| Content |
SUB600s are able to deliver outstanding sound pressure levels in spite of their compact housing, while providing a clean, impressively precise low-end reproduction.
Specifications:
- With 12" woofer and 2.5" voice coil
- Class-D digital amplifier
- Power: 600 W / RMS, 1200 W / peak
- Maximum level: 129 dB
- Frequency range: 46 - 123 Hz
- DSP 28/56 bit
- 2x XLR inputs
- 2x XLR outputs
- M20 tripod thread
- 1x Carrying handle
- Plywood enclosure
- Dimensions (W x H x D): 360 x 550 x 525 mm
- Weight: 19.8 kg
- Colour: Black
|
- EV QuickSmart Mobile application: quickly and wirelessly configure, control and monitor up to six ELX200 loudspeakers simultaneously, and receive immediate notification during critical performance conditions. Bluetooth® is available in select countries.
- QuickSmartDSP features best-in-class processing. Easy setup via three presets, sub/top system-match, five user-programmable presets, visual monitoring of limiter status, input level control and meters, and master volume control to optimize gain structure, all via LCD.
- High-efficiency 1200 W Class-D power amplifier delivers up to 129 dB peak SPL utilizing ultraefficient, high-sensitivity transducer designed and engineered by EV.
- Ideal for portable and installed applications. Professional-grade hardware: integrated M20 threaded pole mount plate and two-handle design for easy lifting.
ELX200-12SP features high-efficiency Class-D power amplifiers (up to 1200 W) with integrated QuickSmartDSP, and delivers up to 129 dB SPL utilizing transducers designed and engineered by EV (12-inch EVS-12L woofer). Powered subwoofer models allow easy setup via three presets (Music, Live, Club), sub/top system-match crossovers, three-band EQ, five user-programmable presets (Store and Recall
settings), visual monitoring of limiter status, input level control and meters, and master volume control to ensure optimal gain structure. ELX200 powered models are ideal for portable and installed applications, with lightweight and compact 15-mm wood enclosures, integrated M20 threaded pole polemount plate, and two-handle design for easy lifting.
The new QuickSmart Mobile wireless control and monitoring application, using Bluetooth® Low Energy (BTLE) technology, allows intuitive system control, configuration and monitoring of up to six powered ELX200 loudspeakers simultaneously. Receive alerts when your system is being overdriven, and control your system while in front of your speakers, not behind. Bluetooth® is available in select countries.
| Available Color | Black | | Connector Type | (2) XLR/TRS combo jacks and (2) XLR link outputs | | Depth | 457mm (18“) | | Specifications |
| Enclosure Material | 15 mm plywood with EVCoat | | Family | ELX200 | | Frequency Range (-10 dB) | 41 Hz – 165 Hz | | Frequency Response (-3 dB) | 49 Hz – 135Hz | | Grille | 18 AWG steel with powdercoat | | Height | 397mm (15.6“) | | LF Transducer | EVS-12L 300 mm (12 in) | | Low Pass Frequency | Adjustable: 80 Hz, 100 Hz, 120Hz, 150 Hz | | Max. SPL/1m (calc) | 129dB | | Power Consumption | 100 - 240 V~, 50 - 60 Hz, 1.8A | | Power Rating | 1200W | | Powered or Passive | Powered | | Shipping Weight | 22.3kg (49.2 lbs) | | Speaker Type | Subwoofer | | Weight Net | 19.1kg (42.1 lbs) | | Width | 445mm (17.5“) | | Woofer Size | 12inch |
|
| Frequency response (-3 dB) |
43 Hz-20 KHz |
| Frequency range (-10 dB) |
37 Hz-20 KHz |
| Maximum SPL |
127 dB |
| Coverage (H x V) |
120° x 40° |
| Amplifier rating |
1000 W |
| LF channel rating |
500 W |
| HF channel rating |
500 W |
| Crossover frequency |
200 Hz |
| Connectors |
2x XLR/TRS Combo Jack Input
1x 3.5 mm Input
1x Stereo RCA Input
1x Wireless Bluetooth® Audio Input
1x XLR THRU Output
1x XLR MIX OUT Output |
| Enclosure |
Sub: 15 mm plywood
Column: Composite
Pole: Aluminum |
| Grille |
Steel with black or white powder coat |
| Color |
Black or white |
| Dimensions (HxWxD): mm (in) |
Sub: 530 x 345 x 471 (20.9 x 13.6 x 18.5)
Column: 825 x 102 x 172 (32.5 x 4.0 x 6.9)
Pole: 929 x 48.5 x 55 (36.6 x 1.9 x 2.2) |
| Net weight |
Sub: 44.66 lb (20.3 kg)
Column: 10.34 lb (4.7 kg)
Pole: 2.75 lb (1.25 kg)
Sub cover: 0.9 lb (0.4 kg)
Bag for column and pole: 1.87 (0.85 kg) |
| Shipping weight |
Sub box: 50.71 lb (23 kg)
Column box: 18.30 lb (8.3 kg) |
| Power consumption3 |
100-240 V AC, 50-60 Hz, 1.5-0.6 A |
|
Features
Lightweight portable powered speakers with legendary QSC amplifier power and reliability
1000 watt continuous Class D power module
Extensive DSP enhances system performance
Attractive and professional appearance
Rugged birch plywood enclosure
Comfortable ergonomic handles
Threaded pole socket with speaker pole included
The KSub is a dual-12" bandpass design, constructed of premium birch and includes high-quality, low-noise casters. The subwoofer features a threaded pole receptacle for a positive, wobble free connection to a threaded speaker pole (included).
Remote gain control capability is offered via a potentiometer (not included) connected to the on-board Euroblock connector. In an installed application, multiple K Series speakers can be "daisy-chained" for total gain control from a single remote pot. Auto-standby mode is engaged after 5 minutes of inactivity.
Extensive DSP
DMT™ (Directivity Matched Transition) provides for matched LF and HF coverage across the entire listening area, eliminating unnatural "dead" or "hot" frequency zones.
Intrinsic Correction™, first featured in our high-end line-array products maps 65-75 spacially-averaged measurements to IIR and FIR filters that actively adjust time, frequency and amplitude response to a maximally flat bandpass target. The result is a speaker that behaves equally well across the entire sound field.
DEEP™ and excursion limiting allow for extended low-frequency response by actively managing low-frequency transients without degradation of the underlying signal or adjacent frequencies.
GuardRail™ protection, first introduced on our GX Series amplifiers protects both the amplifier module and your performance from unnatural and destructive clipping.
SPECIFICATIONS
Configuration 4th Order Bandpass
Transducers
Low-frequency
2 x 12" cone transducers
Frequency Response (-6 dB) 48 Hz - 134 Hz
Frequency Range (-10 dB) 44 Hz - 148 Hz
Maximum SPL1 130 dB peak
Amplifiers
Power Output2 1000 W continuous Class D (2x500 W)
2000 W peak
Input Impedance (ohms) XLR / ¼“: 40k balanced / 20k unbalanced
Controls Power, Gain, LF Mode (Normal/DEEP™), Polarity (Normal/Reverse), Front LED (On/Off/Limit)
Indicators Power, Signal, Standby, Limit
Connectors Dual balanced female XLR/¼" line level input, Dual Balanced male XLR full range line level out, Remote gain control, Locking IEC power connector
Cooling On demand, 50 mm variable speed fan
Amplifier Protection Thermal limiting, output overcurrent, overtemperature muting, GuardRail™
Transducer Protection Thermal limiting, excursion limiting
AC Power Input Universal power supply 100 - 240 VAC, 50 - 60 Hz
AC Power Consumption
(1/8 Power) 100 VAC, 2.3 A
120 VAC, 2.01 A
230 VAC, 1.13 A
Enclosure
Material Painted birch plywood
Finish Black textured paint
Dimensions (HWD) 26" x 14" x 28.1" (including casters)
665 mm x 356 mm x 714 mm
Weight (Net) 74 lb / 33.6 kg
Available Accessories KSub COVER
1 For comparison purposes and in accordance with common industry practice, maximum peak SPL specifications are theoretical calculations based upon transducer sensitivity and peak available amplifier power.
2 Independent of limiters and driver protection circuits.
|
The black Polk Audio Monitor XT12 12" 100W Subwoofer provides Polk's loud, low, effortless bass so you can enjoy movies, music, and gaming with more impact and excitement. Easily integrated into any home theater or music listening environment and featuring new woofer, amplifier, and cabinet designs, the XT12 fulfills the Polk promise of great sound for all.
Polk has always been known for speakers that produce deep, powerful, effortless bass, and the Monitor XT12 is no exception. A 12" Dynamically Balanced woofer in a ported cabinet, powered by a clean and ultra-efficient 100W Class A/B amplifier, delivers bass as low as 24 Hz, adding more punch and impact to your favorite music, movies, and video games.
When you want bass this loud and this low, your subwoofer needs more than a great woofer and powerful amplifier to make it seem effortless. The Monitor XT12 is housed in a critically braced MDF cabinet with a removable, precision-fit grille to isolate the sound of the woofer while minimizing unwanted resonances and sonic interference.
The Monitor X12 features a consistently variable crossover, polarity, and volume control to seamlessly blend the massive bass it provides with your system. In addition, the Monitor XT12 offers line level, LFE, and nickel-plated binding post inputs, ensuring compatibility with your receiver. Plus, the XT12 is perfect for the modern trend of integrating two subs into your home theater for even more bass while smoothing out the low frequencies throughout the room.
The Monitor XT series was designed with quality, timbre-consistent components throughout to enable you to mix and match models to build your dream home theater or music listening setup. Matched components provide a unified sound field with seamless speaker-to-speaker blending for truly immersive listening experiences.
|
Need a powerful bass enhanced system that wonʼt completely fill your van?
The ART 902-AS active subwoofer is what youʼre looking for.
Thanks to the newly designed 12” high power neodymium woofer it delivers granite like bass punch for any kind of application in a compact and easy to transport enclosure.
The cabinet is made in Baltic Birch and heavy duty painted to withstand the life on the road.
| Acoustical Specifications |
|---|
| Frequency Response -3 dB: | 45 Hz | ÷ 120 kHz | | Max SPL: | 130 dB | | | Woofer: | 12“, 3" v.c. | |
| INPUT/OUTPUT SECTION |
|---|
| Input signal: | Bal / unbal | | | Input connectors: | Stereo combo xlr-jak | | | Output connectors: | Stereo xlr | | | Input sensitivity: | -2 dBu / +4 dBu | |
| PROCESSOR SECTION |
|---|
| Crossover frequencies: | 80 - 120 Hz | | | Protections: | Thermal, rms | | | Limiter: | Limiter | | | Controls: | Volume, phase, xover | |
| AMPLIFIER SPECIFICATIONS |
|---|
| Total power: | 1000 Watts | | | Low frequencies: | 1000 Watts | | | Cooling: | Convection / forced | | | Connections: | VDE connector in / out | |
| CABINET |
|---|
| Cabinet Material: | Balitc birch | | | Handles: | 2 on side | | | Pole Mount/Cap: | Yes | | | Colour: | Black | |
| PHYSICAL SPECIFICATIONS |
|---|
| Height: | 515 / 20.27 mm/inch | | | Width: | 410 / 16.14 mm/inch | | | Depth: | 550 / 21.65 mm/inch | | | Net Weight: | 29.6 / 65.25 Kg/Lbs |
|
Reviews
There are no reviews yet.