Content |
DVA T12 is a step up the evolutionary ladder from the successful DVA T4 line array system. Although it provides more power and has greater range, its active three-way design makes it just as easy to set up and install as its predecessor. The DVA T12 features state-of-the-art neodymium speakers and high-performance digital amps with total of 1,410W output power. In combination with top-drawer DSP and premium-quality AD-DA transformers, it delivers high-definition sonic images with massive SPL for large sound reinforcement applications. Weighing just 29 kg, this remarkably compact unit belies its unobtrusive look by enabling you to set up very powerful line arrays that deliver extraordinary performance.
• Long-throw system
• Fully powered three-way unit, freely scalable to setups of any size
• Sequentially configurable array segments
• High-end digital controller (DSP) on board
• Network-ready with an integrated RDnet port
• Hardware compatible with DVA T4 systems |
The SR-C8SWP is a 2-way Line Array Speaker featuring wave front control technology which creates a sound field with high sound clarity and uniform sound pressure. Recommended digital processor is the DP-0206 (optional). It can be converted into the bi-amplifier drive system by changing the internal connection.
Enclosure | Bass-reflex type | Power Handling Capacity | Continuous program: 360 W (single-amp mode)
Low: 360 W, High: 180 W (bi-amp mode) | Rated Impedance | 16 Ω (single-amp mode)
Low: 16 Ω, High: 16 Ω (bi-amp mode) | Sensitivity | 98 dB (1 W, 1 m) (single-amp mode)
Low: 95 dB (1 W, 1 m), High: 110 dB (1 W, 1 m) (bi-amp mode) | Frequency Response | 65 - 20,000 Hz (when driven with the optional DP-0206's recommended parameters) | Crossover Frequency | 1,600 Hz (when driven with the optional DP-0206's recommended parameters) | Directivity Angle | Horizontal: 110゜, Vertical: 15゜ | Speaker Component | Low frequency: 20 cm (8) cone-type“
High frequency: Wave front control horn 110゜ (horizontal) × 15゜ (vertical)
+ compression driver × 2 | Connected Cable | Direct cable withdrawal from internal speaker: φ8.6 mm (φ0.34)
,conductor cross section: 1.25 m㎡ (0.05“)
4-core cable, 3 m (9.84 ft) | Water Protection | IPX4 | Finish | Enclosure: Plywood, black, urethane coating
Front grille: Punched stainless steel, black, paint | Dimensions | 526.6 (W) × 293 (H) × 294 (D) mm (20.73 × 11.54" × 11.57“)“ | Weight | 16 kg (35.27 lb) | Accessory | M8 connection bolt …4 | Option | Rigging frame: SR-RF8WP
Digital processor: DP-0206 |
|
The SR-S4LWP is a two-way line array speaker ideal for long distance sound transmission and configures a line array by arranging speaker elements vertically close to each other. It satisfies the water protection requirements set down in the IPX4 Standard. It can be converted into the bi-amplifier drive system by changing the internal connection. It can be used for high-impedance applications with the installation of the optional MT-S0601 Matching Transformer.
Enclosure | Sealed type | Power Handling Capacity | Continuous program: 600 W (single-amp mode)
Low 240 W, High 240 W (bi-amp mode) | Rated Impedance | 8 Ω (single-amp mode)
Low 8 Ω, High 8 Ω (bi-amp mode) | Sensitivity | 94 dB (1 W, 1 m) | Frequency Response | 70 - 20,000 Hz (when using DP-0206 (option)) | Crossover Frequency | 3,500 Hz | Directivity Angle | Horizontal: 90゜, Vertical: 0゜ (within the range of speaker height) | Speaker Component | Low frequency: 10 cm cone-type × 8
High frequency: 2.5 cm balanced dome-type × 24 | Connected Cable | Direct cable withdrawal from internal speaker: φ8.6 mm,
conductor cross section: 1.25 m㎡, 4-core cable, 3 m | Operating Temperature | -10℃ to +50℃ | Water Protection | IPX4 | Finish | Enclosure: Plywood, white, urethane coating
Front grille: Punched stainless steel (SUS304), white, paint | Dimensions | 160 (W) × 895 (H) × 255 (D) mm (excluding connected cable) | Weight | 16 kg | Accessory | Bi-amplifier drive rating label …1, Bi-amplifier drive input indication label …1 | Option | Matching transformer: MT-S0601, Extension plate: SR-EP4WP,
Wall mounting bracket: SR-WB4WP, Wall tilt bracket: SR-TB4WP,
Protection pad: SR-PP4, Digital processor: DP-0206 |
|
The VT4880A Dual 18" Ultra Long Excursion Subwoofer Line Array Element is designed to deliver high fidelity sound reinforcement of sub-low frequencies for a wide variety of live music and A/V support applications. Typical uses include concert audio and multi-media presentations where extended low-frequency performance is desired.
Features : | | Specifications : | - Advanced, Ultra Long Excursion Components: Differential Drive® Neodymium Magnet, Dual Voice Coil, Direct Cooled™ cone transducers
| - Advanced Construction Techniques and PlyMax™ panels provide exceptionally rigid, lightweight enclosure
| - Rugged DuraFlex™ exterior finish; weather-resistant components
| - Integrated Suspension System: premium heat-treated alloys. Hingebars included.
| | |
Frequency Range | : | 25 Hz – 160 Hz (-10 dB) |
| Frequency Response | : | 29 Hz – 120 Hz (±3 dB) |
| Continuous Power Rating | : | 4000W |
| Sensitivity | : | 95dB (1W/1m) |
| Nominal Impedances | : | 2 x 8 ohms |
| Dimensions (W x H x D ) | : | 1229 mm x 493 mm x 860 mm
(48.3" x 19.4" x 33.9“) |
| Weight | : | 83.9 kg (185 lb) | | |
|
The SR-S4S is a two-way line array speaker ideal for short distance sound transmission and configures a line array by arranging speaker elements vertically close to each other. It can be converted into the bi-amplifier drive system by changing the internal connection. It can be used for high-impedance applications with the installation of the optional MT-S0601 Matching Transformer.
Enclosure | Bass-reflex type | Power Handling Capacity | Continuous program: 600 W (single-amp mode)
Low 240 W, High 240 W (bi-amp mode) | Rated Impedance | 8 Ω (single-amp mode)
Low 8 Ω, High 8 Ω (bi-amp mode) | Sensitivity | 93 dB (1 W, 1 m) | Frequency Response | 70 - 20,000 Hz (when using DP-0206 (option)) | Crossover Frequency | 3,500 Hz | Directivity Angle | Horizontal: 90゜, Vertical: 10゜ | Speaker Component | Low frequency: 10 cm cone-type × 8
High frequency: 2.5 cm balanced dome-type × 24 | Input Connector | M5 screw terminal, distance between barriers: 12.2 mm
and Neutrik NL4MP × 2 | Finish | Enclosure: MDF, white, paint
Front grille: Punched steel plate, white, acrylic paint | Dimensions | 160 (W) × 892 (H) × 303 (D) mm | Weight | 16 kg | Accessory | Bi-amplifier drive rating label …1, Bi-amplifier drive input indication label …1 | Option | Matching transformer: MT-S0601, Extension plate: SR-EP4,
Flying bracket: SR-FB4, Wall tilt bracket: SR-TB4,
Stand adapter: SR-SA4, Protection pad: SR-PP4,
Digital processor: DP-0206 |
|
The SR-C8L is a 2-way Line Array Speaker featuring wave front control technology which creates a sound field with high sound clarity and uniform sound pressure. Recommended digital processor is the DP-0206 (optional). It can be converted into the bi-amplifier drive system by changing the internal connection.
Enclosure | Bass-reflex type | Power Handling Capacity | Continuous program: 360 W (single-amp mode)
Low: 360 W, High: 180 W (bi-amp mode) | Rated Impedance | 16 Ω (single-amp mode)
Low: 16 Ω, High: 16 Ω (bi-amp mode) | Sensitivity | 98 dB (1 W, 1 m) (single-amp mode)
Low: 95 dB (1 W, 1 m), High: 110 dB (1 W, 1 m) (bi-amp mode) | Frequency Response | 65 - 20,000 Hz (when driven with the optional DP-0206's recommended parameters) | Crossover Frequency | 1,600 Hz (when driven with the optional DP-0206's recommended parameters) | Directivity Angle | Horizontal: 110゜, Vertical: 5゜ | Speaker Component | Low frequency: 20 cm (8“) cone-type
High frequency: Wave front control horn 110゜ (horizontal) × 5゜ (vertical)
+ compression driver × 2 | Input Connector | M5 screw terminal, distance between barriers: 12.2 mm (0.48“)
and Neutrik NL4MP × 2 | Finish | Enclosure: Plywood, black, urethane paint
Front grille: Punched steel plate, black, paint | Dimensions | 526.6 (W) × 293 (H) × 296 (D) mm (20.73 × 11.54" × 11.65“) | Weight | 17 kg (37.48 lb) | Accessory | M8 connection bolt …4 | Option | Cluster bracket: SR-CL8
Rigging frame: SR-RF8
Tilt joint bracket: SR-TP8
Digital processor: DP-0206 |
|
Reviews
There are no reviews yet.