dB Technologies Arena-8 PASSIVE LOUDSPEAKER 200W 8”

Specifications

Technical data

Speaker Type    2-Way Passive Speaker
Acoustical data

Nominal Power Rating    200 W/RMS
Peak Power Rating    400 W/RMS
Impedance    8 Ohms
Frequency Response [+/- 3dB]    100 - 19.000 Hz
Max SPL    122 dB
HF    1 "
Driver Protection    PTC
Directivity    90x70 °
Horn    CD Horn
Rotatable Horn    Yes
Crossover Frequency (passive)    2100 Hz
Slope MF-HF    18 dB/Octave
LF    8 "
Voice Coil LF    1.5 "
Input Section

Signal Input    1x Speakon
Pin 1+=+
Pin 1-=-
Signal Output    1x Speakon
Pin 1+=+
Pin 1-=-
Mechanics

Housing    Multiplex birch plywood
Housing Design    Multifunctional
Color    Black
Surface Texture    Textured acrylic lacquer
Handles    1x on top
Pole Mount    36mm
Angles Up    Monitor use 45 °
Front Grille    Metall grille with acoustic foam in front
Rigging Points    12 x M8
Width    270 mm (10.8 in)
Height    458 mm (18.32 in)
Depth    270 mm (10.8 in)
Weight    9.3 kg (20.5 lbs)

Ειδική έκδοση του AM 7200/95 για χρήση σε
εξωτερικό περιβάλλον με επιπλέον αναβάθμιση
14 σημείων. Πιστοποίηση IP55 κατά πρότυπο IEC
529. Παράδοση κατόπιν παραγγελίας.  

* 90° x 50° Coverage, rotatable for use in either vertical or horizontal orientation.

    * CMCD™ Cone Midrange Compression Driver provides low midrange distortion, increased sensitivity, extended bandwidth and improved phase coherency.

    * 2432H High-Frequency Compression Driver

    * PT™ Progressive Transition Waveguide for excellent pattern control with low distortion.

    * Bi-Amp/Passive Switchable.

    * Optional planar array frame kits for a number of array configurations (see AE Series Array Guide).


Frequency Range (-10 dB)       :       260 Hz – 20 kHz

Frequency Response (±3 dB)       :       330 Hz – 18 kHz

Coverage Pattern       :       90°x 50°, rotatable waveguide

Directivity Factor (Q)       :       11

Directivity Index (DI)       :       10.5 dB

Crossover Modes       :       Bi-amp/Passive switchable

Crossover Frequency       :       2.2 kHz

Transducer Power Rating (AES)       :       MF: 350 W (1400 W peak), 2 hrs
HF: 100 W (400 W peak), 2 hrs

Long-Term System Power Rating (IEC)       :       MF/HF: 200 W (800 W peak), 100 hrs

Maximum SPL5       :       Bi-amp mode:
MF/HF: 133 dB-SPL cont avg (139 dB peak)
Passive mode:
MF/HF: 133 dB-SPL cont avg (139 dB peak)

System Sensitivity (1W @ 1m)       :       Passive mode: 108 dB SPL

Nominal Impedance       :       8 ohms

Midrange Driver       :       JBL CMCD-82H Cone Midrange Compression Driver with integral 200 mm (8 in) diameter Differential Drive® dual voice-coil internal driver

Sensitivity (1W @ 1m)
(Midrange)       :       108 dB SPL

High Frequency Driver       :       JBL 2432H, 38 mm (1.5 in) exit compression driver, 75 mm (3 in) voice coil

Sensitivity (1W @ 1m)
(High Frequency)       :       113 dB SPL

Waveguide       :       PT-K95MH

Enclosure       :       Trapezoidal with 15 degree side angles, 16 mm (5/8 in) exterior grade 11-ply Finnish birch plywood

Suspension Attachment       :       13 points (3 top, 3 bottom, 2 each side, 3 rear), M10 threaded hardware

Finish       :       Black DuraFlex™ finish.
White available upon request.

Grille       :       Powder coated 14 gauge perforated steel, with acoustically transparent black foam backing.

Input Connector       :       NL4 Neutrik Speakon® and CE-compliant covered barrier strip terminals. Barrier terminals accept up to 5.2 sq mm (10 AWG) wire or max width 9 mm (.375 in) spade lugs. Speakon in parallel with barrier strip for loop-through.

Environmental Specifications       :       Mil-Std 810; IP-x3 per IEC529.

Dimensions (H x W x D in vertical cabinet orientation)       :       548 x 561 x 657 mm
(21.6 x 22.1 x 25.9 in)

Net Weight       :       27.2 kg (60 lb)

Optional Accessories       :       M10 x 35 mm forged shoulder eyebolts with washers. Optional planar array frame kit. See AE Series Bracket Guide.

    * 60° x 40° Coverage, rotatable for use in either vertical or horizontal orientation.

    * CMCD™ Cone Midrange Compression Driver provides low midrange distortion, increased sensitivity, extended bandwidth and improved phase coherency.

    * 2432H High-Frequency Compression Driver

    * PT™ Progressive Transition Waveguide for excellent pattern control with low distortion.

    * Bi-Amp/Passive Switchable.

    * Optional planar array frame kits (see AE Series Array Guide).


Frequency Range (-10 dB)       :       260 Hz – 20 kHz

Frequency Response (±3 dB)       :       330 Hz – 18 kHz

Coverage Pattern       :       60° x 40°, rotatable waveguide

Directivity Factor (Q)       :       20

Directivity Index (DI)       :       13 dB

Crossover Modes       :       Bi-amp/Passive switchable

Crossover Frequency       :       2.3 kHz

Transducer Power Rating (AES)       :       MF: 350 W (1400 W peak), 2 hrs
HF: 100 W (400 W peak), 2 hrs

Long-Term System Power Rating (IEC)       :       MF/HF: 200 W (800 W peak), 100 hrs

Maximum SPL       :       Bi-amp mode:
MF: 133 dB-SPL cont avg (139 dB peak)
HF: 135 dB-SPL cont avg (141 dB peak)
Passive mode:
MF/HF: 133 dB-SPL cont avg (139 dB peak)

System Sensitivity (1W @ 1m):       :       Passive mode: 108 dB SPL

Nominal Impedance       :       8 ohms

Midrange Driver       :       JBL CMCD-82H Cone Midrange Compression Driver with integral 200 mm (8 in) diameter Differential Drive® dual voice-coil internal driver

Sensitivity (1W @ 1m)
(Midrange)       :       108 dB SPL

High Frequency Driver       :       JBL 2432H, 38 mm (1.5 in) exit compression driver, 75 mm (3 in) voice coil

Sensitivity (1W @ 1m)
(High Frequency)       :       115 dB SPL

Waveguide       :       PT-K64MH

Enclosure       :       Trapezoidal with 15 degree side angles, 16 mm (5/8 in) exterior grade 11-ply Finnish birch plywood

Suspension Attachment       :       13 points (3 top, 3 bottom, 2 each side, 3 rear), M10 threaded hardware

Finish       :       Black DuraFlex™ finish.
White available upon request.

Grille       :       Powder coated 14 gauge perforated steel, with acoustically transparent black foam backing.

Input Connector       :       NL4 Neutrik Speakon® and CE-compliant covered barrier strip terminals. Barrier terminals accept up to 5.2 sq mm (10 AWG) wire or max width 9 mm (.375 in) spade lugs. Speakon in parallel with barrier strip for loop-through.

Environmental Specifications       :       Mil-Std 810; IP-x3 per IEC529.

Dimensions (H x W x D in vertical cabinet orientation)       :       548 x 561 x 657 mm
(21.6 x 22.1 x 25.9 in)

Net Weight       :       27.2 kg (60 lb)

Optional Accessories       :       M10 x 35 mm forged shoulder eyebolts with washers. Optional planar array frame kit. See AE Series Bracket Guide.

The Monitor 88 is the result of extensive research in the development of new transducers and crossover design. The result is a product with exceptional fidelity, the ability to produce deep controlled bass and extended high frequencies without sacrificing efficiency.
The low-frequency 8“driver ʼs low-mass, carbon fiber diaphragm remains extremely rigid at high power levels,producing a more linear response and lower distortion.
The high-frequency section features a constant directivity horn with a built-in mechanical phase equalizer.
The horn is driven by a Ferrofluid® cooled,1“titanium dome tweeter.
All components are housed in a vented enclosure formed from semiexpanded polystyrene foam.
The speaker system is available in black (Monitor 88)or white (Monitor 88W).

The D 8 is a light-weight, robust 8“/1”, 2-way plastic cabinet for professional sound reinforcement applications. With a variety of suspension accessories and conservative cosmetics, the D 8 is ideally suited to be used in demanding fixed installations.
The cabinet is manufactured from ABS and therefore is extremely resistant against abuse on the road. For low and mid frequencies a DYNACORD DND8200-8 neodymium transducer is used. The Electro-Voice DH3 driver is used for the projection of the high frequencies. The Constant-Directivity HF horn has been integrated into the baffle by CAD methods. The nominal coverage angle of the cabinet is 90°*90°, horizontal*vertical, respectively.
Power handling of the cabinet is 250 W (rated) and 1000W (peak). The maximum sound pressure level is 124 dB, the frequency range of the D 8 is from 65Hz to 20kHz. The D 8 is ideally suited for applications as full-range cabinet or as Mid-Hi cabinet in high-performance small-format active and passive satellite systems.
Every transducer is protected against short-term thermal overload with thermal cutout switches and halogen protectors. In case of a potential thermal overload the power applied to the speakers is reduced to a safe level. The protection exhibits ʽsoftʼ switching characteristics, so no annoying clicks or pops are audible. The circuitry automatically resets after the voice coil temperature has reached a safe value.
Extremely durable acoustic foam mounted to a strong powder-coated steel grille protects the loudspeaker components against any mechanical damage. The trapezoidally shaped enclosure also allows employing the cabinet in monitoring applications. A stable, integrated carrying handle and the integrated stand socket for pole-mount stands allow easy transportation and set-up. A protective cover is available as an optional accessory.

The D 8 is a light-weight, robust 8“/1”, 2-way plastic cabinet for professional sound reinforcement applications. With a variety of suspension accessories and conservative cosmetics, the D 8 is ideally suited to be used in demanding fixed installations.
The cabinet is manufactured from ABS and therefore is extremely resistant against abuse on the road. For low and mid frequencies a DYNACORD DND8200-8 neodymium transducer is used. The Electro-Voice DH3 driver is used for the projection of the high frequencies. The Constant-Directivity HF horn has been integrated into the baffle by CAD methods. The nominal coverage angle of the cabinet is 90°*90°, horizontal*vertical, respectively.
Power handling of the cabinet is 250 W (rated) and 1000W (peak). The maximum sound pressure level is 124 dB, the frequency range of the D 8 is from 65Hz to 20kHz. The D 8 is ideally suited for applications as full-range cabinet or as Mid-Hi cabinet in high-performance small-format active and passive satellite systems.
Every transducer is protected against short-term thermal overload with thermal cutout switches and halogen protectors. In case of a potential thermal overload the power applied to the speakers is reduced to a safe level. The protection exhibits ʽsoftʼ switching characteristics, so no annoying clicks or pops are audible. The circuitry automatically resets after the voice coil temperature has reached a safe value.
Extremely durable acoustic foam mounted to a strong powder-coated steel grille protects the loudspeaker components against any mechanical damage. The trapezoidally shaped enclosure also allows employing the cabinet in monitoring applications. A stable, integrated carrying handle and the integrated stand socket for pole-mount stands allow easy transportation and set-up. A protective cover is available as an optional accessory.