THORENS TD 202 Belt drive Turntable (Black hg)

Thorens TD 202 Turnable Compared with its "smaller” brother TD 201 it comes with a more massive plinth and a AT 95E cartridge. 

New TD 202 completes the new series of manual plug and play turntables. Compared with its "smaller” brother TD 201 it comes with a more massive plinth and a AT 95E cartridge. 

The integrated phono stage includes an additional analogue/digital converter with USB out. So the record played will be automatically digitized and can easily be recorded on a computer using several kinds of recording software that can be downloaded from the web.

TD 202 Specification

Turntable section 

Drive System Belt Drive

Motor DC

Motor Speed 33 1/3 RPM, 45 RPM

Rotation Speed Variation +/–2%

Wow and Flutter 0.2%

Signal-to-Noise Ratio 67dB or higher (A-weighted, 20kHz LPF) 60dB or higher (unweighted, 20kHz LPF)

Platter Aluminum Die-cast Diameter of Platter 12“, 300mm

Tonearm section 

Alumi tube

Type Static Balance, Straight

Effective Arm Length 8.8“, 223.6mm

Stylus Pressure Range 0 to 4g

Supported Cartridge Weight 3.5 to 6.0g

Overhang 18.6mm

Anti-skating Adjustment Supported

Cartridge section 

Type MM type (Audio-Technica AT-95E)

Stylus Construction Bonded Diamond

Frequency Response 20Hz to 20kHz

Channel Separation >18dB

Channel Balance 2.5dB

Vertical Tracking Angle 20 degrees

Supported Load Impedance 47k ohms

Output Voltage 2.5mV (1kHz, 3.54cm/sec.)

Stylus Pressure 2.0g +/–0.5g

Cartridge Weight 5.7g +/–0.5g Head-shell

Weight 11g (including Screws, Nuts and Wires) 

Analog Output 

Connector RCA Pin jack (Gold-plated) Power AC 100 to 240V, 50/60Hz Power Consumption 1.5W (less than 0.5W at Standby)

Overall Dimensions (W x H x D) 420 x 355x 121mm

Weight Approx. 3.9 kg

The first Debut turntable, introduced in the late 1990s, was a revolution for the hi-fi industry. For the first time after the arrival of Compact Disc and the assumed demise of vinyl records, an analogue product re-emerged in the "mass market” – something all music lovers could afford.  

The new DEBUT Carbon DC has been designed to set new standards in this category for the coming decade – perfectly timed as analogue today is again a respected source, while the demand for good turntables is growing again!  

The most obvious improvement is the inclusion of a CARBON TUBE for the tonearm, which increases stiffness and decreases unwanted resonance.  

This material normally is extensively used in high-end tonearms, but – because of cost reasons – was never used in products at lower price levels. Together with other improvements like an increase in platter size and weight to realize even smoother rotation, the overall sound quality is greatly improved. The approved belt drive design offers low noise AC motor with effective motor decoupling (utilising TPE-damping) and ultra precision frequency DC-driven AC generator (like Speed Box) for ultimate speed stability without unwanted vibration.  

The DEBUT CARBON DC will be offered in high-gloss black or shiny red, green, blue, yellow, silver or white as no-added-cost option.

Specifications:

•  8,6” carbon tonearm  

•  Increased platter size with more weight  

•  Precision belt drive with synchronous motor  

•  New DC power supply with ultra precision frequency DC-driven AC generator (like Speed Box) for ultimate speed stability.  

•  New TPE motor suspension  

•  Felt mat  

•  magnetic cartridge options from Ortofon OM 10 or 2M red  

•  7 high-gloss colours

A quiet-running synchronous motor with silicone belt is driving a low-resonance platter made from MDF. A new motor control with DC power supply minimzes unwanted vibration effectively. The main platter bearing consists of stainless steelspindle and bronze bushing with Teflon bottom to seccure low friction.  

The main chassis is made from lightweight, but very stiff particle board. Essential II utilises a straight 8,6" aluminium tonearm design made from a single piece of aluminium with sapphire bearings, which offers a far better „plug & play" solution, than itʽs predecessor. Special feet effectively decouples the turntable from the surface.

Specifications:

• speed : 33, 45 (manual speed change)

• principle : belt drive

• Speed variance : 33: 0,14% 45: 0,25%

• Wow & flutter : 0,12%

• platter : 300mm MDF with felt mat (0,8kg)

• main bearing : stainless steel

• tonearm : 8,6” aluminium

• effective : arm length 218,5 mm

• overhang : 22,0mm

• effective tonearmmass : 8,0gr

• counterweight for mass : 3 - 5,5g (included)

• tracking force range : 0 - 25mn (OM5 18mn recommended)

• included accessory : power supply, dust cover

• Power consumption : 4,5 watts

• dimensions : 420 x 112 x 330mm (WxHxD)

• weight : 4,0 kg net

• High precision turntable with cast aluminum plate
• Fully automatic system for easy operation
• Built-in equalizer for connection to PHONO input
• Transfer music from analog LP to USB memory (without PC)
• Includes PC software for assembling tracks

The DP-200USB is a fully automatic record player that easily converts your analogue records into digital files and stores them onto a USB memory stick. Using USB memory makes it easy to carry your digital files when you donʼt have a PC near your record player. 
 Easily store your record library onto USB memory: Simply insert your USB memory stick into the USB port on the front, press the Start and Record buttons, and the DP-200USB converts your record into digital files. You don\'t need to have a PC nearby. When you insert the USB memory stick into a DENON S-52DAB or RCD-M37DAB, you can enjoy the music files in the high-quality sound that Denon audio products are renowned for. You can also record the music to a USB player that supports MP3 files and enjoy listening to the music directly from the player. 
 Includes Trans Music Manager, to obtain track numbers and information: The DP-200USB comes with Trans Music Manager (on CD-ROM) that detects the silent spaces between tracks to automatically split track numbers. You can also use a PC to access the Gracenote® music ID server and obtain track information. 
 Built-in Phono Equalizer: The DP-200USBʼs built-in Phono Equalizer lets you enjoy the music on a mini audio system or radio cassette player that does not have a PHONO jack. (The Phono Equalizer can be switched on or off.) 
 Fully automatic player: When you select the 30cm (12“) or 17cm (7“) record size, the arm automatically moves to the correct position for playing the record, and after itʼs finished, the arm automatically returns to its original position. This automatic system makes it easy to play records on the DP-200USB. 
 Aluminium diecast turntable: The DP-200USB has an aluminium diecast turntable for high inertial mass and stable rotation. 
 Includes MM cartridge 
 Trans Music Manager functions: Auto MP3 Splitter: Detects silent part between tracks and automatically tags tracks / Manual MP3 Splitter: Manually tags tracks as you wish / Auto Music ID Record: automatically enables to record music information including titles / Manual MusicID Record: manually enables to record music information including titles / Required System OS; Microsoft® Windows® Vista/XP/2000 / Language: ENGLISH, GERMAN, FRENCH 
 Color variations: Silver and Black 
 Drive system: Belt Drive Motor 
 Motor: DC Servo Motor 
 Speed: 33-1/3, 45 rpm 
 Wow & flutter: 0.15 % (WRMS) 
 Tonearm: Type Dynamically Balance type, Straight Tonearm 
 Cartridge: Type MM / Replaceable stylus number DSN-84 / Output Voltage with equalizer OFF 2.5 mV, with equalizer ON 150 mV 
 Digital recording media: USB memory (Mass Storage Class) 
 Digital recording file type: MP3, 192 kbps 
 Power supply: AC 230 V, 50 Hz 
 Power consumption: 12 W 
 Dimensions (WxHxD): Dust cover closed 360 x 98 x 358 mm / Max., Dust cover opened 360 x 415 x 363 mm 
 Weight: 3.2 kg