THORENS TD 309 Tri-Balance Turntable (Red hg)

NEW STANDARDS IN ANALOGUE REPLAY.

The TD 309 sets new standards in analogue replay. The turntable\'s innovative three-point-suspension (Tri-Balance) ensures perfect balance in both mechanical and aesthetic terms. Form and function work in harmony to make the TD 309 a turntable that is guaranteed to reveal the magic of analogue replay.

The TP 92 tonearm, which was specially designed for Thorens turntables, uses an ultra-low-friction bearing and an innovative magnetic anti-bias system with zero stiction. The arm tube is made from rolled aluminium that is damped using RMR (Reduced Modal Resonance) technology. The brass counterweight at the end of the arm tube is double-decoupled, and the tonearm is so designed that its centre of gravity is level with the stylus.

• New innovative Tri-Balance suspended sub chassis turntable
• New suspension system to make setting up easy
• Low Noise, Low Voltage electronically speed controlled DC Motor
• Adjustable belt tension for best performance
• Aluminium sub platter with single line contact
• Fused silica platter for consistency and sound quality
• New low resonance TP 92 arm with precision Japanese bearings
• Arm adjustable for azimuth and overhang

Available option:

Dust Cover for TD 309 (clear acrylic).

Specs:

• Operation manual
• Drive System belt-drive (flat belt around sub-platter)
• Motor servo-controlled DC motor
• Speeds 33-1/3, 45 rpm
• Speed Change Electronic
• Platter 12” / 2.3 kg (glass)
• Tonearm THORENS
• Pick-up Cartridge AT-95 B
• Anti-skating (Bias) by magnet
• Automatic Shut-off none
• Power Supply external plug-in power supply, output: DC 12 V
• consumption when off: 0.5 W max.
• Dimensions 470 x 125 x 430 mm (W x H x D)
• Weight 6.5 kg
• Scope of Delivery power supply, RCA interconnects, operating instructions

Pro-Ject has decided to go after the cheap plastic turntable market with an high quality alternative that comes complete with an Ortofon cartridge. The new Elemental table is a real "plug'n'play" all the way. No adjustment of counterweight and antiskating is needed, because both are pre-adjusted. This new straight ultra low mass tonearm is optimised for Ortofon OM cartridge series. All the buyer needs to do is remove it from the box, remove bearing guard, locate the belt around the platter, remove stylus guard and plug it in.  

The only plastic here is the stylus guard. The hidden secret to the new table's sonic success, is a central gravity mass point, made from artificial stone and placed directly underneath the platter bearing. It is capable to fully absorb unwanted rumble and motor vibration. This turntable appears to be pure simplicity itself, while maintaining high quality audio standards.

The hidden secret to the new table's sonic success, is a central gravity mass point, made from artificial stone and placed directly underneath the platter bearing. It is capable to fully absorb unwanted rumble and motor vibration. This turntable appears to be pure simplicity itself, while maintaining high quality audio standards. 

•  Belt drive system with low vibration DC motor  

•  Central gravity mass point made from artificial stone  

•  Main platter bearing made from stainless steel runs in bronze bushing with Teflon bottom  

•  Low resonance MDF platter with felt mat  

•  8,6” ultra low mass tonearm with straight arm tube  

•  Pre-adjusted tracking force & antiskating  

•  Gold-plated RCA contacts & cartridge pins  

•  Colour options: red-black, white-black, silver-black 

Specifications:

• speed : 33, 45 (manual speed change)

• Speed variance: 33: 0,2% 45: 0,18%

• Wow & flutter: 33: 0,14% 45: 0,13%

• platter: 300mm MDF

• tonearm: 8,6” metal tube

• effective arm length: 218,5 mm

• overhang: 22,0 mm

• effective tonearmmass: 8,0gr

• counterweight for cartridge mass: 3 - 5,5g (included)

• tracking force range: 0 - 30mn (OM5 18mn pre-adjusted)

• output: RCA to phono input

• included accessory: RCA cable, 15V DC power supply

• power consumption: 4,0 watts

• dimensions: 430 x 90 x 300mm (WxHxD)

• weight: 2,7 kg net

Best buy turntable with maximum simplicity, outstanding sound quality & USB recording capability!

Pro-Ject has decided to go after the cheap plastic turntable market with an high quality alternative that comes complete with an Ortofon cartridge. The new Elemental Phono USB table is a real "plug'n'play" all the way. No adjustment of counterweight and antiskating is needed, because both are pre-adjusted. This new straight tonearm is optimised for Ortofon OM cartridge series. All the buyer needs to do is remove it from the box, remove bearing guard, locate the belt around the platter, remove stylus guard and plug it into hifi system and computer.

The only plastic here is the stylus guard!

The hidden secret to the new table's sonic success, is a central gravity mass point, made from artificial stone and placed directly underneath the platter bearing. It is capable to fully absorb unwanted rumble and motor vibration. This turntable appears to be pure simplicity itself, while maintaining high quality audio standards and vinyl recording capability.

• Belt drive system
• Integrated motor control with DC power supply secures silent running
• Central gravity mass point made from artificial stone
• Main platter bearing made from stainless steel runs in bronze bushing with Teflon bottom
• Low resonance MDF platter with felt mat
• 8,6” ultra low mass tonearm with straight arm tube
• Pre-adjusted tracking force & antiskating
• Gold-plated RCA contacts & cartridge pins
• Integrated phono stage with precise RIAA equalisation
• Line level output
• A/D converter for vinyl recording with USB B output

• Colour options: red-black, white-black, silver-black

A quiet-running synchronous motor with silicone belt is driving a low-resonance platter made from MDF. A new motor control with DC power supply minimzes unwanted vibration effectively. The main platter bearing consists of stainless steelspindle and bronze bushing with Teflon bottom to seccure low friction.  

The main chassis is made from lightweight, but very stiff particle board. Essential II utilises a straight 8,6" aluminium tonearm design made from a single piece of aluminium with sapphire bearings, which offers a far better „plug & play" solution, than itʽs predecessor. Special feet effectively decouples the turntable from the surface.

Specifications:

• speed : 33, 45 (manual speed change)

• principle : belt drive

• Speed variance : 33: 0,14% 45: 0,25%

• Wow & flutter : 0,12%

• platter : 300mm MDF with felt mat (0,8kg)

• main bearing : stainless steel

• tonearm : 8,6” aluminium

• effective : arm length 218,5 mm

• overhang : 22,0mm

• effective tonearmmass : 8,0gr

• counterweight for mass : 3 - 5,5g (included)

• tracking force range : 0 - 25mn (OM5 18mn recommended)

• included accessory : power supply, dust cover

• Power consumption : 4,5 watts

• dimensions : 420 x 112 x 330mm (WxHxD)

• weight : 4,0 kg net

A quiet-running synchronous motor with silicone belt is driving a low-resonance platter made from MDF. A new motor control with DC power supply minimzes unwanted vibration effectively. The main platter bearing consists of stainless steelspindle and bronze bushing with Teflon bottom to seccure low friction.  

The main chassis is made from lightweight, but very stiff particle board. Essential II utilises a straight 8,6" aluminium tonearm design made from a single piece of aluminium with sapphire bearings, which offers a far better „plug & play" solution, than itʽs predecessor. Special feet effectively decouples the turntable from the surface.

Specifications:

• speed : 33, 45 (manual speed change)

• principle : belt drive

• Speed variance : 33: 0,14% 45: 0,25%

• Wow & flutter : 0,12%

• platter : 300mm MDF with felt mat (0,8kg)

• main bearing : stainless steel

• tonearm : 8,6” aluminium

• effective : arm length 218,5 mm

• overhang : 22,0mm

• effective tonearmmass : 8,0gr

• counterweight for mass : 3 - 5,5g (included)

• tracking force range : 0 - 25mn (OM5 18mn recommended)

• included accessory : power supply, dust cover

• Power consumption : 4,5 watts

• dimensions : 420 x 112 x 330mm (WxHxD)

• weight : 4,0 kg net

A quiet-running synchronous motor with silicone belt is driving a low-resonance platter made from MDF. A new motor control with DC power supply minimzes unwanted vibration effectively. The main platter bearing consists of stainless steelspindle and bronze bushing with Teflon bottom to seccure low friction.  

The main chassis is made from lightweight, but very stiff particle board. Essential II utilises a straight 8,6" aluminium tonearm design made from a single piece of aluminium with sapphire bearings, which offers a far better „plug & play" solution, than itʽs predecessor. Special feet effectively decouples the turntable from the surface.

Specifications:

• speed : 33, 45 (manual speed change)

• principle : belt drive

• Speed variance : 33: 0,14% 45: 0,25%

• Wow & flutter : 0,12%

• platter : 300mm MDF with felt mat (0,8kg)

• main bearing : stainless steel

• tonearm : 8,6” aluminium

• effective : arm length 218,5 mm

• overhang : 22,0mm

• effective tonearmmass : 8,0gr

• counterweight for mass : 3 - 5,5g (included)

• tracking force range : 0 - 25mn (OM5 18mn recommended)

• included accessory : power supply, dust cover

• Power consumption : 4,5 watts

• dimensions : 420 x 112 x 330mm (WxHxD)

• weight : 4,0 kg net