Content |
SUB600s are able to deliver outstanding sound pressure levels in spite of their compact housing, while providing a clean, impressively precise low-end reproduction.
Specifications:
- With 12" woofer and 2.5" voice coil
- Class-D digital amplifier
- Power: 600 W / RMS, 1200 W / peak
- Maximum level: 129 dB
- Frequency range: 46 - 123 Hz
- DSP 28/56 bit
- 2x XLR inputs
- 2x XLR outputs
- M20 tripod thread
- 1x Carrying handle
- Plywood enclosure
- Dimensions (W x H x D): 360 x 550 x 525 mm
- Weight: 19.8 kg
- Colour: Black
|
Features
Lightweight portable powered speakers with legendary QSC amplifier power and reliability
1000 watt continuous Class D power module
Extensive DSP enhances system performance
Attractive and professional appearance
Rugged birch plywood enclosure
Comfortable ergonomic handles
Threaded pole socket with speaker pole included
The KSub is a dual-12" bandpass design, constructed of premium birch and includes high-quality, low-noise casters. The subwoofer features a threaded pole receptacle for a positive, wobble free connection to a threaded speaker pole (included).
Remote gain control capability is offered via a potentiometer (not included) connected to the on-board Euroblock connector. In an installed application, multiple K Series speakers can be "daisy-chained" for total gain control from a single remote pot. Auto-standby mode is engaged after 5 minutes of inactivity.
Extensive DSP
DMT™ (Directivity Matched Transition) provides for matched LF and HF coverage across the entire listening area, eliminating unnatural "dead" or "hot" frequency zones.
Intrinsic Correction™, first featured in our high-end line-array products maps 65-75 spacially-averaged measurements to IIR and FIR filters that actively adjust time, frequency and amplitude response to a maximally flat bandpass target. The result is a speaker that behaves equally well across the entire sound field.
DEEP™ and excursion limiting allow for extended low-frequency response by actively managing low-frequency transients without degradation of the underlying signal or adjacent frequencies.
GuardRail™ protection, first introduced on our GX Series amplifiers protects both the amplifier module and your performance from unnatural and destructive clipping.
SPECIFICATIONS
Configuration 4th Order Bandpass
Transducers
Low-frequency
2 x 12" cone transducers
Frequency Response (-6 dB) 48 Hz - 134 Hz
Frequency Range (-10 dB) 44 Hz - 148 Hz
Maximum SPL1 130 dB peak
Amplifiers
Power Output2 1000 W continuous Class D (2x500 W)
2000 W peak
Input Impedance (ohms) XLR / ¼“: 40k balanced / 20k unbalanced
Controls Power, Gain, LF Mode (Normal/DEEP™), Polarity (Normal/Reverse), Front LED (On/Off/Limit)
Indicators Power, Signal, Standby, Limit
Connectors Dual balanced female XLR/¼" line level input, Dual Balanced male XLR full range line level out, Remote gain control, Locking IEC power connector
Cooling On demand, 50 mm variable speed fan
Amplifier Protection Thermal limiting, output overcurrent, overtemperature muting, GuardRail™
Transducer Protection Thermal limiting, excursion limiting
AC Power Input Universal power supply 100 - 240 VAC, 50 - 60 Hz
AC Power Consumption
(1/8 Power) 100 VAC, 2.3 A
120 VAC, 2.01 A
230 VAC, 1.13 A
Enclosure
Material Painted birch plywood
Finish Black textured paint
Dimensions (HWD) 26" x 14" x 28.1" (including casters)
665 mm x 356 mm x 714 mm
Weight (Net) 74 lb / 33.6 kg
Available Accessories KSub COVER
1 For comparison purposes and in accordance with common industry practice, maximum peak SPL specifications are theoretical calculations based upon transducer sensitivity and peak available amplifier power.
2 Independent of limiters and driver protection circuits.
|
- 2000W power via ultra-efficient Class-D amplification
- High-power 12″, heat-treated woofer with 3″ voice coil
- Ultra-low frequency extension hits hard down to 35 Hz
- DLP Digital Processor
- Powerful, one-touch digital processor with bright OLED screen
- Precision digital crossover
- Presets for use with DLM and SRM Series full-range loudspeakers
- Variable crossover control for optimization with any loudspeaker
- Six total XLR connects for flexible I/O control
- Two line level inputs
- Two full-range outputs for side fills, etc.
- Two high-pass outputs for direct connection to DLM loudspeakers
- Unmatched system control for professional applications
- Alignment delay up to 300ms for delay stack, balcony, etc.
- Three memory locations for instant venue setting recall
- Smart Protect DSP dynamically protects amp/driver
- Innovative ultra-compact design
- Highest-output compact subwoofer on the market
- Fit an entire DLM system in nearly any car
- Stack them up for storage
- Pole mount a DLM8 or DLM12
- Extremely durable 15mm poplar cabinet
- Rugged, powder-coated 20 gauge steel grille
- Ridiculously lightweight (48 lbs. / 21.7 kg)
|
Extending the ZXA1's size-defying performance and sleek styling into the low-end realm, the ZXA1-Sub packs 700 W of self-powered punch into a low-profile wood enclosure. Match ZXA1 with ZXA1-Sub and hear just how big a small rig can sound, whether you want to add a tight thump to a DJ set or give the highs and mids some breathing room in a live performance.
- 15mm Plywood Enclosure, Internally Braced, with Textured Paint
- EVS-12S 305mm (12“) Woofer for Powerful, Engaging Bass Response
- Class D Lightweight Amplifier
- Pole Mount for Full-Range Systems
- Dual XLR Inputs and Outputs
- Switchable EQ Modes for Different Applications
- LED indicators for Power On and Limit
Amplifier Power | 800 Watts (RMS) | Color | Black | Coverage (Nominal -6 dB) | Omnidirectional | Input Connections | (2) XLR Stereo Input, (2) XLR Stereo Output | Power Requirement | 120V: 90V-132v, 1.0 A, 50-60Hz 230V: 190V-264V, 0.6A, 50-60Hz | Speaker Type | Powered Subwoofer | Frequency Response (-3 dB) | 53-93 Hz Half Space | Frequency Response (-10 dB) | 44-118 Hz Half Space | Max. SPL/1m (calc) | 126 dB Half Space | System Power Handling (Continuous/Program/Peak) | 700 Watts | LF Transducer | (1) EVS-12S, 305mm (12“) Woofer | Crossover Frequency | 100 Hz | Enclosure Material | 9-ply, 15mm Plywood, Internally Braced, with Textured Paint | Outdoor | No | Grill | 16GA Steel with Black Powdercoat | Height | 400 mm (15.75“) | Width | 444.5 mm (17.5“) | Depth | 457.2 mm (18“) | Weight Net | 20.9 kg (46.08 lbs) | Shipping Weight | 26.5 kg (58.42 lbs) |
|
The black Polk Audio Monitor XT12 12" 100W Subwoofer provides Polk's loud, low, effortless bass so you can enjoy movies, music, and gaming with more impact and excitement. Easily integrated into any home theater or music listening environment and featuring new woofer, amplifier, and cabinet designs, the XT12 fulfills the Polk promise of great sound for all.
Polk has always been known for speakers that produce deep, powerful, effortless bass, and the Monitor XT12 is no exception. A 12" Dynamically Balanced woofer in a ported cabinet, powered by a clean and ultra-efficient 100W Class A/B amplifier, delivers bass as low as 24 Hz, adding more punch and impact to your favorite music, movies, and video games.
When you want bass this loud and this low, your subwoofer needs more than a great woofer and powerful amplifier to make it seem effortless. The Monitor XT12 is housed in a critically braced MDF cabinet with a removable, precision-fit grille to isolate the sound of the woofer while minimizing unwanted resonances and sonic interference.
The Monitor X12 features a consistently variable crossover, polarity, and volume control to seamlessly blend the massive bass it provides with your system. In addition, the Monitor XT12 offers line level, LFE, and nickel-plated binding post inputs, ensuring compatibility with your receiver. Plus, the XT12 is perfect for the modern trend of integrating two subs into your home theater for even more bass while smoothing out the low frequencies throughout the room.
The Monitor XT series was designed with quality, timbre-consistent components throughout to enable you to mix and match models to build your dream home theater or music listening setup. Matched components provide a unified sound field with seamless speaker-to-speaker blending for truly immersive listening experiences.
|
Power for the sub, power for satellites and a thumping low end speaker. Smart design. Order today.
The 1,000-Watt INSPIRE iP12B powered subwoofer produces high levels of low-end punch with definition and clarity typical of larger systems. Equipped with a dedicated 600-Watt Class-D amplifier for the 12" long-excursion Low-Frequency (LF) driver and 2 x 200 Watt amps for your passive satellite speakers, the iP12B is ideally suited for small to medium-sized performance venues, houses of worship, boardroom presentations, nightclubs and much more. Lightweight (only 22.3 kg / 49.2 lbs) and easy to transport, the iP12B also features a 3-channel digital mixer with industry-leading KLARK TEKNIK Digital Sound Processing (DSP), Class-D amplifier and Spatial Sound technologies, plus convenient Bluetooth stereo audio streaming and iPhone/iPad remote control. This cool-running system delivers amazingly-deep, chest-pounding bass that will keep the party going all night long.
Tiny Subwoofer – Tremendous Sound Designed for maximum portability and low-end support, the iP12B can be used as a standalone subwoofer with your powered full range speakers, or the backbone of a great-sounding speaker system. Setup is fast and easy; just connect your mic or mixer feed, your passive loudspeakers, and power. The iP12B instantly fills the room with the world-famous TURBOSOUND "sound” that has won the coveted Queen’s Award an unprecedented three times.
KLARK TEKNIK – Inspired Technology KLARK TEKNIK is recognized worldwide as one of the most prestigious British audio companies, with a 40-year pedigree and even a TEC Lifetime Achievement Award to back it up. The Company has designed and manufactured products for world-class artists, and their legendary DN780 reverb processor is considered by leading audio engineers around the world as the industry standard. Check out their website to learn more about KLARK TEKNIK’s legendary heritage. TURBOSOUND is proud to incorporate custom-engineered KLARK TEKNIK Class-D amplifier and DSP technologies into their products.
DSP – the Secret to Superb Sound From the instant your signal enters the iP12B, the built-in DSP takes over ensuring the highest possible signal integrity. Much more than just selective EQ enhancement, the 24-bit processor analyses the incoming signal and intelligently applies specific filters to actually improve the sound quality. It’s like having an audio engineer monitoring the input and output signals, dialing in the perfect EQ and constantly making subtle adjustments to the crossover, compressor/limiter, three discrete amplifier channels and more, all of which adds up to significantly better sound. Custom-Engineered Drivers Our speakers are designed specifically for each application – it’s what sets us apart from the competition. When you buy a TURBOSOUND speaker system, you can rest assured that the speakers inside have been engineered to perform flawlessly in conjunction with every other element for truly professional results.
Built-in Digital Mixer – Comprehensive Remote Control The iP12B features a fully addressable onboard digital mixer with two combo jack/XLR connectors that accept balanced and unbalanced connections for dynamic mics and line-level instruments. The simple and intuitive user interface consists of a single rotary push-encoder with Process, Setup, Exit and Enter function buttons. A beautifully-backlit LCD display controls DSP functions including mixer parameters, 3 band EQ and presets. All settings can be controlled locally, or via free downloadable iPhone/iPad apps – and locked down to prevent unauthorised access. You get total control of the iP12B directly from your iPhone or iPad. This amazing feature lets you adjust all settings from either the listening area or the stage, for the perfect sound every time. The dedicated apps are available free of charge at turbosound.com, or from the Apple App Store.
Bluetooth Ready The days of tape decks, CD and even mp3 players are long gone. Now your music lives on your smartphone or computer tablet, so you can stop searching for those outdated cables and fancy adapters. An industry first, the iP12B puts all your music at your fingertips via stereo Bluetooth. Now with a simple wave of your hand, you can stream music from any Bluetooth-equipped iOS device, such as your iPad, iPod touch, iPhone or even your laptop computer.
Stunning Performance – Superb Value The INSPIRE iP12B powered subwoofer stands head and shoulders above the rest of the pack and delivers exceptional performance, even when pushed to the limit. Ultra-lightweight and powerful with a custom-designed 12" long-excursion LF driver, an integrated mixer, stereo Bluetooth streaming, iPhone/iPad remote control, 1,000 Watts of KLARK TEKNIK’s Class-D output power and Digital Sound Processing, the iP12B is ideal for both portable and installed applications.
FEATURES
Speaker configuration Active/passive: Active Type: Subwoofer LF driver: 12“ MF driver: N/A HF driver: N/A Power Amplifier class: D Wattage: 600W, 2 x 200W (satellites) Mixer/preamp: N/A Audio Frequency response: 45hZ - 150Hz +3dB Coverage pattern: N/A Max SPL: 120 dB peak Inputs XLR: 2 XLR/TRS combo TRS: N/A TS: N/A RCA: N/A Output/thru XLR: 2 TRS: N/A TS: N/A SpeakON: 2 Enclosure Cabinet material: 18 mm birch ply Width: 16.5“ Height: 19.1“ Depth: 19.7“ Weight: 49.2 lb.
|
Reviews
There are no reviews yet.