THORENS TD 203 Belt drive Turntable (Red hg)

A NEW REFERENCE FOR THE ENTRY LEVEL

The TD 203 is a high quality out of the box solution from THORENS®. The turntable comes fully assembled and is factory-set. It takes no more than five minutes from opening the box to playing music from a vinyl record. The TD 203 leaves aficionados room to fine-tune and adjust the performance to their personal preferences. The tonearm, for example, offers facilities to adjust azimuth and overhang. The pick-up cartridge can be easily changed in a matter of minutes. The scope of delivery includes a specially designed transparent Perspex dust cover.

The new Tonarm TP 82 is a uni-pivot design - a first in this class. The TP 82\'s bearing is a carbide tip resting within an intricate arrangement of five very small bearing balls. The arm tube is made from rolled aluminium. The anti-sakting bias is provided by a small weight. The tonearm comes pre-installed with the THORENS® TAS 257 cartridge, a high-quality moving-magnet pick-up suitable for all MM phono inputs.

• Low noise, low voltage electronically speed controlled DC motor
• Adjustable belt tension
• Adjustable platter speed
• Uni-pivot design tonearm TP 82
• Tonearm adjustable for azimuth an overhang
• Designed in Germany

A quiet-running synchronous motor with silicone belt is driving a low-resonance platter made from MDF. A new motor control with DC power supply minimzes unwanted vibration effectively. The main platter bearing consists of stainless steelspindle and bronze bushing with Teflon bottom to seccure low friction.  

The main chassis is made from lightweight, but very stiff particle board. Essential II utilises a straight 8,6" aluminium tonearm design made from a single piece of aluminium with sapphire bearings, which offers a far better „plug & play" solution, than itʽs predecessor. Special feet effectively decouples the turntable from the surface.

Specifications:

• speed : 33, 45 (manual speed change)

• principle : belt drive

• Speed variance : 33: 0,14% 45: 0,25%

• Wow & flutter : 0,12%

• platter : 300mm MDF with felt mat (0,8kg)

• main bearing : stainless steel

• tonearm : 8,6” aluminium

• effective : arm length 218,5 mm

• overhang : 22,0mm

• effective tonearmmass : 8,0gr

• counterweight for mass : 3 - 5,5g (included)

• tracking force range : 0 - 25mn (OM5 18mn recommended)

• included accessory : power supply, dust cover

• Power consumption : 4,5 watts

• dimensions : 420 x 112 x 330mm (WxHxD)

• weight : 4,0 kg net

High-quality materials, a classic design and love for details are the distinctive characteristics of this fully automatic record player. The massive and stable real wood plinth, which is available also with piano lacquer finish, provides the TD 240-2 with a timeless elegance.

This record player has been equipped with the new TP 19-1 tonearm and an extremely silent running precision belt drive beneath the platter, so that the other technical qualities are also most evident. Set-up and connections are effortlessly carried out so that the TD 240 is ready to play within minutes

Specs:

• Operation fully automatic
• Drive System internal flat drive belt
• Motor electronically controlled DC motor
• Speeds 33-1/3, 45, 78 rpm
• Speed Select electronically
• Platter 12” / 0.7 kg (aluminium, non-magnetic)
• Tonearm THORENS® TP 19-1
• Pick-up Cartridge THORENS® TAS 267
• Anti-skating (Bias) by spring (adjustable)
• Automatic Shut-off mechanically
• Cable Capacitance 160 pF
• Power Supply external mains adaptor (115-230 V / 50-60 Hz depending on type)
• Dimensions 430 x 130 x 365 mm (W x H x D)
• Weight 6.4 kg
• Finish solid wooden plinth with black piano laquer, black structured enamel,
• Scope of Delivery mains adapter, dust cover (acrylic), RCA interconnects, operating instructions

The first Debut turntable, introduced in the late 1990s, was a revolution for the hi-fi industry. For the first time after the arrival of Compact Disc and the assumed demise of vinyl records, an analogue product re-emerged in the "mass market” – something all music lovers could afford.  

The new DEBUT Carbon DC has been designed to set new standards in this category for the coming decade – perfectly timed as analogue today is again a respected source, while the demand for good turntables is growing again!  

The most obvious improvement is the inclusion of a CARBON TUBE for the tonearm, which increases stiffness and decreases unwanted resonance.  

This material normally is extensively used in high-end tonearms, but – because of cost reasons – was never used in products at lower price levels. Together with other improvements like an increase in platter size and weight to realize even smoother rotation, the overall sound quality is greatly improved. The approved belt drive design offers low noise AC motor with effective motor decoupling (utilising TPE-damping) and ultra precision frequency DC-driven AC generator (like Speed Box) for ultimate speed stability without unwanted vibration.  

The DEBUT CARBON DC will be offered in high-gloss black or shiny red, green, blue, yellow, silver or white as no-added-cost option.

Specifications:

•  8,6” carbon tonearm  

•  Increased platter size with more weight  

•  Precision belt drive with synchronous motor  

•  New DC power supply with ultra precision frequency DC-driven AC generator (like Speed Box) for ultimate speed stability.  

•  New TPE motor suspension  

•  Felt mat  

•  magnetic cartridge options from Ortofon OM 10 or 2M red  

•  7 high-gloss colours

The TD 158 is a complete and comfortable record player. Plug-and-play, so to speak. It goes without saying that it features a fully automatic mode of operation, an electronic speed selector and last but not least, a high-quality acrylic cover to keep dust away.

 Tonearm and cartridge have been pre-mounted and painstakingly adjusted in the factory. All necessary leads are supplied with the unit and the record player is ready to play with a flick of the wrist. The entry into the wonderful world of analog music is as simple as this!

Fully automatic, internal flat drive belt,
Speeds 33-1/3, 45 rpm,  Tonearm THORENS TP 17,  Pick-up Cartridge DN 251 S,
Dimensions  440 x 120 x 360 mm (W x H x D), 
Finish black structured enamel ,mains adapter, dust cover (acrylic), RCA interconnects

The first Debut turntable, introduced in the late 1990s, was a revolution for the hi-fi industry. For the first time after the arrival of Compact Disc and the assumed demise of vinyl records, an analogue product re-emerged in the "mass market” – something all music lovers could afford.  

The new DEBUT Carbon DC has been designed to set new standards in this category for the coming decade – perfectly timed as analogue today is again a respected source, while the demand for good turntables is growing again!  

The most obvious improvement is the inclusion of a CARBON TUBE for the tonearm, which increases stiffness and decreases unwanted resonance.  

This material normally is extensively used in high-end tonearms, but – because of cost reasons – was never used in products at lower price levels. Together with other improvements like an increase in platter size and weight to realize even smoother rotation, the overall sound quality is greatly improved. The approved belt drive design offers low noise AC motor with effective motor decoupling (utilising TPE-damping) and ultra precision frequency DC-driven AC generator (like Speed Box) for ultimate speed stability without unwanted vibration.  

The DEBUT CARBON DC will be offered in high-gloss black or shiny red, green, blue, yellow, silver or white as no-added-cost option.

Specifications:

•  8,6” carbon tonearm  

•  Increased platter size with more weight  

•  Precision belt drive with synchronous motor  

•  New DC power supply with ultra precision frequency DC-driven AC generator (like Speed Box) for ultimate speed stability.  

•  New TPE motor suspension  

•  Felt mat  

•  magnetic cartridge options from Ortofon OM 10 or 2M red  

•  7 high-gloss colours