THORENS TD 202 Belt drive Turntable (Black hg)

Thorens TD 202 Turnable Compared with its "smaller” brother TD 201 it comes with a more massive plinth and a AT 95E cartridge. 

New TD 202 completes the new series of manual plug and play turntables. Compared with its "smaller” brother TD 201 it comes with a more massive plinth and a AT 95E cartridge. 

The integrated phono stage includes an additional analogue/digital converter with USB out. So the record played will be automatically digitized and can easily be recorded on a computer using several kinds of recording software that can be downloaded from the web.

TD 202 Specification

Turntable section 

Drive System Belt Drive

Motor DC

Motor Speed 33 1/3 RPM, 45 RPM

Rotation Speed Variation +/–2%

Wow and Flutter 0.2%

Signal-to-Noise Ratio 67dB or higher (A-weighted, 20kHz LPF) 60dB or higher (unweighted, 20kHz LPF)

Platter Aluminum Die-cast Diameter of Platter 12“, 300mm

Tonearm section 

Alumi tube

Type Static Balance, Straight

Effective Arm Length 8.8“, 223.6mm

Stylus Pressure Range 0 to 4g

Supported Cartridge Weight 3.5 to 6.0g

Overhang 18.6mm

Anti-skating Adjustment Supported

Cartridge section 

Type MM type (Audio-Technica AT-95E)

Stylus Construction Bonded Diamond

Frequency Response 20Hz to 20kHz

Channel Separation >18dB

Channel Balance 2.5dB

Vertical Tracking Angle 20 degrees

Supported Load Impedance 47k ohms

Output Voltage 2.5mV (1kHz, 3.54cm/sec.)

Stylus Pressure 2.0g +/–0.5g

Cartridge Weight 5.7g +/–0.5g Head-shell

Weight 11g (including Screws, Nuts and Wires) 

Analog Output 

Connector RCA Pin jack (Gold-plated) Power AC 100 to 240V, 50/60Hz Power Consumption 1.5W (less than 0.5W at Standby)

Overall Dimensions (W x H x D) 420 x 355x 121mm

Weight Approx. 3.9 kg

Best buy turntable with maximum simplicity, outstanding sound quality & USB recording capability!

Pro-Ject has decided to go after the cheap plastic turntable market with an high quality alternative that comes complete with an Ortofon cartridge. The new Elemental Phono USB table is a real "plug'n'play" all the way. No adjustment of counterweight and antiskating is needed, because both are pre-adjusted. This new straight tonearm is optimised for Ortofon OM cartridge series. All the buyer needs to do is remove it from the box, remove bearing guard, locate the belt around the platter, remove stylus guard and plug it into hifi system and computer.

The only plastic here is the stylus guard!

The hidden secret to the new table's sonic success, is a central gravity mass point, made from artificial stone and placed directly underneath the platter bearing. It is capable to fully absorb unwanted rumble and motor vibration. This turntable appears to be pure simplicity itself, while maintaining high quality audio standards and vinyl recording capability.

• Belt drive system
• Integrated motor control with DC power supply secures silent running
• Central gravity mass point made from artificial stone
• Main platter bearing made from stainless steel runs in bronze bushing with Teflon bottom
• Low resonance MDF platter with felt mat
• 8,6” ultra low mass tonearm with straight arm tube
• Pre-adjusted tracking force & antiskating
• Gold-plated RCA contacts & cartridge pins
• Integrated phono stage with precise RIAA equalisation
• Line level output
• A/D converter for vinyl recording with USB B output

• Colour options: red-black, white-black, silver-black

• High precision turntable with cast aluminum plate
• Fully automatic system for easy operation
• Built-in equalizer for connection to PHONO input
• Transfer music from analog LP to USB memory (without PC)
• Includes PC software for assembling tracks

The DP-200USB is a fully automatic record player that easily converts your analogue records into digital files and stores them onto a USB memory stick. Using USB memory makes it easy to carry your digital files when you donʼt have a PC near your record player. 
 Easily store your record library onto USB memory: Simply insert your USB memory stick into the USB port on the front, press the Start and Record buttons, and the DP-200USB converts your record into digital files. You don\'t need to have a PC nearby. When you insert the USB memory stick into a DENON S-52DAB or RCD-M37DAB, you can enjoy the music files in the high-quality sound that Denon audio products are renowned for. You can also record the music to a USB player that supports MP3 files and enjoy listening to the music directly from the player. 
 Includes Trans Music Manager, to obtain track numbers and information: The DP-200USB comes with Trans Music Manager (on CD-ROM) that detects the silent spaces between tracks to automatically split track numbers. You can also use a PC to access the Gracenote® music ID server and obtain track information. 
 Built-in Phono Equalizer: The DP-200USBʼs built-in Phono Equalizer lets you enjoy the music on a mini audio system or radio cassette player that does not have a PHONO jack. (The Phono Equalizer can be switched on or off.) 
 Fully automatic player: When you select the 30cm (12“) or 17cm (7“) record size, the arm automatically moves to the correct position for playing the record, and after itʼs finished, the arm automatically returns to its original position. This automatic system makes it easy to play records on the DP-200USB. 
 Aluminium diecast turntable: The DP-200USB has an aluminium diecast turntable for high inertial mass and stable rotation. 
 Includes MM cartridge 
 Trans Music Manager functions: Auto MP3 Splitter: Detects silent part between tracks and automatically tags tracks / Manual MP3 Splitter: Manually tags tracks as you wish / Auto Music ID Record: automatically enables to record music information including titles / Manual MusicID Record: manually enables to record music information including titles / Required System OS; Microsoft® Windows® Vista/XP/2000 / Language: ENGLISH, GERMAN, FRENCH 
 Color variations: Silver and Black 
 Drive system: Belt Drive Motor 
 Motor: DC Servo Motor 
 Speed: 33-1/3, 45 rpm 
 Wow & flutter: 0.15 % (WRMS) 
 Tonearm: Type Dynamically Balance type, Straight Tonearm 
 Cartridge: Type MM / Replaceable stylus number DSN-84 / Output Voltage with equalizer OFF 2.5 mV, with equalizer ON 150 mV 
 Digital recording media: USB memory (Mass Storage Class) 
 Digital recording file type: MP3, 192 kbps 
 Power supply: AC 230 V, 50 Hz 
 Power consumption: 12 W 
 Dimensions (WxHxD): Dust cover closed 360 x 98 x 358 mm / Max., Dust cover opened 360 x 415 x 363 mm 
 Weight: 3.2 kg

JB Systems Q3-USB features: 

• high torque direct drive motor 
• fast start / stop 
• 3 speeds: 33, 45, 78 rpm with quartz lock 
• 2 pitch adjustment ranges: +/-10% ; +/-20% 
• forward / reverse play 
• starting torque: More than 1.6kgf / cm 
• starting time: less than 1 second 
• braking time: less than 1 second 
• tracking error angle: less than 3° 
• USB-output for direct recording to any PC 
• free, multilingual Audacity software available via download: 
• endless possibilities with free downloadable effect plug-ins 
• import, export and edit Ogg Vorbis, MP3, AIFF and WAV sound files. 
• cut, copy, splice, and mix sounds together. 
• change the speed or pitch of a recording. 
• remove static, hiss, hum, or other constant background noises. 
• alter frequencies with Equalization, FFT Filter, and Bass Boost effects. 
• adjust volumes with Compressor, Amplify, and Normalize effects. 
• selectable phono/line output 
• all functions are equipped with stylish, blue LED lights 
• plastic dust cover 
• retractable target light 
• Audio Technica cartridge included 
• all metal S-shaped tone arm assembly with: counterweight, anti-skating adjustment, lever lift with 
• height adjustment 
• adjustable large feet for perfect leveling 
• phono output: 1,5~3,6mV 
• line-output: 90~216mV 
• PC interface: USB 1.1 compatible (Win XP/Vista/Win7 or Mac OS X) 
• power supply: 230V 
• power consumption: 11 watt 
• dimensions: 450 x 352 x 157 mm 
• weight: 10,5 kg