Content |
Telco module (with internal hybrid) for the D&R Airlab mixing console
The AIRLAB has the possibility to be loaded with up to 16 Telco modules.
Due to an ingenious Mix-Minus system alignment is only necessary during installation.
The AIRLAB Telco module is a straight forward design making communication very easy.
The first control is the front panel accessible, trimmer for side tone adjustment, only necessary during installation.
The Telco Send knob controls the outgoing signal to the caller. This signal is derived from the PROGRAM or SUB bus.
The line input can be switched to a balanced XLR input connector to accept an external (digital) hybrid instead of its own internal hybrid.
A separate input gain control with HP and LP filters be used to enhance intelligibility.
The SUB and PROGRAM assign switch routes the signal to both outputs if needed.
The stereo Aux. control has jumpers that select its source to be pre or post VCA/MUTE.
A Pan-pot and CUE/Select switch plus the ON switch completes the Telco module.
A 100mm linear fader controls a high quality THAT VCA, eliminating any fader wear out in the future.
Connecting a Caller can be accomplished with the ON switch when the fader is up or with the CUE/SELECT/RING switch when the fader is down.
When CUE is active in the TELCO module, the caller is connected to the CUE bus and also the engineers talk-back, but does not go ON-AIR yet as the fader is down.
It is possible to connect both the Cue and On switch to a remote unit, allowing a director to control the broadcast.
A "Connect" LED positioned below the High Cut switch indicates that the internal Hybrid is active.
| 8-Channel AES/EBU I/O Card with REF Video Input
The MY8-AEB is an eight-channel digital input/output card that complies with the AES 3id-1995 standard. It provides video input jacks that allow the host device in which the MY8-AEB is installed to be synchronized to a video signal.
In addition to 8 BNC connectors (4 stereo inputs and 4 stereo outputs) the MY8-AEB has a REF Video input that can be used to receive a PAL or NTSC format Reference video (Black Burst) signal that will provide the synchronization word clock for the device into which the card is installed.
Features
- 24bit resolution, 8-in/8-out AES/EBU interface
- 9x BNC connetors: 4x IN, 4x OUT, 1x Reference video input
- “eXi-Clock" synchronization maintenance function
Specifications
General Specifications |
Channel Count |
8IN / 8OUT / 1REF Video IN |
Format |
AES/EBU (AES-3id) |
Resolution |
24 bit |
Connector |
8 x BNC(4 x AES In, 4 x AES Out)
1 x BNC (Reference Video In with "eXi-Clock" sync capability) |
*“eXi-Clock" is a function that is capable of seamlessly continuing word clock generation even if the Reference video signal is interrupted. | Professional Automation for Multi-microphone Mixing
The Dugan-MY16 is an automatic mixing card for Yamaha digital mixers that employs advanced technology from Dan Dugan Sound Design. When multiple microphone inputs need to be mixed without a script or pre-planned gain changes, the Dugan-MY16 can automatically optimize gain distribution over multiple faders so that the engineer is free to concentrate on the quality of the mix, rather than being chained to the faders. It's almost like having a talented assistant engineer keeping track of fader levels, lightening the overall workload and maximizing efficiency.
Features
- 24bit resolution, 16-in/16-out automatic mixing (8-in/8-out at 96 kHz)
- 2x Optical connectors, 1x RJ-45 connector
- Up to 8 cards can be used simultaneously to handle up to 128 channels at 48 kHz, or 64 channels at 96 kHz
- Automatic detection of active mics with automatic control of individual channel and overall gain
- No speech cutoff due to late fader activation, for smooth, uninterrupted sound
- Effective background noise and feedback suppression without the need for noise-gate type threshold level settings
- Easy setup: simply insert on the appropriate mixer input channels and raise the faders
- Channels can be grouped to make up to three independent automatic mixers
- Dugan Control Panel software application provides remote control and level monitoring capability
- Can also function as an 8-channel auto-mixer + 8-channel ADAT interface
Specifications
General Specifications |
Operating Modes |
Standard: 16 channels of Dugan mixing at 44.1 or 48kHz, ADAT connectors link multiple Dugan units
High-rate: 8 channels of Dugan mixing at 88.2 or 96kHz sample rate, ADAT connectors link multiple Dugan units
Shared: 8 channels of Dugan mixing and 8 channels of general purpose ADAT I/O |
Digital I/O |
ADAT optical, 24 bit, 44.2/48kHz (Shared mode only) |
Gain |
Unity |
Audio Latency |
0.2ms |
Optical Linking |
Up to 8 units may be linked in a ring; links with Models D-2, D-3 , E, E-1 and Dugan-MY16 |
Connectors |
10/100 BASE T: RJ-45
Linking and Digital I/O: ADAT optical |
Recommended
Yamaha Mixers |
CL5/3/1, PM5D/-RH, DSP5D, M7CL-48ES/-48/-32, LS9-32/-16, DM2000, DM1000, 02R96, 01V96/96i, DME64N/24N |
Dimensions |
H=4.0cm (1.57“)
W=12cm (4.72“)
D=17.6cm (6.91“) |
Weight |
160g (5.6oz)
0.6kg (1lb 5oz) in shipping box |
| Suitable for use with many Soundcraft mixing consoles including:
200SR (24ch), 200B (24ch), 200BVE (8ch), 200 Delta (24ch), Delta AVE (8ch)
DC power connector: 5 pin screw-lock
3 Output rails: +17V, -17V, +48V
Power requirements: 110/120/220/240VAC ±10% 50/60Hz
Input power: 100VA
Dimensions: 483(w) x 195(d) x 89(h)mm
Physical: standard 19" (2u) rack mount kit included
Weight: 5kg | 4-Channel Analog Input Card
Mini-YGDAI cards make it easy to add I/O in a wide variety of audio and network formats to Yamaha digital mixing consoles, processors, and power amps that are equipped with compatible card slots. Mini-YGDAI cards can give your system the most up-to-date capabilities for any application.
Features
- 24bit resolution, 4-in analog audio interface
- 4x XLR3-31 connectors (balanced)
- Max input level before clip: +24dBu (default) / +18dBu / +4dBV
Specifications
General Specifications |
Channel Count |
4IN |
Format |
Analog |
Max input level |
+24dBu(default) / +18dBu / +4dBV
*GAIN switches at each input port |
Sampling frequency |
44.1/48 kHz |
Resolution |
24 bit |
Connector |
4x XLR-3-31 type connectors (balanced) |
| 96kHz Compatible 8-Channel Analog Output Card
Mini-YGDAI cards make it easy to add I/O in a wide variety of audio and network formats to Yamaha digital mixing consoles, processors, and power amps that are equipped with compatible card slots. Mini-YGDAI cards can give your system the most up-to-date capabilities for any application.
Features
- 24bit resolution, 96kHz compatible 8-out analog audio interface
- 1x D-sub 25 pin connector (balanced)
- Max output level before clip: +18dBu
Specifications
General Specifications |
Channel Count |
96kHz compatible 8OUT |
Format |
Analog |
Max output level |
+18dBu |
Sampling frequency |
96kHz |
Resolution |
24 bit |
Connector |
1x D-sub 25pin connector |
|
Reviews
There are no reviews yet.