Balanced XLR output
2 three-pole TQG male inputs (Mini XLR)
Both inputs adjustable
On-off switch
Mic / Line level in the output switchable
9 V battery power
20 hours of operation with 1 battery
Power LED
€61.00 incl. GR VAT
Only 1 left in stock (can be backordered)
EAN: N/A
Balanced XLR output
2 three-pole TQG male inputs (Mini XLR)
Both inputs adjustable
On-off switch
Mic / Line level in the output switchable
9 V battery power
20 hours of operation with 1 battery
Power LED
Weight | 1.00 kg |
---|
T.BONE L-PACK BATTERY PORTABLE PHANTOM POWER FOR TQG (mini XLR) AKG MICROPHONES remove | AKG C 480B-ULS Ultra Low-Noise Preamplifier remove | GRAVITY MA 3D A Traveler 3D Arm remove | Audio Technica ATND8677 Microphone desk stand with Dante™ network output remove | Shure PM4E 6in-6out Personal Monitor Mixer remove | Gravity MA 3D A POP 1 Traveler 3D Arm with Pop Filter remove | |||||||||||||||||||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Name | T.BONE L-PACK BATTERY PORTABLE PHANTOM POWER FOR TQG (mini XLR) AKG MICROPHONES remove | AKG C 480B-ULS Ultra Low-Noise Preamplifier remove | GRAVITY MA 3D A Traveler 3D Arm remove | Audio Technica ATND8677 Microphone desk stand with Dante™ network output remove | Shure PM4E 6in-6out Personal Monitor Mixer remove | Gravity MA 3D A POP 1 Traveler 3D Arm with Pop Filter remove | ||||||||||||||||||||||||||||
Image | ||||||||||||||||||||||||||||||||||
SKU | L-PACK | C 480B-ULS | GMA3DA | ATND8677 | P4ME | GMA3DAPOP1 | ||||||||||||||||||||||||||||
Rating | ||||||||||||||||||||||||||||||||||
Price | €61.00 incl. GR VAT | €543.00 incl. GR VAT | €19.23 incl. GR VAT | €529.00 incl. GR VAT | €167.00 incl. GR VAT | €20.85 incl. GR VAT | ||||||||||||||||||||||||||||
Stock | Only 1 left in stock (can be backordered) | Available on backorder | Only 4 left in stock | Available on backorder | In stock | Available on backorder | ||||||||||||||||||||||||||||
Availability | Only 1 left in stock (can be backordered) | Available on backorder | Only 4 left in stock | Available on backorder | In stock | Available on backorder | ||||||||||||||||||||||||||||
Add to cart | ||||||||||||||||||||||||||||||||||
Description |
|
| ||||||||||||||||||||||||||||||||
Content | Portable Battery phantom power supply for microphones with TQG and AKG connection. Balanced XLR output 2 three-pole TQG male inputs (Mini XLR) Both inputs adjustable On-off switch Mic / Line level in the output switchable 9 V battery power 20 hours of operation with 1 battery Power LED |
The AKG C 480 B preamplifier powering unit is the latest model in the ULS series. It accommodates the CK 61/ULS, CK 62/ULS, CK 63/ULS capsules and the new CK 69/ULS shotgun capsule, providing a higher order of performance for these capsules than previously available. The new preamp has a vastly improved noise floor, permitting self noise performance with the four associated capsules in the range of 9 to 11 dB-A. Maximum sound pressure levels in the range of 144 dB (in the -10 dB sensitivity position) can be attained with no greater than 0.5% distortion, giving the capsules a new level of overall performance. An integral low cut filter (12 dB/octave) can be set for either 150 or 70 Hz. The +6 dB sensitivity position is intended to enhance the performance of the CK 69/ULS interference tube capsules, which normally operate over large distances. With the available CK 61/ULS cardioid, CK 63/ULS hypercardioid, CK 62/ULS omnidirectional, and highly directional CK 69/ULS shotgun element, the C 480 Series is intended primarily for studio, broadcast and a variety of live sound and speech reinforcement applications in which state-of-the-art performance is required. A complete line of optional accessories is available. The C 480 B operates only on 48 volts phantom powering. Check the Related Products. Features:
Specifications:
| The Gravity MA 3D A lets you attach microphones, action cams and mobile phone holders to your microphone stand, and set them up flexibly. Its fastening mechanism is quick and easy to assemble. The large clamping range from 15 to 35 mm and the three joints' 360° rotation options allow you to install it as you like. Simply loosen, adjust and tighten the wing-screws.
Material: Plastic , Polyamide
Joint adjustment: Wing screw
Joint rotation: 360°
Joint tilt: 180°
Arm length: 400 mm
Suitable for mounting on: Microphone Stands
Suitable for tube diameter: 15 mm - 35 mm
Colour: Black
Thread size: 3/8”
Weight: 0,302 kg
|
Features
Description The ATND8677 is a Dante-enabled microphone desk stand for use with any gooseneck microphone with a three-pin XLRM-type output connector. The desk stand is designed for surface-mount applications such as high-quality sound reinforcement, conferencing, distance learning and other demanding sound pickup applications. The desk stand features a touch-sensitive capacitive-type user switch with integral red/green LED status indicator. In Local mode the user switch mutes and unmutes the microphone. It can be set to toggle between live and muted audio (toggle on/off), to permit live audio only while the switch is pressed (press to talk), or to mute the audio while the switch is pressed (press to mute). In Remote mode the user switch can be used to trigger functions on compatible Dante-enabled devices, such as a video cameraʼs pan/tilt or a roomʼs lighting preset. While in Remote mode the desk standʼs audio output is controlled remotely. An integral 80 Hz low-cut UniSteep® filter provides easy switching from a flat frequency response to a low-end roll-off. The roll-off position reduces the pickup of low-frequency ambient noise (such as traffic, air-handling systems, etc.), room reverberation and mechanically coupled vibrations. A three-position input gain level selector permits trim adjustment to accommodate louder and softer voices. The desk stand provides 12V DC phantom power by default, which can be switched off and on. The gain, low-cut UniSteep® filter, red/green LED status indicator and phantom power can all be controlled locally or remotely via third-party software.* Recessed buttons on the bottom of the desk stand allow user to configure the desk stand settings locally. Audio, low-cut, gain and phantom power settings can be locked in Local mode by pressing and holding the lock button. This lock will prevent end users from adjusting the settings. Default settings for the stand are as follows: audio toggle on/off (with audio muted at power up), low-cut filter off, +30 dB input gain, phantom power on.
|
Shure PM4E 6in-6out Personal Monitor Mixer The P4M is a highly versatile four-channel, two-bus stereo mic/line mixer designed to optimizeuse of personal (in-ear) monitors like the Shure PSM 400 in live performance. The P4M features four balanced mic/line inputs, each with level and panning controls. Corresponding XLR split outputs allow input signals to pass through the unit unaffected, while providing an independent mix. Personal Stereo Monitors When coupled with personal monitors, the P4M allows performers the ability to adjust personal mix levels onstage - even during a performance - without affecting the front-of-house system. This enables users to create and maintain consistent monitor mixes, regardless of what the venue can provide for monitors. The P4M is available individually for use with Shure PSM 600 and PSM 700 Personal Monitor Systems; or packaged with Shure's PSM 400 Hardwired and Wireless Performance Packs. Installed Sound Systems The P4M can also be used as a small "piggyback" mixer in applications such as houses of worship, or courtrooms. The unit acts as a console bypass when a permanent installation of a large, operator-controlled mixing console may require just a few microphones for smaller events. This allows the user easy access and control of up to four signals without having to utilize the larger console. Given its dual-bus output capabilities, the P4M can also serve as a "two zone" mixer, routing any combination of mic or line-level signals to two different zones. More Than Four Inputs The P4M has a pair of 1/4-inch auxiliary inputs that can be used to add channels from other sources. For example multiple P4M mixers can be linked together to increase the number of inputs. In addition, sources not present in the original mix - such as a click track for live percussion - may be included via the auxiliary inputs. Measurement Conditions (unless otherwise specified): full gain; 1 kHz, one channel activated; >source impedances: Mic 150 ohms, Aux Level 150 ohms; terminations: Line 600 ohms. Frequency Response (Ref 1 kHz, controls centered) 20 Hz to 20 kHz +/- 2 dB Input Specifications Input 1-4 (front panel) Aux In Gain (Maximum) 43 dB 0 dB Impedance (at 1 kHz) 5800 ohms 18 kilohm (each) 9100 ohms (1/L mono) Input Clipping Level +12 dBV +12 dBV Crosstalk -100 dB -90 dB Common Mode Rejection > 75 dB > 70 dB Output Specifications Output Split 1-4 Mix Out Impedance N/A 500 ohm (unbalanced) 1 kilohm (balanced Output Clipping Level N/A +5 dBV (10 kilohm balanced load, -30 dBV input ch. 1-4) Noise (100 Hz to 22 kHz) -110 dBV -100 dBV (all controls CCW) -62 dBV (all controls CW) Distortion (THD) at 1 kHz .0005% | Gravity MA 3D A POP 1 Traveler 3D Arm with Pop FilterThe Traveler Series' Pop Filter with 3D Arm Every bit of weight counts when you're travelling by plane or truck from one gig to the next. After all, you can't always rely on the concert venue having the right tool available for you when needed. The Pop Filter with 3D Arm MA 3D A POP 1 can be taken everywhere you go. It's so light and space-saving, there's absolutely no need for you to worry about weight or storage space. With this tool you can enhance your voice- and vocal recordings by placing the high-quality pop filter, with double nylon mesh and a large screen diameter of 15.7 cm between you and your microphone. This way you avoid unwanted pop noises and clipping. Its fastening mechanism is quick and easy to assemble. The large clamping range from 15 to 35 mm lets you mount it on all popular microphone stands, and the three joints' 360° rotation options allow you to install it as you like. Simply loosen, adjust and tighten the wing-screws. Voila - you're all done! Once set, the MA 3D A POP 1 stays locked in place. Gravity® has once again delivered a small, useful and reliable product for you to round off your collection of stands.
| ||||||||||||||||||||||||||||
Weight | 1.00 kg | 0.45 kg | 0.302 kg | 0.20 kg | 1.20 kg | 0.8 kg | ||||||||||||||||||||||||||||
Dimensions | N/A | N/A | N/A | N/A | N/A | N/A | ||||||||||||||||||||||||||||
Additional information |
|
|
|
|
|
|
Reviews
There are no reviews yet.