Section:
  Structure:
  Guitar/Mic, Insert/Guitar+Vocal, Master, Final;
One of the above effects can be selected for use.
 
  Effects:
  100 presets / 100 users
 
 
Tuner:
  Detection Range:
  27.5 Hz ~ 2093 Hz
 
  Calibration:
  fixed at A=440 Hz
 
 
Card:
  Usable Type:
  16 MB ~ 2 GB CompactFlash
 
 
General:
  Power Supply:
  Included AC adapter
 
  Dimensions:
  7.52? (W) x 5.71? (D) x 1.61? (H)
191 (W) x 145 (D) x 41 (H) mm
 
  Weight:
  0.91 lbs./415 g
 
 
Analog/Digital Input/Output Specifications:
  A/D, D/A Conversion:
  20 bit
 
  Sampling Frequency:
  32 kHz
 
 
INPUT 1, 2:
  Connector:
  ψ6.3 mm phone jacks (unbalanced), XLR-3-31 type (balanced); when selecting INPUT 2 MIC
 
 
LINE:
  Input Impedance:
  22 kOhm
 
  Rated Level:
  -32 dBu (INPUT LEVEL = Max),
+4 dBu (INPUT LEVEL = min)
 
  Maximum Level:
  -18 dBu (INPUT LEVEL = Max),
+16 dBu (INPUT LEVEL = min)
 
  Source Impedance:
  600 Ohm
 
 
MIC:
  Input Impedance:
  10 kOhm: ψ6.3 mm phone jack (unbalanced),
10 kOhm: XLR-3-31 type (balanced)

 
  When using phone jack (unbalanced):
  Rated Level: -52 dBu (INPUT LEVEL = max)
-16 dBu (INPUT LEVEL = min)
Maximum Level: -40 dBu (INPUT LEVEL = max)
-4 dBu (INPUT LEVEL = min)

 
  When using INPUT 2 XLR (balanced):
  Rated Level: -60 dBu (INPUT LEVEL = max)
-28 dBu (INPUT LEVEL = min)
Maximum Level: -48 dBu (INPUT LEVEL = max)
-16 dBu (INPUT LEVEL = min)
Source Impedance: 600 Ohm

 
 
GTR:
  Input Impedance:
  890 kOhm

 
  Rated Level:
  -30 dBu (INPUT LEVEL = max)
+4 dBu (INPUT LEVEL = min)
 
  Maximum Level:
  -18 dBu (INPUT LEVEL = max)
+16 dBu (INPUT LEVEL = min)
 
  Source Impedance:
  600 Ohm
 
 
OUTPUT:
  Connector:
  RCA phono jacks

 
  Output Impedance:
  1 kOhm
 
  Maximum Level:
  +2 dBu
 
  Rated Level:
  -10 dBu
 
  Load Impedance:
  Greater than 10 kOhm
 
 
Phones Output:
  Connector:
  Mini-stereo phone jack

 
  Output Impedance:
  10 Ohm
 
  Maximum Level:
  15 mW @ 33 Ohm
 
 
Foot Switch:
  Connector:
  ψ6.3 mm phone jack (use separately sold
PS-1 foot switch)


 
 
USB:
  Connector:
  Type B

 
  Supported OS:
  Windows Me/2000 or later, Mac OS 9.0.4 or later
 
 
Included Items:
  CompactFlash, AC adapter
 
 
D4 Options:
  PS-1 Foot Switch

 


The HD-R1 Solid State Recorder is a two-channel, single rack-mount recording and playback device created with the sound contractor in mind.

Utilizing the highly reliable Compact Flash Card the HD-R1 records 44.1 to 96kHz, 16/24 bit PCM or MP3 files. The ability to control the HD-R1 remotely is provided via RS-232, Parallel, and RJ45 100Mbit Ethernet. File transfer can be accomplished via Ethernet and/or USB (type "A" connector).

To further enhance the HD-R1's feature set, Mic preamps (w/20dB pad) and Phantom Power (rear-panel selectable) have been included. The HD-R1 offers a variety of contractor-friendly I/O options; such as, Unbalanced (RCA), Balanced (XLR and Euroblock), and S/PDIF Digital (Coaxial and Optical).

And of course... the traditional source device features are Power-on-Play, Front Panel Rotary Input Level Controls, Headphone Jack with level control, and a variety of Playback Modes.

    * 1U Rack-mount Solid-State Recorder
    * Compact Flash Card
    * USB host interface for USB Flash Cards
    * Audio data formats: PCM (16/24 bit), MP3
    * Sampling rates supported: 44.1, 48, 88.2, 96kHz
    * Mic/Line XLR (with 20dB pad) balanced I/O
    * Phantom Power (rear panel switch and front LED indicator)
    * Euroblock terminal (Input and Output)
    * Unbalanced RCA (Input and Output)
    * Front panel rotary input level controls
    * RS-232 interface for control

    * RJ45 100Mbit/s Ethernet interface for file transfer and control
    * 25-pin parallel remote control interface
    * 16 Direct Play via D=SUb25 pin parallel interface
    * Power on play (front panel selectable)
    * S/PDIF Digital In/Out (Coaxial and Optical)
    * Headphone Jack w/level control
    * Input through and Auto Fade function
    * Input monitoring / mixing of live stereo input along with playback
    * Program Play, Folder Play, Shuffle Play, Interval Play modes, etc...

Weight6.20 kg0.30 kg0.30 kg10.00 kg0.50 kg4.00 kg
DimensionsN/AN/AN/AN/AN/AN/A
Additional information
Weight 6.20 kg
Weight 0.30 kg
Weight 0.30 kg
Weight 10.00 kg
Weight 0.50 kg
Weight 4.00 kg