| Content |
The DVA T4 Top is equipped with a constant directivity horn for the High and Mid section and offers a nominal coverage angle of 100°x15°. The CD-Horn provides high flexibility and a good natured attitude if for instance the Array is not aligned correctly. The DVA uses apart from the formation of cylindrical waves (very much depending on the number of T4 elements) the vector summing of the individual horns. This means that with growing distance to the source (if set up correctly) the listener perceives more and more vector sums of the single elements. However it has to be considered, that the fewer elements are used to spread the sound to a specific area, the stronger must be the curving of them. Thatʼs how the effect of optimised SPL distribution is managed.
Amplifier
|
Amp Technology
|
Digital Class-T, var. clock frequency
| |
Amp Class
|
Class D
| |
HF Amp
|
100 W
| |
MF Amp
|
100 W
| |
LF Amp
|
220 W
| |
Cooling
|
Convection
|
Dimensions:
-
Width 580 mm (23.2 in)
-
Height 240 mm (9.6 in)
-
Depth 327 mm (13.08 in)
-
Weight 13.2 kg (29.1 lbs)
|
The SR-C8S is a 2-way Line Array Speaker featuring wave front control technology which creates a sound field with high sound clarity and uniform sound pressure. Recommended digital processor is the DP-0206 (optional). It can be converted into the bi-amplifier drive system by changing the internal connection.
| Enclosure | Bass-reflex type | | Power Handling Capacity | Continuous program: 360 W (single-amp mode)
Low: 360 W, High: 180 W (bi-amp mode) | | Rated Impedance | 16 Ω (single-amp mode)
Low: 16 Ω, High: 16 Ω (bi-amp mode) | | Sensitivity | 98 dB (1 W, 1 m) (single-amp mode)
Low: 95 dB (1 W, 1 m), High: 110 dB (1 W, 1 m) (bi-amp mode) | | Frequency Response | 65 - 20,000 Hz (when driven with the optional DP-0206's recommended parameters) | | Crossover Frequency | 1,600 Hz (when driven with the optional DP-0206's recommended parameters) | | Directivity Angle | Horizontal: 110゜, Vertical: 15゜ | | Speaker Component | Low frequency: 20 cm (8) cone-type“
High frequency: Wave front control horn 110゜ (horizontal) × 15゜ (vertical)
+ compression driver × 2 | | Input Connector | M5 screw terminal, distance between barriers: 12.2 mm (0.48)“
and Neutrik NL4MP × 2 | | Finish | Enclosure: Plywood, black, urethane paint
Front grille: Punched steel plate, black, paint | | Dimensions | 526.6 (W) × 293 (H) × 294 (D) mm (20.73 × 11.54" × 11.57“) | | Weight | 16 kg (35.27 lb) | | Accessory | M8 connection bolt …4 | | Option | Cluster bracket: SR-CL8
Rigging frame: SR-RF8
Tilt joint bracket: SR-TP8
Digital processor: DP-0206 |
|
The SR-S4S is a two-way line array speaker ideal for short distance sound transmission and configures a line array by arranging speaker elements vertically close to each other. It can be converted into the bi-amplifier drive system by changing the internal connection. It can be used for high-impedance applications with the installation of the optional MT-S0601 Matching Transformer.
| Enclosure | Bass-reflex type | | Power Handling Capacity | Continuous program: 600 W (single-amp mode)
Low 240 W, High 240 W (bi-amp mode) | | Rated Impedance | 8 Ω (single-amp mode)
Low 8 Ω, High 8 Ω (bi-amp mode) | | Sensitivity | 93 dB (1 W, 1 m) | | Frequency Response | 70 - 20,000 Hz (when using DP-0206 (option)) | | Crossover Frequency | 3,500 Hz | | Directivity Angle | Horizontal: 90゜, Vertical: 10゜ | | Speaker Component | Low frequency: 10 cm cone-type × 8
High frequency: 2.5 cm balanced dome-type × 24 | | Input Connector | M5 screw terminal, distance between barriers: 12.2 mm
and Neutrik NL4MP × 2 | | Finish | Enclosure: MDF, white, paint
Front grille: Punched steel plate, white, acrylic paint | | Dimensions | 160 (W) × 892 (H) × 303 (D) mm | | Weight | 16 kg | | Accessory | Bi-amplifier drive rating label …1, Bi-amplifier drive input indication label …1 | | Option | Matching transformer: MT-S0601, Extension plate: SR-EP4,
Flying bracket: SR-FB4, Wall tilt bracket: SR-TB4,
Stand adapter: SR-SA4, Protection pad: SR-PP4,
Digital processor: DP-0206 |
|
The SR-S4LWP is a two-way line array speaker ideal for long distance sound transmission and configures a line array by arranging speaker elements vertically close to each other. It satisfies the water protection requirements set down in the IPX4 Standard. It can be converted into the bi-amplifier drive system by changing the internal connection. It can be used for high-impedance applications with the installation of the optional MT-S0601 Matching Transformer.
| Enclosure | Sealed type | | Power Handling Capacity | Continuous program: 600 W (single-amp mode)
Low 240 W, High 240 W (bi-amp mode) | | Rated Impedance | 8 Ω (single-amp mode)
Low 8 Ω, High 8 Ω (bi-amp mode) | | Sensitivity | 94 dB (1 W, 1 m) | | Frequency Response | 70 - 20,000 Hz (when using DP-0206 (option)) | | Crossover Frequency | 3,500 Hz | | Directivity Angle | Horizontal: 90゜, Vertical: 0゜ (within the range of speaker height) | | Speaker Component | Low frequency: 10 cm cone-type × 8
High frequency: 2.5 cm balanced dome-type × 24 | | Connected Cable | Direct cable withdrawal from internal speaker: φ8.6 mm,
conductor cross section: 1.25 m㎡, 4-core cable, 3 m | | Operating Temperature | -10℃ to +50℃ | | Water Protection | IPX4 | | Finish | Enclosure: Plywood, white, urethane coating
Front grille: Punched stainless steel (SUS304), white, paint | | Dimensions | 160 (W) × 895 (H) × 255 (D) mm (excluding connected cable) | | Weight | 16 kg | | Accessory | Bi-amplifier drive rating label …1, Bi-amplifier drive input indication label …1 | | Option | Matching transformer: MT-S0601, Extension plate: SR-EP4WP,
Wall mounting bracket: SR-WB4WP, Wall tilt bracket: SR-TB4WP,
Protection pad: SR-PP4, Digital processor: DP-0206 |
|
The SR-C8LWP is a 2-way Line Array Speaker featuring wave front control technology which creates a sound field with high sound clarity and uniform sound pressure. Recommended digital processor is the DP-0206 (optional). It can be converted into the bi-amplifier drive system by changing the internal connection.
| Enclosure | Bass-reflex type | | Power Handling Capacity | Continuous program: 360 W (single-amp mode)
Low: 360 W, High: 180 W (bi-amp mode) | | Rated Impedance | 16 Ω (single-amp mode)
Low: 16 Ω, High: 16 Ω (bi-amp mode) | | Sensitivity | 98 dB (1 W, 1 m) (single-amp mode)
Low: 95 dB (1 W, 1 m), High: 110 dB (1 W, 1 m) (bi-amp mode) | | Frequency Response | 65 - 20,000 Hz (when driven with the optional DP-0206's recommended parameters) | | Crossover Frequency | 1,600 Hz (when driven with the optional DP-0206's recommended parameters) | | Directivity Angle | Horizontal: 110゜, Vertical: 5゜ | | Speaker Component | Low frequency: 20 cm (8) cone-type“
High frequency: Wave front control horn 110゜ (horizontal) × 5゜ (vertical)
+ compression driver × 2 | | Connected Cable | Direct cable withdrawal from internal speaker: φ8.6 mm (φ0.34“),
conductor cross section: 1.25 m㎡ (0.05“)
4-core cable, 3 m (9.84 ft)“ |
Water Protection
| Finish | Enclosure: Plywood, black, urethane coating
Front grille: Punched stainless steel, black, paint | | Dimensions | 526.6 (W) × 293 (H) × 296 (D) mm (20.73 × 11.54" × 11.65“)“ | | Weight | 17 kg (37.48 lb) | | Accessory | M8 connection bolt …4 | | Option | Rigging frame: SR-RF8WP
Digital processor: DP-0206 |
|
The VT4882 is designed to deliver high quality soundreinforcement of sub-low frequencies for live music and a variety of sound reinforcement applications.
| Features : | | Specifications : |
- Advanced Technology Components: Differential Drive® Neodymium Magnet, Dual Voice Coil, Direct Cooled™ cone transducers.
| - Advanced Construction Techniques with PlyMax® provide exceptionally rigid, lightweight enclosure.
| - Rugged DuraFlex™ exterior finish; Weatherized components.
| - Integrated Suspension System, premium aluminum fixtures provide rigid, reliable hanging arrays designed for vertical orientation at various angles.
| | |
| Frequency Range | : | 28 Hz - 120 Hz (-10dB) |
| | Frequency Response | : | 32 Hz - 110 Hz (± 3 dB) |
| | Continuous Power Rating | : | 2000W |
| | Sensitivity | : | 95 dB (1w/1m) |
| | Nominal Impedances | : | 2 x 8 ohms |
| | Dimensions (W x H x D) | : | 1013 mm x 457 mm x 858 mm
(39.9" x 18" x 33.8“) |
| | Weight | : | 53.5 kg (118 lb) | | |
|
Reviews
There are no reviews yet.