| Content |
A NEW REFERENCE FOR THE ENTRY LEVEL
The TD 203 is a high quality out of the box solution from THORENS®. The turntable comes fully assembled and is factory-set. It takes no more than five minutes from opening the box to playing music from a vinyl record. The TD 203 leaves aficionados room to fine-tune and adjust the performance to their personal preferences. The tonearm, for example, offers facilities to adjust azimuth and overhang. The pick-up cartridge can be easily changed in a matter of minutes. The scope of delivery includes a specially designed transparent Perspex dust cover.
The new Tonarm TP 82 is a uni-pivot design - a first in this class. The TP 82\'s bearing is a carbide tip resting within an intricate arrangement of five very small bearing balls. The arm tube is made from rolled aluminium. The anti-sakting bias is provided by a small weight. The tonearm comes pre-installed with the THORENS® TAS 257 cartridge, a high-quality moving-magnet pick-up suitable for all MM phono inputs.
SPECIAL FEATURES
- Low noise, low voltage electronically speed controlled DC motor
- Adjustable belt tension
- Adjustable platter speed
- Uni-pivot design tonearm TP 82
- Tonearm adjustable for azimuth an overhang
- Designed in Germany
| Pro-Ject has decided to go after the cheap plastic turntable market with an high quality alternative that comes complete with an Ortofon cartridge. The new Elemental table is a real "plug'n'play" all the way. No adjustment of counterweight and antiskating is needed, because both are pre-adjusted. This new straight ultra low mass tonearm is optimised for Ortofon OM cartridge series. All the buyer needs to do is remove it from the box, remove bearing guard, locate the belt around the platter, remove stylus guard and plug it in.
The only plastic here is the stylus guard. The hidden secret to the new table's sonic success, is a central gravity mass point, made from artificial stone and placed directly underneath the platter bearing. It is capable to fully absorb unwanted rumble and motor vibration. This turntable appears to be pure simplicity itself, while maintaining high quality audio standards.
The hidden secret to the new table's sonic success, is a central gravity mass point, made from artificial stone and placed directly underneath the platter bearing. It is capable to fully absorb unwanted rumble and motor vibration. This turntable appears to be pure simplicity itself, while maintaining high quality audio standards.
- Belt drive system with low vibration DC motor
- Central gravity mass point made from artificial stone
- Main platter bearing made from stainless steel runs in bronze bushing with Teflon bottom
- Low resonance MDF platter with felt mat
- 8,6” ultra low mass tonearm with straight arm tube
- Pre-adjusted tracking force & antiskating
- Gold-plated RCA contacts & cartridge pins
- Colour options: red-black, white-black, silver-black
Specifications:
- speed : 33, 45 (manual speed change)
- Speed variance: 33: 0,2% 45: 0,18%
- Wow & flutter: 33: 0,14% 45: 0,13%
- platter: 300mm MDF
- tonearm: 8,6” metal tube
- effective arm length: 218,5 mm
- overhang: 22,0 mm
- effective tonearmmass: 8,0gr
- counterweight for cartridge mass: 3 - 5,5g (included)
- tracking force range: 0 - 30mn (OM5 18mn pre-adjusted)
- output: RCA to phono input
- included accessory: RCA cable, 15V DC power supply
- power consumption: 4,0 watts
- dimensions: 430 x 90 x 300mm (WxHxD)
- weight: 2,7 kg net
| Cardan bearing with zero-mass tracking force setting by a
high-precision torsion spring.
Removable headshell with 1/2 inch fixing holes. Adjustable
tracking force and anti-skating.
Headshell made of carbon fiber for special rigid torsion.
Chassis technology
Solid wooden console. Floating sub-chassis.Vibration
-damped aluminum turntables with anti-static felt mat.
Drive technology
Belt drive with smooth flat belt. DC motor with electronic rotary speed control. Viscosity-damped tone
arm lift. Automatic tone-arm cueing mechanism. Auto stop with ton arm return. Possibilities to play-back
archived discs with a rotational speed of 78 Upm.
Delivered with magnetic pick-up OMB 10.
High quality, fully automatic turntable with three speeds (33, 45, 78 rpm). This turntable meets all the criteria. Sophisticated technology, greatest convenience combined with great sound leaves the listener with no unfulfilled wishes.
Tone arm technology:
Cardan bearing with zero-mass tracking force setting, thanks to precision torsion spring. Detachable headshell with 13mm (1/2-inch) fixing-holes. Adjustable tracking force and anti-skating. Extremely rigid headshell made of carbon fiber.
Chassis technology:
Solid wooden chassis. Floating sub chassis. Vibration damping aluminium platter with antistatic felt mat.
Drive technology:
Belt drive with polished flat belt. DC motor with electronic speed control. Viscosity-damped arm lift. Automatic tone arm cue. Auto Stop with tone arm return. Playback option for archive disks with 78 rpm speed. Delivered with OMB 10 cartridge.
Specifications:
- Speed r/min.: 33/45/78
- Speed a ccuracy in% DIN / WRMS: < -/+ 0,07 / 0,04 % DIN
- Rumble-to-noise ratio: 48 dB
- Rumble-noise ratio: 72 dB
- Cartridge system: OMB 10
- Frequency Response: 20 Hz - 22 kHz
- Depth sensing capability (300 Hz): 70 µm at 315 Hz
- Dimensions (WxHxD): 440 x 119 x 360 mm
- Weight: 5,43 kg
- Colour: black / silver
- Power supply: 12V DC, 150 mA
|
The first Debut turntable, introduced in the late 1990s, was a revolution for the hi-fi industry. For the first time after the arrival of Compact Disc and the assumed demise of vinyl records, an analogue product re-emerged in the "mass market” – something all music lovers could afford.
The new DEBUT Carbon DC has been designed to set new standards in this category for the coming decade – perfectly timed as analogue today is again a respected source, while the demand for good turntables is growing again!
The most obvious improvement is the inclusion of a CARBON TUBE for the tonearm, which increases stiffness and decreases unwanted resonance.
This material normally is extensively used in high-end tonearms, but – because of cost reasons – was never used in products at lower price levels. Together with other improvements like an increase in platter size and weight to realize even smoother rotation, the overall sound quality is greatly improved. The approved belt drive design offers low noise AC motor with effective motor decoupling (utilising TPE-damping) and ultra precision frequency DC-driven AC generator (like Speed Box) for ultimate speed stability without unwanted vibration.
The DEBUT CARBON DC will be offered in high-gloss black or shiny red, green, blue, yellow, silver or white as no-added-cost option.
Specifications:
-
8,6” carbon tonearm
-
Increased platter size with more weight
-
Precision belt drive with synchronous motor
-
New DC power supply with ultra precision frequency DC-driven AC generator (like Speed Box) for ultimate speed stability.
-
New TPE motor suspension
-
Felt mat
-
magnetic cartridge options from Ortofon OM 10 or 2M red
-
7 high-gloss colours
| Pro-Ject has decided to go after the cheap plastic turntable market with an high quality alternative that comes complete with an Ortofon cartridge. The new Elemental table is a real "plug'n'play" all the way. No adjustment of counterweight and antiskating is needed, because both are pre-adjusted. This new straight ultra low mass tonearm is optimised for Ortofon OM cartridge series. All the buyer needs to do is remove it from the box, remove bearing guard, locate the belt around the platter, remove stylus guard and plug it in.
The only plastic here is the stylus guard. The hidden secret to the new table's sonic success, is a central gravity mass point, made from artificial stone and placed directly underneath the platter bearing. It is capable to fully absorb unwanted rumble and motor vibration. This turntable appears to be pure simplicity itself, while maintaining high quality audio standards.
The hidden secret to the new table's sonic success, is a central gravity mass point, made from artificial stone and placed directly underneath the platter bearing. It is capable to fully absorb unwanted rumble and motor vibration. This turntable appears to be pure simplicity itself, while maintaining high quality audio standards.
- Belt drive system with low vibration DC motor
- Central gravity mass point made from artificial stone
- Main platter bearing made from stainless steel runs in bronze bushing with Teflon bottom
- Low resonance MDF platter with felt mat
- 8,6” ultra low mass tonearm with straight arm tube
- Pre-adjusted tracking force & antiskating
- Gold-plated RCA contacts & cartridge pins
- Colour options: red-black, white-black, silver-black
Specifications:
- speed : 33, 45 (manual speed change)
- Speed variance: 33: 0,2% 45: 0,18%
- Wow & flutter: 33: 0,14% 45: 0,13%
- platter: 300mm MDF
- tonearm: 8,6” metal tube
- effective arm length: 218,5 mm
- overhang: 22,0 mm
- effective tonearmmass: 8,0gr
- counterweight for cartridge mass: 3 - 5,5g (included)
- tracking force range: 0 - 30mn (OM5 18mn pre-adjusted)
- output: RCA to phono input
- included accessory: RCA cable, 15V DC power supply
- power consumption: 4,0 watts
- dimensions: 430 x 90 x 300mm (WxHxD)
- weight: 2,7 kg net
|
Specifications
Item name: Turntable
Item code: Q1-USB
Brand:JBSYSTEMS
Brief Introduction
1.Plastic dust cover
2.USB-output for direct recording to any PC
3.Belt Drive 2 speed
:: Product Description
* Middle Torque belt drive motor
* Fast start / stop
* 2 speeds: 33, 45 rpm
* +/-10% Pitch adjustment range
* USB-output for direct recording to any PC
* Free, multilingual Audacity software available via download:
* - Endless possibilities with free downloadable effect plug-ins
* - Import, export and edit Ogg Vorbis, MP3, AIFF and WAV sound files.
* - Cut, copy, splice, and mix sounds together.
* - Change the speed or pitch of a recording.
* - Remove static, hiss, hum, or other constant background noises.
* - Alter frequencies with Equalization, FFT Filter, and Bass Boost effects.
* - Adjust volumes with Compressor, Amplify, and Normalize effects.
* - Many more…
* Selectable phono/line output
* All functions are equipped with stylish, blue LED lights
* Plastic dust cover
* Retractable target light
* Audio Technica cartridge included
* All metal S-shaped tone arm assembly with:
* - Counterweight * - Anti-skating adjustment
* - Lever lift with height adjustment
* Adjustable large feet for perfect leveling
:: Technical Information
* Motor: DC motor
* Driving Method: Belt Drive
* Starting Time: less than 1 second
* Braking Time: less than 1 second
* Speed selection: 331/3 ~ 45 RPM
* Speed adjustment: +/-10%
* Wow & Flutter: less than 0,25% WRMS (JIS WTD) @ 331/3 RPM
* Tone arm type: Static balanced S-shaped tone arm.
* Tracking Error angle: Less than 3°
* Cartridge weight: 3,5~8,5g.
* Anti-skate range: 0~7g.
* Phono output: 1,5 ~ 3,6mV @ 1kHz 5cm/sec (with supplied AT HP-4005 cartridge)
* Line output: 90 ~ 216mV @ 1kHz 5cm/sec (with supplied AT HP-4005 cartridge)
* Computer interface USB 1.1 compliant (Windows(R) XP/Vista/Win7 or Mac(R) OS X)
* Power supply: 230V~ 50Hz.
* Power consumption: 14Watts
* Dimensions: 450 x 350 x 150mm (WxDxH)
* Weight : 9,0kg.
|
Reviews
There are no reviews yet.