THORENS TD 201 Belt drive Turntable (White hg)

565.00 incl. GR VAT

In stock

EAN: N/A
Installments calculation
CompareAdd to wishlist Submit Better Price
Availability: Available in 1-3 d. Available in 1-3 d. SKU: TD 201 WHITE HG Category:
The new Thorens TD 201 is the right choice for anyone looking for a robust, easy to use plug and play turntable. It comes with a smooth running belt drive and a aluminium platter with rubber mat. The new Thorens TP 71 tonearm uses a detachable headshell with preconfigured AT 3600 cartridge. SPECIAL FEATURES Using […]

 

Read more

The new Thorens TD 201 is the right choice for anyone looking for a robust, easy to use plug and play turntable. It comes with a smooth running belt drive and a aluminium platter with rubber mat. The new Thorens TP 71 tonearm uses a detachable headshell with preconfigured AT 3600 cartridge.

SPECIAL FEATURES

Using the switchable integrated phono stage the TD 201 can be connected to any amplifier or receiver even if it does not have a specific input for phono devices.

TD 201 Specification

Turntable section

Drive System Belt Drive

Motor DC Motor

Speed 33 1/3 RPM, 45 RPM

Rotation Speed Variation +/–2%

Wow and Flutter 0.2%

Signal-to-Noise Ratio 67dB or higher (A-weighted, 20kHz LPF) 60dB or higher (unweighted, 20kHz LPF)

Platter Aluminum Die-cast Diameter of Platter 12“, 300mm

Tonearm section Alumi tube

Type Static Balance, Straight

Effective Arm Length 8.8“, 223.6mm

Stylus Pressure Range 0 to 4g

Supported Cartridge Weight 3.5 to 6.0g

Overhang 18.6mm

Anti-skating Adjustment Supported

Cartridge section

Type MM type (Audio-Technica AT3600)

Stylus Construction Bonded Diamond

Frequency Response 20Hz to 20kHz

Channel Separation >18dB Channel Balance 2.5dB

Vertical Tracking Angle 20 degrees

Supported Load Impedance 47k ohms

Output Voltage 2.5mV (1kHz, 3.54cm/sec.)

Stylus Pressure 3.5g +/–0.5g

Cartridge Weight 5g +/–0.5g

Head-shell Weight 10g (including Screws, Nuts and Wires)

Analog Output

Connector RCA Pin jack (Gold-plated)

Power AC 100 to 240V, 50/60Hz Power Consumption 1.5W (less than 0.5W at Standby)

Overall Dimensions (W x H x D) 420 x 355x 121mm

Weight Approx. 3.9 kg

Weight 4.00 kg

Reviews

There are no reviews yet.

Be the first to review “THORENS TD 201 Belt drive Turntable (White hg)”

Your email address will not be published. Required fields are marked *

Quick Comparison

THORENS TD 201 Belt drive Turntable (White hg) removePro-Ject Essential II with phono USB Turntable White removePro-Ject Debut Carbon DC OM10 Turntable Black Piano removePro-Ject Elemental Phono USB + OM 5e Turntable Red-Black removeTHORENS TD 158 Turntable drive belt (black) removeTHORENS TD 240-2 Belt drive Turntable 78rpm (Black hg) remove
NameTHORENS TD 201 Belt drive Turntable (White hg) removePro-Ject Essential II with phono USB Turntable White removePro-Ject Debut Carbon DC OM10 Turntable Black Piano removePro-Ject Elemental Phono USB + OM 5e Turntable Red-Black removeTHORENS TD 158 Turntable drive belt (black) removeTHORENS TD 240-2 Belt drive Turntable 78rpm (Black hg) remove
Image
SKUTD 201 WHITE HGESIIUSBWDCOM10BELEMENTALUSBRBTD-158TD 240-2 Black HG
Rating
Price565.00 incl. GR VAT 384.39 incl. GR VAT449.00 incl. GR VAT335.00 incl. GR VAT398.99 incl. GR VAT910.00 incl. GR VAT
Stock

In stock

Only 1 left in stock

In stock

Only 1 left in stock (can be backordered)

Available on backorder

Available on backorder

AvailabilityIn stockOnly 1 left in stockIn stockOnly 1 left in stock (can be backordered)Available on backorderAvailable on backorder
Add to cart

Add to cart

Add to cart

Add to cart

Add to cart

Add to cart

Add to cart

Description
ContentThe new Thorens TD 201 is the right choice for anyone looking for a robust, easy to use plug and play turntable. It comes with a smooth running belt drive and a aluminium platter with rubber mat. The new Thorens TP 71 tonearm uses a detachable headshell with preconfigured AT 3600 cartridge. SPECIAL FEATURES Using the switchable integrated phono stage the TD 201 can be connected to any amplifier or receiver even if it does not have a specific input for phono devices. TD 201 Specification Turntable section Drive System Belt Drive Motor DC Motor Speed 33 1/3 RPM, 45 RPM Rotation Speed Variation +/–2% Wow and Flutter 0.2% Signal-to-Noise Ratio 67dB or higher (A-weighted, 20kHz LPF) 60dB or higher (unweighted, 20kHz LPF) Platter Aluminum Die-cast Diameter of Platter 12“, 300mm Tonearm section Alumi tube Type Static Balance, Straight Effective Arm Length 8.8“, 223.6mm Stylus Pressure Range 0 to 4g Supported Cartridge Weight 3.5 to 6.0g Overhang 18.6mm Anti-skating Adjustment Supported Cartridge section Type MM type (Audio-Technica AT3600) Stylus Construction Bonded Diamond Frequency Response 20Hz to 20kHz Channel Separation >18dB Channel Balance 2.5dB Vertical Tracking Angle 20 degrees Supported Load Impedance 47k ohms Output Voltage 2.5mV (1kHz, 3.54cm/sec.) Stylus Pressure 3.5g +/–0.5g Cartridge Weight 5g +/–0.5g Head-shell Weight 10g (including Screws, Nuts and Wires) Analog Output Connector RCA Pin jack (Gold-plated) Power AC 100 to 240V, 50/60Hz Power Consumption 1.5W (less than 0.5W at Standby) Overall Dimensions (W x H x D) 420 x 355x 121mm Weight Approx. 3.9 kg

A quiet-running synchronous motor with silicone belt is driving a low-resonance platter made from MDF. A new motor control with DC power supply minimzes unwanted vibration effectively. The main platter bearing consists of stainless steelspindle and bronze bushing with Teflon bottom to seccure low friction.  

The main chassis is made from lightweight, but very stiff particle board. Essential II utilises a straight 8,6" aluminium tonearm design made from a single piece of aluminium with sapphire bearings, which offers a far better „plug & play" solution, than itʽs predecessor. Special feet effectively decouples the turntable from the surface.

Specifications:

  • speed : 33, 45 (manual speed change)

  • principle : belt drive

  • Speed variance : 33: 0,14% 45: 0,25%

  • Wow & flutter : 0,12%

  • platter : 300mm MDF with felt mat (0,8kg)

  • main bearing : stainless steel

  • tonearm : 8,6” aluminium

  • effective : arm length 218,5 mm

  • overhang : 22,0mm

  • effective tonearmmass : 8,0gr

  • counterweight for mass : 3 - 5,5g (included)

  • tracking force range : 0 - 25mn (OM5 18mn recommended)

  • included accessory : power supply, dust cover

  • Power consumption : 4,5 watts

  • dimensions : 420 x 112 x 330mm (WxHxD)

  • weight : 4,0 kg net

The first Debut turntable, introduced in the late 1990s, was a revolution for the hi-fi industry. For the first time after the arrival of Compact Disc and the assumed demise of vinyl records, an analogue product re-emerged in the "mass market” – something all music lovers could afford.  

The new DEBUT Carbon DC has been designed to set new standards in this category for the coming decade – perfectly timed as analogue today is again a respected source, while the demand for good turntables is growing again!  

The most obvious improvement is the inclusion of a CARBON TUBE for the tonearm, which increases stiffness and decreases unwanted resonance.  

This material normally is extensively used in high-end tonearms, but – because of cost reasons – was never used in products at lower price levels. Together with other improvements like an increase in platter size and weight to realize even smoother rotation, the overall sound quality is greatly improved. The approved belt drive design offers low noise AC motor with effective motor decoupling (utilising TPE-damping) and ultra precision frequency DC-driven AC generator (like Speed Box) for ultimate speed stability without unwanted vibration.  

The DEBUT CARBON DC will be offered in high-gloss black or shiny red, green, blue, yellow, silver or white as no-added-cost option.

Specifications:

  •  8,6” carbon tonearm  

  •  Increased platter size with more weight  

  •  Precision belt drive with synchronous motor  

  •  New DC power supply with ultra precision frequency DC-driven AC generator (like Speed Box) for ultimate speed stability.  

  •  New TPE motor suspension  

  •  Felt mat  

  •  magnetic cartridge options from Ortofon OM 10 or 2M red  

  •  7 high-gloss colours

Best buy turntable with maximum simplicity, outstanding sound quality & USB recording capability!

Pro-Ject has decided to go after the cheap plastic turntable market with an high quality alternative that comes complete with an Ortofon cartridge. The new Elemental Phono USB table is a real "plug'n'play" all the way. No adjustment of counterweight and antiskating is needed, because both are pre-adjusted. This new straight tonearm is optimised for Ortofon OM cartridge series. All the buyer needs to do is remove it from the box, remove bearing guard, locate the belt around the platter, remove stylus guard and plug it into hifi system and computer.

The only plastic here is the stylus guard!

The hidden secret to the new table's sonic success, is a central gravity mass point, made from artificial stone and placed directly underneath the platter bearing. It is capable to fully absorb unwanted rumble and motor vibration. This turntable appears to be pure simplicity itself, while maintaining high quality audio standards and vinyl recording capability.

• Belt drive system
• Integrated motor control with DC power supply secures silent running
• Central gravity mass point made from artificial stone
• Main platter bearing made from stainless steel runs in bronze bushing with Teflon bottom
• Low resonance MDF platter with felt mat
• 8,6” ultra low mass tonearm with straight arm tube
• Pre-adjusted tracking force & antiskating
• Gold-plated RCA contacts & cartridge pins
• Integrated phono stage with precise RIAA equalisation
• Line level output
• A/D converter for vinyl recording with USB B output

• Colour options: red-black, white-black, silver-black

The TD 158 is a complete and comfortable record player. Plug-and-play, so to speak. It goes without saying that it features a fully automatic mode of operation, an electronic speed selector and last but not least, a high-quality acrylic cover to keep dust away.

 Tonearm and cartridge have been pre-mounted and painstakingly adjusted in the factory. All necessary leads are supplied with the unit and the record player is ready to play with a flick of the wrist. The entry into the wonderful world of analog music is as simple as this!

 

Fully automatic, internal flat drive belt,
Speeds 33-1/3, 45 rpm,  Tonearm THORENS TP 17,  Pick-up Cartridge DN 251 S,
Dimensions  440 x 120 x 360 mm (W x H x D), 
Finish black structured enamel ,mains adapter, dust cover (acrylic), RCA interconnects

 

High-quality materials, a classic design and love for details are the distinctive characteristics of this fully automatic record player. The massive and stable real wood plinth, which is available also with piano lacquer finish, provides the TD 240-2 with a timeless elegance.

This record player has been equipped with the new TP 19-1 tonearm and an extremely silent running precision belt drive beneath the platter, so that the other technical qualities are also most evident. Set-up and connections are effortlessly carried out so that the TD 240 is ready to play within minutes

Specs:

  • Operation fully automatic
  • Drive System internal flat drive belt
  • Motor electronically controlled DC motor
  • Speeds 33-1/3, 45, 78 rpm
  • Speed Select electronically
  • Platter 12” / 0.7 kg (aluminium, non-magnetic)
  • Tonearm THORENS® TP 19-1
  • Pick-up Cartridge THORENS® TAS 267
  • Anti-skating (Bias) by spring (adjustable)
  • Automatic Shut-off mechanically
  • Cable Capacitance 160 pF
  • Power Supply external mains adaptor (115-230 V / 50-60 Hz depending on type)
  • Dimensions 430 x 130 x 365 mm (W x H x D)
  • Weight 6.4 kg
  • Finish solid wooden plinth with black piano laquer, black structured enamel,
  • Scope of Delivery mains adapter, dust cover (acrylic), RCA interconnects, operating instructions
Weight4.00 kg5.00 kg6.50 kg3.50 kg4.00 kg9.00 kg
DimensionsN/AN/AN/AN/AN/AN/A
Additional information
Weight 4.00 kg
Weight 5.00 kg
Weight 6.50 kg
Weight 3.50 kg
Weight 4.00 kg
Weight 9.00 kg