B&W CM – 9 S2 Theatre Speaker System 5.1

For the full cinema-like experience, the ultimate T Series system has the best of everything: T301s all round, supported by the same discreet high performance subwoofer. However big your living area, it envelopes you in an expansive, richly textured sound picture that brings a movie to life as youʼve never experienced before.

    T301 / T301c
Design     Two and a half-way closed box
Drive units     2 x 115mm (4.5in.) dual layer MF
25mm (1in.) aluminium HF
Frequency response     80Hz - 30kHz
Crossover frequency     1.7kHz
Amplifier requirements     10 - 150 W
Sensitivity (2.83V/1m)     91dB (wall mount)
88dB (floor stand mount)
Maximum output (SPL)     110dB
Impedance     8Ω
Internal volume     1.4 Litres
Weight     1.5kg (3.3lbs)
Dimensions
(H x W x D)     600* x 140 x 35 mm
(23.6 x 5.5 x 1.4 in.)
Dimensions
(H x W x D)
centre mode     140 x 600 x 35 mm
(5.5 x 23.6 x 1.4 in.)
Finish     Black
* Height of satellites will increase by 30mm when using supplied desk stand
Not all models / finishes are available in all markets. Contact your local dealer for specific range details.


      T-2
Design     Closed box powered subwoofer
Drive units     1 x 250mm (10in.)
Frequency response     30Hz - 250Hz
Amplifier     250 Watts built-in Class-D
Maximum output (SPL)     110dB
Low pass filter variable     Fixed 250Hz, 2nd-order
Low level signal inputs     RCA phono socket
Internal volume     12.7 Litres
Power requirements     100 - 240 V ac ~ 50/60Hz
Power consumption     250VA
Weight     13kg (28.6lbs)
Dimensions
(H x W x D)     380 x 370 x 177 mm
(15.0 x 14.6 x 7.0 in.)
Finish     Black
Not all models / finishes are available in all markets.
Contact your local dealer for specific range details.

Driver Complements
Satellites
Mid/Woofer     1 - 3 1/4" Diameter (8.26cm)
Dynamic Balance aerated polypropylene cone with Extended Linear Motion voice coil driver
Tweeter     1 - 3/4" Diameter (1.91cm)
Dynamic Balance ring radiator tweeter
Center
Tweeter     1 - 3/4" Diameter (1.91cm)
Dynamic Balance composite ring radiator tweeter
Electrical
Overall Frequency
Response     85HZ - 31kHz
Lower -3dB Limit     110Hz
Upper -3dB Limit     28kHz
Nominal Impedance     8 ohms
Recommended Amplifier Power     10-125 w/channel
Efficiency     90 dB
Inputs     Gold-plated 5-way binding posts
Dimensions
Satellites
Cabinet Size     7 3/4" H x 4 1/2" W x 5 15/16" D
(19.68cm H x 11.43cm W x 15.08cm D)
Mounting Options     Included wall mount bracket; 1/4x20 threated insert
Enclosure Type     Steel-plate reinforced curved enclosure with PowerPort bass venting
Center
Cabinet Size     4 5/16" H x 16 11/16" W x 3 15/16" D
(10.95cm H x 42.39cm W x 10.00cm D)
Weight     4.70 lbs. (2.13kgs)
Mounting Options     keyhole slots; .25 x 20 threaded inserts
Enclosure Type     Steel-plate reinforced curved enclosure with PowerPort Bass venting
Shipping/Other
Total Shipping Weight     20.30 lbs. (9.21kgs)
Speaker Warranty     5 years parts and labor (original purchaser)
Accessories
(comes with)    Satellite wall mount bracket

Frequency Response: C: 55 Hz - 35 KHz
L/R: 85Hz - 35KHz
Sensitivity (1W@1m): C: 90 dB
L/R: 87dB
Nominal Impedance: C: 8 Ohms
L/R: 8 Ohms
Power Handling Single (RMS): C: 100 W
L/R: 60 W
System Power Handling (RMS): C: 150 W
L/R: 100 W
Recommended Amplifier Requirements: C: 20 - 150 W
L/R: 10 - 100 W
Maximum SPL (dBA): 108
Bass Alignment: C: Bass reflex - front ported
L/R: Bass reflex - ported to the underside
Drive Unit Complement: 4 x 100mm (4“) MMP®II cone bass/mid driver.
3 x 25mm (1“) C-CAM® gold dome tweeter
External Dimensions
(H x W x D): mm (inches) 125 x 985 x 105 mm
(4 15/16 x 38 5/8 x 4 1/8)
Weight (each):
Kg (lbs) 8 (17 5/8)

User's Manual

# The perfect speaker solution when you want big, high definition sound from compact, easy-to-use speakers
# Only 2-1/2 inches (6.4cm) deep for unobtrusive high performance
# Perfect appearance and timbre match for Mythos XTR series front speakers
# Bipolar driver array disperses surround sound over a wide area for enveloping effects
# Two high-definition XTDD 3-1/2 inch mid/bass drivers for life-like clarity
# Wall mount bracket and vertical table support stand included

Dimensions (mounted on wall without bracket) :11-7/8" H x 6" W x 2-1/2" D | 30.1cm H x 15.2cm W x 6.4cm D
Dimensions (mounted on wall with bracket) :11-7/8" H x 6" W x 2-9/16" D | 30.1cm H x 15.2cm W x 6.5cm D
Driver complement :2 each 3-1/2" (90mm) XTDD anodized Aluminum dome mid/bass drivers in a bipolar array, 1 each 1" (25mm) Pure Aluminum Dome Tweeter
Frequency response (overall on wall) :100Hz - 30kHz
Sensitivity :90dB
Impedance :8 Ohms nominal
Recommended amplifier power :20 - 100 Watts per channel
Enclosure :Extruded Aluminum, sealed
Product weight (without table stand) :
Supplied accessories :Wall mount bracket, adjustable support foot for vertical shelf placement, magnetic logos
Packaging :One to a carton
Available finishes :High gloss black

Dimensions | (Metric) :23-1/2" W x 6-3/4" H x 14-1/16" D | 59.7 x 17.1 x 35.7 cm
Driver Complement :One cast basket 8" subwoofer; Two cast basket 5-1/4" upper-bass/midrange drivers; One 1" pure aluminum dome tweeter
Frequency Response :20 Hz - 30 kHz
Impedance :Compatible with 8 Ohm outputs
Sensitivity :91 dB
Recommended Associated Amplifier Power :20 - 300 watts
A/V Receiver Crossover Setting :Large; Full Bandwidth
Accessories :Feet (3)
Packaging :One to a carton
Internal Amplifier Power :150 watts
Auto On / Off :Signal Sensing (US) | Signal Sensing and Switched (International)
Power Requirements :110 volts Alternating Current (US) | 220 volts (International)
Fuse :
Available Finishes :Piano-Gloss Black
Warranty :5 Years; 3 Years for Amplifiers
Inputs :Three sets of five way binding posts: Triwireable; One full range low level RCA
Weight | (Metric) :37 lbs | 16.8 kg