THORENS TD 202 Belt drive Turntable (Black hg)

655.00 incl. GR VAT

In stock

EAN: N/A
Installments calculation
CompareAdd to wishlist Submit Better Price
Availability: Available in 1-3 d. Available in 1-3 d. SKU: TD 202 Category:
Thorens TD 202 Turnable Compared with its “smaller” brother TD 201 it comes with a more massive plinth and a AT 95E cartridge.  New TD 202 completes the new series of manual plug and play turntables. Compared with its “smaller” brother TD 201 it comes with a more massive plinth and a AT 95E cartridge.  […]

 

Read more

Thorens TD 202 Turnable
Compared with its “smaller” brother TD 201 it comes with a more massive plinth and a AT 95E cartridge. 

New TD 202 completes the new series of manual plug and play turntables. Compared with its “smaller” brother TD 201 it comes with a more massive plinth and a AT 95E cartridge. 

SPECIAL FEATURES

The integrated phono stage includes an additional analogue/digital converter with USB out. So the record played will be automatically digitized and can easily be recorded on a computer using several kinds of recording software that can be downloaded from the web.

TD 202 Specification

Turntable section 

Drive System Belt Drive

Motor DC

Motor Speed 33 1/3 RPM, 45 RPM

Rotation Speed Variation +/–2%

Wow and Flutter 0.2%

Signal-to-Noise Ratio 67dB or higher (A-weighted, 20kHz LPF) 60dB or higher (unweighted, 20kHz LPF)

Platter Aluminum Die-cast Diameter of Platter 12“, 300mm

Tonearm section 

Alumi tube

Type Static Balance, Straight

Effective Arm Length 8.8“, 223.6mm

Stylus Pressure Range 0 to 4g

Supported Cartridge Weight 3.5 to 6.0g

Overhang 18.6mm

Anti-skating Adjustment Supported

Cartridge section 

Type MM type (Audio-Technica AT-95E)

Stylus Construction Bonded Diamond

Frequency Response 20Hz to 20kHz

Channel Separation >18dB

Channel Balance 2.5dB

Vertical Tracking Angle 20 degrees

Supported Load Impedance 47k ohms

Output Voltage 2.5mV (1kHz, 3.54cm/sec.)

Stylus Pressure 2.0g +/–0.5g

Cartridge Weight 5.7g +/–0.5g Head-shell

Weight 11g (including Screws, Nuts and Wires) 

Analog Output 

Connector RCA Pin jack (Gold-plated) Power AC 100 to 240V, 50/60Hz Power Consumption 1.5W (less than 0.5W at Standby)

Overall Dimensions (W x H x D) 420 x 355x 121mm

Weight Approx. 3.9 kg

Weight 4.00 kg

Reviews

There are no reviews yet.

Be the first to review “THORENS TD 202 Belt drive Turntable (Black hg)”

Your email address will not be published. Required fields are marked *

Quick Comparison

THORENS TD 202 Belt drive Turntable (Black hg) removePro-Ject Essential II with phono USB Turntable Red removePro-Ject Elemental Phono USB + OM 5e Turntable Silver-Black removeTHORENS TD 158 Turntable drive belt (black) removeJB Systems Q3-USB DJ TURNTABLE 33, 45, 78 rpm removePro-Ject Debut Carbon DC OM10 Turntable Green remove
NameTHORENS TD 202 Belt drive Turntable (Black hg) removePro-Ject Essential II with phono USB Turntable Red removePro-Ject Elemental Phono USB + OM 5e Turntable Silver-Black removeTHORENS TD 158 Turntable drive belt (black) removeJB Systems Q3-USB DJ TURNTABLE 33, 45, 78 rpm removePro-Ject Debut Carbon DC OM10 Turntable Green remove
Image
SKUTD 202ESIIUSBREDELEMENTALUSBSBTD-158120011DCOM10G
Rating
Price655.00 incl. GR VAT 384.39 incl. GR VAT335.00 incl. GR VAT398.99 incl. GR VAT279.00 incl. GR VAT449.00 incl. GR VAT
Stock

In stock

Only 1 left in stock

Only 1 left in stock (can be backordered)

Available on backorder

Available on backorder

In stock

AvailabilityIn stockOnly 1 left in stockOnly 1 left in stock (can be backordered)Available on backorderAvailable on backorderIn stock
Add to cart

Add to cart

Add to cart

Add to cart

Add to cart

Add to cart

Add to cart

Description
Content

Thorens TD 202 Turnable Compared with its "smaller” brother TD 201 it comes with a more massive plinth and a AT 95E cartridge. 

New TD 202 completes the new series of manual plug and play turntables. Compared with its "smaller” brother TD 201 it comes with a more massive plinth and a AT 95E cartridge. 

SPECIAL FEATURES

The integrated phono stage includes an additional analogue/digital converter with USB out. So the record played will be automatically digitized and can easily be recorded on a computer using several kinds of recording software that can be downloaded from the web.

TD 202 Specification

Turntable section 

Drive System Belt Drive

Motor DC

Motor Speed 33 1/3 RPM, 45 RPM

Rotation Speed Variation +/–2%

Wow and Flutter 0.2%

Signal-to-Noise Ratio 67dB or higher (A-weighted, 20kHz LPF) 60dB or higher (unweighted, 20kHz LPF)

Platter Aluminum Die-cast Diameter of Platter 12“, 300mm

Tonearm section 

Alumi tube

Type Static Balance, Straight

Effective Arm Length 8.8“, 223.6mm

Stylus Pressure Range 0 to 4g

Supported Cartridge Weight 3.5 to 6.0g

Overhang 18.6mm

Anti-skating Adjustment Supported

Cartridge section 

Type MM type (Audio-Technica AT-95E)

Stylus Construction Bonded Diamond

Frequency Response 20Hz to 20kHz

Channel Separation >18dB

Channel Balance 2.5dB

Vertical Tracking Angle 20 degrees

Supported Load Impedance 47k ohms

Output Voltage 2.5mV (1kHz, 3.54cm/sec.)

Stylus Pressure 2.0g +/–0.5g

Cartridge Weight 5.7g +/–0.5g Head-shell

Weight 11g (including Screws, Nuts and Wires) 

Analog Output 

Connector RCA Pin jack (Gold-plated) Power AC 100 to 240V, 50/60Hz Power Consumption 1.5W (less than 0.5W at Standby)

Overall Dimensions (W x H x D) 420 x 355x 121mm

Weight Approx. 3.9 kg

A quiet-running synchronous motor with silicone belt is driving a low-resonance platter made from MDF. A new motor control with DC power supply minimzes unwanted vibration effectively. The main platter bearing consists of stainless steelspindle and bronze bushing with Teflon bottom to seccure low friction.  

The main chassis is made from lightweight, but very stiff particle board. Essential II utilises a straight 8,6" aluminium tonearm design made from a single piece of aluminium with sapphire bearings, which offers a far better „plug & play" solution, than itʽs predecessor. Special feet effectively decouples the turntable from the surface.

Specifications:

  • speed : 33, 45 (manual speed change)

  • principle : belt drive

  • Speed variance : 33: 0,14% 45: 0,25%

  • Wow & flutter : 0,12%

  • platter : 300mm MDF with felt mat (0,8kg)

  • main bearing : stainless steel

  • tonearm : 8,6” aluminium

  • effective : arm length 218,5 mm

  • overhang : 22,0mm

  • effective tonearmmass : 8,0gr

  • counterweight for mass : 3 - 5,5g (included)

  • tracking force range : 0 - 25mn (OM5 18mn recommended)

  • included accessory : power supply, dust cover

  • Power consumption : 4,5 watts

  • dimensions : 420 x 112 x 330mm (WxHxD)

  • weight : 4,0 kg net

Best buy turntable with maximum simplicity, outstanding sound quality & USB recording capability!

Pro-Ject has decided to go after the cheap plastic turntable market with an high quality alternative that comes complete with an Ortofon cartridge. The new Elemental Phono USB table is a real "plug'n'play" all the way. No adjustment of counterweight and antiskating is needed, because both are pre-adjusted. This new straight tonearm is optimised for Ortofon OM cartridge series. All the buyer needs to do is remove it from the box, remove bearing guard, locate the belt around the platter, remove stylus guard and plug it into hifi system and computer.

The only plastic here is the stylus guard!

The hidden secret to the new table's sonic success, is a central gravity mass point, made from artificial stone and placed directly underneath the platter bearing. It is capable to fully absorb unwanted rumble and motor vibration. This turntable appears to be pure simplicity itself, while maintaining high quality audio standards and vinyl recording capability.

• Belt drive system
• Integrated motor control with DC power supply secures silent running
• Central gravity mass point made from artificial stone
• Main platter bearing made from stainless steel runs in bronze bushing with Teflon bottom
• Low resonance MDF platter with felt mat
• 8,6” ultra low mass tonearm with straight arm tube
• Pre-adjusted tracking force & antiskating
• Gold-plated RCA contacts & cartridge pins
• Integrated phono stage with precise RIAA equalisation
• Line level output
• A/D converter for vinyl recording with USB B output

• Colour options: red-black, white-black, silver-black

The TD 158 is a complete and comfortable record player. Plug-and-play, so to speak. It goes without saying that it features a fully automatic mode of operation, an electronic speed selector and last but not least, a high-quality acrylic cover to keep dust away.

 Tonearm and cartridge have been pre-mounted and painstakingly adjusted in the factory. All necessary leads are supplied with the unit and the record player is ready to play with a flick of the wrist. The entry into the wonderful world of analog music is as simple as this!

 

Fully automatic, internal flat drive belt,
Speeds 33-1/3, 45 rpm,  Tonearm THORENS TP 17,  Pick-up Cartridge DN 251 S,
Dimensions  440 x 120 x 360 mm (W x H x D), 
Finish black structured enamel ,mains adapter, dust cover (acrylic), RCA interconnects

 

JB Systems Q3-USB features: 

  • high torque direct drive motor 
  • fast start / stop 
  • 3 speeds: 33, 45, 78 rpm with quartz lock 
  • 2 pitch adjustment ranges: +/-10% ; +/-20% 
  • forward / reverse play 
  • starting torque: More than 1.6kgf / cm 
  • starting time: less than 1 second 
  • braking time: less than 1 second 
  • tracking error angle: less than 3° 
  • USB-output for direct recording to any PC 
  • free, multilingual Audacity software available via download: 
  • endless possibilities with free downloadable effect plug-ins 
  • import, export and edit Ogg Vorbis, MP3, AIFF and WAV sound files. 
  • cut, copy, splice, and mix sounds together. 
  • change the speed or pitch of a recording. 
  • remove static, hiss, hum, or other constant background noises. 
  • alter frequencies with Equalization, FFT Filter, and Bass Boost effects. 
  • adjust volumes with Compressor, Amplify, and Normalize effects. 
  • selectable phono/line output 
  • all functions are equipped with stylish, blue LED lights 
  • plastic dust cover 
  • retractable target light 
  • Audio Technica cartridge included 
  • all metal S-shaped tone arm assembly with: counterweight, anti-skating adjustment, lever lift with 
  • height adjustment 
  • adjustable large feet for perfect leveling 
  • phono output: 1,5~3,6mV 
  • line-output: 90~216mV 
  • PC interface: USB 1.1 compatible (Win XP/Vista/Win7 or Mac OS X) 
  • power supply: 230V 
  • power consumption: 11 watt 
  • dimensions: 450 x 352 x 157 mm 
  • weight: 10,5 kg

The first Debut turntable, introduced in the late 1990s, was a revolution for the hi-fi industry. For the first time after the arrival of Compact Disc and the assumed demise of vinyl records, an analogue product re-emerged in the "mass market” – something all music lovers could afford.  

The new DEBUT Carbon DC has been designed to set new standards in this category for the coming decade – perfectly timed as analogue today is again a respected source, while the demand for good turntables is growing again!  

The most obvious improvement is the inclusion of a CARBON TUBE for the tonearm, which increases stiffness and decreases unwanted resonance.  

This material normally is extensively used in high-end tonearms, but – because of cost reasons – was never used in products at lower price levels. Together with other improvements like an increase in platter size and weight to realize even smoother rotation, the overall sound quality is greatly improved. The approved belt drive design offers low noise AC motor with effective motor decoupling (utilising TPE-damping) and ultra precision frequency DC-driven AC generator (like Speed Box) for ultimate speed stability without unwanted vibration.  

The DEBUT CARBON DC will be offered in high-gloss black or shiny red, green, blue, yellow, silver or white as no-added-cost option.

Specifications:

  •  8,6” carbon tonearm  

  •  Increased platter size with more weight  

  •  Precision belt drive with synchronous motor  

  •  New DC power supply with ultra precision frequency DC-driven AC generator (like Speed Box) for ultimate speed stability.  

  •  New TPE motor suspension  

  •  Felt mat  

  •  magnetic cartridge options from Ortofon OM 10 or 2M red  

  •  7 high-gloss colours

Weight4.00 kg5.00 kg3.50 kg4.00 kg10.50 kg6.50 kg
DimensionsN/AN/AN/AN/AN/AN/A
Additional information
Weight 4.00 kg
Weight 5.00 kg
Weight 3.50 kg
Weight 4.00 kg
Weight 10.50 kg
Weight 6.50 kg