THORENS TD 201 Belt drive Turntable (Black hg)

565.00 incl. GR VAT

In stock

EAN: N/A
Installments calculation
CompareAdd to wishlist Submit Better Price
Availability: Available in 1-3 d. Available in 1-3 d. SKU: TD 201 BLACK HG Category:
The new Thorens TD 201 is the right choice for anyone looking for a robust, easy to use plug and play turntable. It comes with a smooth running belt drive and a aluminium platter with rubber mat. The new Thorens TP 71 tonearm uses a detachable headshell with preconfigured AT 3600 cartridge. SPECIAL FEATURES Using […]

 

Read more

The new Thorens TD 201 is the right choice for anyone looking for a robust, easy to use plug and play turntable. It comes with a smooth running belt drive and a aluminium platter with rubber mat. The new Thorens TP 71 tonearm uses a detachable headshell with preconfigured AT 3600 cartridge.

SPECIAL FEATURES

Using the switchable integrated phono stage the TD 201 can be connected to any amplifier or receiver even if it does not have a specific input for phono devices.

TD 201 Specification

Turntable section

Drive System Belt Drive

Motor DC Motor

Speed 33 1/3 RPM, 45 RPM

Rotation Speed Variation +/–2%

Wow and Flutter 0.2%

Signal-to-Noise Ratio 67dB or higher (A-weighted, 20kHz LPF) 60dB or higher (unweighted, 20kHz LPF)

Platter Aluminum Die-cast Diameter of Platter 12“, 300mm

Tonearm section Alumi tube

Type Static Balance, Straight

Effective Arm Length 8.8“, 223.6mm

Stylus Pressure Range 0 to 4g

Supported Cartridge Weight 3.5 to 6.0g

Overhang 18.6mm

Anti-skating Adjustment Supported

Cartridge section

Type MM type (Audio-Technica AT3600)

Stylus Construction Bonded Diamond

Frequency Response 20Hz to 20kHz

Channel Separation >18dB Channel Balance 2.5dB

Vertical Tracking Angle 20 degrees

Supported Load Impedance 47k ohms

Output Voltage 2.5mV (1kHz, 3.54cm/sec.)

Stylus Pressure 3.5g +/–0.5g

Cartridge Weight 5g +/–0.5g

Head-shell Weight 10g (including Screws, Nuts and Wires)

Analog Output

Connector RCA Pin jack (Gold-plated)

Power AC 100 to 240V, 50/60Hz Power Consumption 1.5W (less than 0.5W at Standby)

Overall Dimensions (W x H x D) 420 x 355x 121mm

Weight Approx. 3.9 kg

Weight 4.00 kg

Reviews

There are no reviews yet.

Be the first to review “THORENS TD 201 Belt drive Turntable (Black hg)”

Your email address will not be published. Required fields are marked *

Quick Comparison

THORENS TD 201 Belt drive Turntable (Black hg) removeJB Systems Q3-USB DJ TURNTABLE 33, 45, 78 rpm removePro-Ject Elemental Phono USB + OM 5e Turntable Silver-Black removeDUAL CS 460 WALNUT SILVER TURNTABLE 33-45-78 RPM removeTHORENS TD 240-2 Belt drive Turntable 78rpm (Walnut) removePro-Ject Essential II with phono USB Turntable Black remove
NameTHORENS TD 201 Belt drive Turntable (Black hg) removeJB Systems Q3-USB DJ TURNTABLE 33, 45, 78 rpm removePro-Ject Elemental Phono USB + OM 5e Turntable Silver-Black removeDUAL CS 460 WALNUT SILVER TURNTABLE 33-45-78 RPM removeTHORENS TD 240-2 Belt drive Turntable 78rpm (Walnut) removePro-Ject Essential II with phono USB Turntable Black remove
Image
SKUTD 201 BLACK HG120011ELEMENTALUSBSBCS 460TD 240-2 WalnutESIIUSBB
Rating
Price565.00 incl. GR VAT279.00 incl. GR VAT335.00 incl. GR VAT 749.00 incl. GR VAT910.00 incl. GR VAT 384.39 incl. GR VAT
Stock

In stock

Available on backorder

Only 1 left in stock (can be backordered)

Available on backorder

Available on backorder

Only 1 left in stock

AvailabilityIn stockAvailable on backorderOnly 1 left in stock (can be backordered)Available on backorderAvailable on backorderOnly 1 left in stock
Add to cart

Add to cart

Add to cart

Add to cart

Add to cart

Add to cart

Add to cart

Description
ContentThe new Thorens TD 201 is the right choice for anyone looking for a robust, easy to use plug and play turntable. It comes with a smooth running belt drive and a aluminium platter with rubber mat. The new Thorens TP 71 tonearm uses a detachable headshell with preconfigured AT 3600 cartridge. SPECIAL FEATURES Using the switchable integrated phono stage the TD 201 can be connected to any amplifier or receiver even if it does not have a specific input for phono devices. TD 201 Specification Turntable section Drive System Belt Drive Motor DC Motor Speed 33 1/3 RPM, 45 RPM Rotation Speed Variation +/–2% Wow and Flutter 0.2% Signal-to-Noise Ratio 67dB or higher (A-weighted, 20kHz LPF) 60dB or higher (unweighted, 20kHz LPF) Platter Aluminum Die-cast Diameter of Platter 12“, 300mm Tonearm section Alumi tube Type Static Balance, Straight Effective Arm Length 8.8“, 223.6mm Stylus Pressure Range 0 to 4g Supported Cartridge Weight 3.5 to 6.0g Overhang 18.6mm Anti-skating Adjustment Supported Cartridge section Type MM type (Audio-Technica AT3600) Stylus Construction Bonded Diamond Frequency Response 20Hz to 20kHz Channel Separation >18dB Channel Balance 2.5dB Vertical Tracking Angle 20 degrees Supported Load Impedance 47k ohms Output Voltage 2.5mV (1kHz, 3.54cm/sec.) Stylus Pressure 3.5g +/–0.5g Cartridge Weight 5g +/–0.5g Head-shell Weight 10g (including Screws, Nuts and Wires) Analog Output Connector RCA Pin jack (Gold-plated) Power AC 100 to 240V, 50/60Hz Power Consumption 1.5W (less than 0.5W at Standby) Overall Dimensions (W x H x D) 420 x 355x 121mm Weight Approx. 3.9 kg

JB Systems Q3-USB features: 

  • high torque direct drive motor 
  • fast start / stop 
  • 3 speeds: 33, 45, 78 rpm with quartz lock 
  • 2 pitch adjustment ranges: +/-10% ; +/-20% 
  • forward / reverse play 
  • starting torque: More than 1.6kgf / cm 
  • starting time: less than 1 second 
  • braking time: less than 1 second 
  • tracking error angle: less than 3° 
  • USB-output for direct recording to any PC 
  • free, multilingual Audacity software available via download: 
  • endless possibilities with free downloadable effect plug-ins 
  • import, export and edit Ogg Vorbis, MP3, AIFF and WAV sound files. 
  • cut, copy, splice, and mix sounds together. 
  • change the speed or pitch of a recording. 
  • remove static, hiss, hum, or other constant background noises. 
  • alter frequencies with Equalization, FFT Filter, and Bass Boost effects. 
  • adjust volumes with Compressor, Amplify, and Normalize effects. 
  • selectable phono/line output 
  • all functions are equipped with stylish, blue LED lights 
  • plastic dust cover 
  • retractable target light 
  • Audio Technica cartridge included 
  • all metal S-shaped tone arm assembly with: counterweight, anti-skating adjustment, lever lift with 
  • height adjustment 
  • adjustable large feet for perfect leveling 
  • phono output: 1,5~3,6mV 
  • line-output: 90~216mV 
  • PC interface: USB 1.1 compatible (Win XP/Vista/Win7 or Mac OS X) 
  • power supply: 230V 
  • power consumption: 11 watt 
  • dimensions: 450 x 352 x 157 mm 
  • weight: 10,5 kg

Best buy turntable with maximum simplicity, outstanding sound quality & USB recording capability!

Pro-Ject has decided to go after the cheap plastic turntable market with an high quality alternative that comes complete with an Ortofon cartridge. The new Elemental Phono USB table is a real "plug'n'play" all the way. No adjustment of counterweight and antiskating is needed, because both are pre-adjusted. This new straight tonearm is optimised for Ortofon OM cartridge series. All the buyer needs to do is remove it from the box, remove bearing guard, locate the belt around the platter, remove stylus guard and plug it into hifi system and computer.

The only plastic here is the stylus guard!

The hidden secret to the new table's sonic success, is a central gravity mass point, made from artificial stone and placed directly underneath the platter bearing. It is capable to fully absorb unwanted rumble and motor vibration. This turntable appears to be pure simplicity itself, while maintaining high quality audio standards and vinyl recording capability.

• Belt drive system
• Integrated motor control with DC power supply secures silent running
• Central gravity mass point made from artificial stone
• Main platter bearing made from stainless steel runs in bronze bushing with Teflon bottom
• Low resonance MDF platter with felt mat
• 8,6” ultra low mass tonearm with straight arm tube
• Pre-adjusted tracking force & antiskating
• Gold-plated RCA contacts & cartridge pins
• Integrated phono stage with precise RIAA equalisation
• Line level output
• A/D converter for vinyl recording with USB B output

• Colour options: red-black, white-black, silver-black

Fully automatic turntable for sophisticated demands with solid Makassar ebony console in luxurious equipment. Tonearm technology: Gimbal tonearm with mass-free contact force adjustment thanks to a high-precision torsion spring. Removable, torsion-resistant carbon fibre tonearm head with 13mm (1/2 inch) attachment. Adjustable contact force and anti-skate. Chassis technology: solid Makassar ebony console, floating subchassis, heavy sandwich platter with additional damping ring for maximum sound enjoyment.
  • Drive technology: belt drive with polished flat belt
  • DC motor with electric Speed control
  • Viscosity damped tonearm lift
  • Automatic tone arm attachment
  • End shut-off with tone arm recirculation.
  • Playback option for 78 rpm archive records.
Functions
Frequency Response
20 Hz - 22kHz
Power
Power Supply
2 V DC, 150 mA
Dimensions
Weight
6,6 kg

High-quality materials, a classic design and love for details are the distinctive characteristics of this fully automatic record player. The massive and stable real wood plinth, which is available also with piano lacquer finish, provides the TD 240-2 with a timeless elegance.

This record player has been equipped with the new TP 19-1 tonearm and an extremely silent running precision belt drive beneath the platter, so that the other technical qualities are also most evident. Set-up and connections are effortlessly carried out so that the TD 240 is ready to play within minutes

Specs:

  • Operation fully automatic
  • Drive System internal flat drive belt
  • Motor electronically controlled DC motor
  • Speeds 33-1/3, 45, 78 rpm
  • Speed Select electronically
  • Platter 12” / 0.7 kg (aluminium, non-magnetic)
  • Tonearm THORENS® TP 19-1
  • Pick-up Cartridge THORENS® TAS 267
  • Anti-skating (Bias) by spring (adjustable)
  • Automatic Shut-off mechanically
  • Cable Capacitance 160 pF
  • Power Supply external mains adaptor (115-230 V / 50-60 Hz depending on type)
  • Dimensions 430 x 130 x 365 mm (W x H x D)
  • Weight 6.4 kg
  • Finish solid wooden plinth with black piano laquer, black structured enamel,
  • Scope of Delivery mains adapter, dust cover (acrylic), RCA interconnects, operating instructions

A quiet-running synchronous motor with silicone belt is driving a low-resonance platter made from MDF. A new motor control with DC power supply minimzes unwanted vibration effectively. The main platter bearing consists of stainless steelspindle and bronze bushing with Teflon bottom to seccure low friction.  

The main chassis is made from lightweight, but very stiff particle board. Essential II utilises a straight 8,6" aluminium tonearm design made from a single piece of aluminium with sapphire bearings, which offers a far better „plug & play" solution, than itʽs predecessor. Special feet effectively decouples the turntable from the surface.

Specifications:

  • speed : 33, 45 (manual speed change)

  • principle : belt drive

  • Speed variance : 33: 0,14% 45: 0,25%

  • Wow & flutter : 0,12%

  • platter : 300mm MDF with felt mat (0,8kg)

  • main bearing : stainless steel

  • tonearm : 8,6” aluminium

  • effective : arm length 218,5 mm

  • overhang : 22,0mm

  • effective tonearmmass : 8,0gr

  • counterweight for mass : 3 - 5,5g (included)

  • tracking force range : 0 - 25mn (OM5 18mn recommended)

  • included accessory : power supply, dust cover

  • Power consumption : 4,5 watts

  • dimensions : 420 x 112 x 330mm (WxHxD)

  • weight : 4,0 kg net

Weight4.00 kg10.50 kg3.50 kg9.50 kg8.50 kg5.00 kg
DimensionsN/AN/AN/AN/AN/AN/A
Additional information
Weight 4.00 kg
Weight 10.50 kg
Weight 3.50 kg
Weight 9.50 kg
Weight 8.50 kg
Weight 5.00 kg