THORENS TD 201 Belt drive Turntable (White hg)

565.00 incl. GR VAT

In stock

EAN: N/A
Installments calculation
CompareAdd to wishlist Submit Better Price
Availability: Available in 1-3 d. Available in 1-3 d. SKU: TD 201 WHITE HG Category:
The new Thorens TD 201 is the right choice for anyone looking for a robust, easy to use plug and play turntable. It comes with a smooth running belt drive and a aluminium platter with rubber mat. The new Thorens TP 71 tonearm uses a detachable headshell with preconfigured AT 3600 cartridge. SPECIAL FEATURES Using […]

 

Read more

The new Thorens TD 201 is the right choice for anyone looking for a robust, easy to use plug and play turntable. It comes with a smooth running belt drive and a aluminium platter with rubber mat. The new Thorens TP 71 tonearm uses a detachable headshell with preconfigured AT 3600 cartridge.

SPECIAL FEATURES

Using the switchable integrated phono stage the TD 201 can be connected to any amplifier or receiver even if it does not have a specific input for phono devices.

TD 201 Specification

Turntable section

Drive System Belt Drive

Motor DC Motor

Speed 33 1/3 RPM, 45 RPM

Rotation Speed Variation +/–2%

Wow and Flutter 0.2%

Signal-to-Noise Ratio 67dB or higher (A-weighted, 20kHz LPF) 60dB or higher (unweighted, 20kHz LPF)

Platter Aluminum Die-cast Diameter of Platter 12“, 300mm

Tonearm section Alumi tube

Type Static Balance, Straight

Effective Arm Length 8.8“, 223.6mm

Stylus Pressure Range 0 to 4g

Supported Cartridge Weight 3.5 to 6.0g

Overhang 18.6mm

Anti-skating Adjustment Supported

Cartridge section

Type MM type (Audio-Technica AT3600)

Stylus Construction Bonded Diamond

Frequency Response 20Hz to 20kHz

Channel Separation >18dB Channel Balance 2.5dB

Vertical Tracking Angle 20 degrees

Supported Load Impedance 47k ohms

Output Voltage 2.5mV (1kHz, 3.54cm/sec.)

Stylus Pressure 3.5g +/–0.5g

Cartridge Weight 5g +/–0.5g

Head-shell Weight 10g (including Screws, Nuts and Wires)

Analog Output

Connector RCA Pin jack (Gold-plated)

Power AC 100 to 240V, 50/60Hz Power Consumption 1.5W (less than 0.5W at Standby)

Overall Dimensions (W x H x D) 420 x 355x 121mm

Weight Approx. 3.9 kg

Weight 4.00 kg

Reviews

There are no reviews yet.

Be the first to review “THORENS TD 201 Belt drive Turntable (White hg)”

Your email address will not be published. Required fields are marked *

Quick Comparison

THORENS TD 201 Belt drive Turntable (White hg) removeDUAL CS 455-1 Black/Silver EV Phono Pre amp BELT DRIVE Turntable removePro-Ject Elemental Turntable Red-Black with Ortofon OM 5 E removeJB Systems Q1-USB TURNTABLE 33-45 RPM DRIVE BELT removePro-Ject Elemental Turntable White-Black with Ortofon OM 5 E removeDENON DP-200 USB Fully Automatic Record Player SILVER remove
NameTHORENS TD 201 Belt drive Turntable (White hg) removeDUAL CS 455-1 Black/Silver EV Phono Pre amp BELT DRIVE Turntable removePro-Ject Elemental Turntable Red-Black with Ortofon OM 5 E removeJB Systems Q1-USB TURNTABLE 33-45 RPM DRIVE BELT removePro-Ject Elemental Turntable White-Black with Ortofon OM 5 E removeDENON DP-200 USB Fully Automatic Record Player SILVER remove
Imagecs455-1 silver e phono preamp turntable dual
SKUTD 201 WHITE HGCS 455-1ELEMENTALRB120046ELEMENTALWBDP-200USBS
Rating
Price565.00 incl. GR VAT 500.00 incl. GR VAT268.99 incl. GR VAT233.88 incl. GR VAT269.00 incl. GR VAT310.47 incl. GR VAT
Stock

In stock

Available on backorder

Available on backorder

Available on backorder

Only 1 left in stock (can be backordered)

In stock

AvailabilityIn stockAvailable on backorderAvailable on backorderAvailable on backorderOnly 1 left in stock (can be backordered)In stock
Add to cart

Add to cart

Add to cart

Add to cart

Add to cart

Add to cart

Add to cart

Description
ContentThe new Thorens TD 201 is the right choice for anyone looking for a robust, easy to use plug and play turntable. It comes with a smooth running belt drive and a aluminium platter with rubber mat. The new Thorens TP 71 tonearm uses a detachable headshell with preconfigured AT 3600 cartridge. SPECIAL FEATURES Using the switchable integrated phono stage the TD 201 can be connected to any amplifier or receiver even if it does not have a specific input for phono devices. TD 201 Specification Turntable section Drive System Belt Drive Motor DC Motor Speed 33 1/3 RPM, 45 RPM Rotation Speed Variation +/–2% Wow and Flutter 0.2% Signal-to-Noise Ratio 67dB or higher (A-weighted, 20kHz LPF) 60dB or higher (unweighted, 20kHz LPF) Platter Aluminum Die-cast Diameter of Platter 12“, 300mm Tonearm section Alumi tube Type Static Balance, Straight Effective Arm Length 8.8“, 223.6mm Stylus Pressure Range 0 to 4g Supported Cartridge Weight 3.5 to 6.0g Overhang 18.6mm Anti-skating Adjustment Supported Cartridge section Type MM type (Audio-Technica AT3600) Stylus Construction Bonded Diamond Frequency Response 20Hz to 20kHz Channel Separation >18dB Channel Balance 2.5dB Vertical Tracking Angle 20 degrees Supported Load Impedance 47k ohms Output Voltage 2.5mV (1kHz, 3.54cm/sec.) Stylus Pressure 3.5g +/–0.5g Cartridge Weight 5g +/–0.5g Head-shell Weight 10g (including Screws, Nuts and Wires) Analog Output Connector RCA Pin jack (Gold-plated) Power AC 100 to 240V, 50/60Hz Power Consumption 1.5W (less than 0.5W at Standby) Overall Dimensions (W x H x D) 420 x 355x 121mm Weight Approx. 3.9 kgCardan bearing with zero-mass tracking force setting by a high-precision torsion spring. Removable headshell with 1/2 inch fixing holes. Adjustable tracking force and anti-skating. Headshell made of carbon fiber for special rigid torsion. Chassis technology Solid wooden console. Floating sub-chassis.Vibration -damped aluminum turntables with anti-static felt mat. Drive technology Belt drive with smooth flat belt. DC motor with electronic rotary speed control. Viscosity-damped tone arm lift. Automatic tone-arm cueing mechanism. Auto stop with ton arm return. Possibilities to play-back archived discs with a rotational speed of 78 Upm. Delivered with magnetic pick-up OMB 10.
High quality, fully automatic turntable with three speeds (33, 45, 78 rpm). This turntable meets all the criteria. Sophisticated technology, greatest convenience combined with great sound leaves the listener with no unfulfilled wishes. Tone arm technology: Cardan bearing with zero-mass tracking force setting, thanks to precision torsion spring. Detachable headshell with 13mm (1/2-inch) fixing-holes. Adjustable tracking force and anti-skating. Extremely rigid headshell made of carbon fiber. Chassis technology: Solid wooden chassis. Floating sub chassis. Vibration damping aluminium platter with antistatic felt mat. Drive technology: Belt drive with polished flat belt. DC motor with electronic speed control. Viscosity-damped arm lift. Automatic tone arm cue. Auto Stop with tone arm return. Playback option for archive disks with 78 rpm speed. Delivered with OMB 10 cartridge. Specifications:
  • Speed r/min.: 33/45/78
  • Speed a ccuracy in% DIN / WRMS: < -/+ 0,07 / 0,04 % DIN
  • Rumble-to-noise ratio: 48 dB
  • Rumble-noise ratio: 72 dB
  • Cartridge system: OMB 10
  • Frequency Response: 20 Hz - 22 kHz
  • Depth sensing capability (300 Hz): 70 µm at 315 Hz
  • Dimensions (WxHxD): 440 x 119 x 360 mm
  • Weight: 5,43 kg
  • Colour: black / silver
  • Power supply: 12V DC, 150 mA
Pro-Ject has decided to go after the cheap plastic turntable market with an high quality alternative that comes complete with an Ortofon cartridge. The new Elemental table is a real "plug'n'play" all the way. No adjustment of counterweight and antiskating is needed, because both are pre-adjusted. This new straight ultra low mass tonearm is optimised for Ortofon OM cartridge series. All the buyer needs to do is remove it from the box, remove bearing guard, locate the belt around the platter, remove stylus guard and plug it in. The only plastic here is the stylus guard. The hidden secret to the new table's sonic success, is a central gravity mass point, made from artificial stone and placed directly underneath the platter bearing. It is capable to fully absorb unwanted rumble and motor vibration. This turntable appears to be pure simplicity itself, while maintaining high quality audio standards. The hidden secret to the new table's sonic success, is a central gravity mass point, made from artificial stone and placed directly underneath the platter bearing. It is capable to fully absorb unwanted rumble and motor vibration. This turntable appears to be pure simplicity itself, while maintaining high quality audio standards.
  •  Belt drive system with low vibration DC motor
  •  Central gravity mass point made from artificial stone
  •  Main platter bearing made from stainless steel runs in bronze bushing with Teflon bottom
  •  Low resonance MDF platter with felt mat
  •  8,6” ultra low mass tonearm with straight arm tube
  •  Pre-adjusted tracking force & antiskating
  •  Gold-plated RCA contacts & cartridge pins
  •  Colour options: red-black, white-black, silver-black
Specifications:
  • speed : 33, 45 (manual speed change)
  • Speed variance: 33: 0,2% 45: 0,18%
  • Wow & flutter: 33: 0,14% 45: 0,13%
  • platter: 300mm MDF
  • tonearm: 8,6” metal tube
  • effective arm length: 218,5 mm
  • overhang: 22,0 mm
  • effective tonearmmass: 8,0gr
  • counterweight for cartridge mass: 3 - 5,5g (included)
  • tracking force range: 0 - 30mn (OM5 18mn pre-adjusted)
  • output: RCA to phono input
  • included accessory: RCA cable, 15V DC power supply
  • power consumption: 4,0 watts
  • dimensions: 430 x 90 x 300mm (WxHxD)
  • weight: 2,7 kg net

Specifications

Item name: Turntable
Item code: Q1-USB
Brand:JBSYSTEMS

Brief Introduction

1.Plastic dust cover
2.USB-output for direct recording to any PC
3.Belt Drive 2 speed

:: Product Description

     *  Middle Torque belt drive motor
     *  Fast start / stop
     *  2 speeds: 33, 45 rpm
     *  +/-10% Pitch adjustment range
     *  USB-output for direct recording to any PC
     *  Free, multilingual Audacity software available via download:
     *  - Endless possibilities with free downloadable effect plug-ins
     *  - Import, export and edit Ogg Vorbis, MP3, AIFF and WAV sound files.
     *  - Cut, copy, splice, and mix sounds together.
     *  - Change the speed or pitch of a recording.
     *  - Remove static, hiss, hum, or other constant background noises.
     *  - Alter frequencies with Equalization, FFT Filter, and Bass Boost effects.
     *  - Adjust volumes with Compressor, Amplify, and Normalize effects.
     *  - Many more…
     *  Selectable phono/line output
     *  All functions are equipped with stylish, blue LED lights
     *  Plastic dust cover
     *  Retractable target light
     * Audio Technica cartridge included
     * All metal S-shaped tone arm assembly with:
     *  - Counterweight    * - Anti-skating adjustment
     * - Lever lift with height adjustment
     * Adjustable large feet for perfect leveling

:: Technical Information

     * Motor: DC motor
     * Driving Method: Belt Drive
     * Starting Time: less than 1 second
     * Braking Time: less than 1 second
     * Speed selection: 331/3 ~ 45 RPM
     * Speed adjustment: +/-10%
     * Wow & Flutter: less than 0,25% WRMS (JIS WTD) @ 331/3 RPM
     * Tone arm type: Static balanced S-shaped tone arm.
     * Tracking Error angle: Less than 3°
     * Cartridge weight: 3,5~8,5g.
     * Anti-skate range: 0~7g.
     * Phono output: 1,5 ~ 3,6mV @ 1kHz 5cm/sec (with supplied AT HP-4005 cartridge)
     * Line output: 90 ~ 216mV @ 1kHz 5cm/sec (with supplied AT HP-4005 cartridge)
     * Computer interface USB 1.1 compliant (Windows(R) XP/Vista/Win7 or Mac(R) OS X)
     * Power supply: 230V~ 50Hz.
     * Power consumption: 14Watts
     * Dimensions: 450 x 350 x 150mm (WxDxH)
     * Weight : 9,0kg.

Pro-Ject has decided to go after the cheap plastic turntable market with an high quality alternative that comes complete with an Ortofon cartridge. The new Elemental table is a real "plug'n'play" all the way. No adjustment of counterweight and antiskating is needed, because both are pre-adjusted. This new straight ultra low mass tonearm is optimised for Ortofon OM cartridge series. All the buyer needs to do is remove it from the box, remove bearing guard, locate the belt around the platter, remove stylus guard and plug it in.  

The only plastic here is the stylus guard. The hidden secret to the new table's sonic success, is a central gravity mass point, made from artificial stone and placed directly underneath the platter bearing. It is capable to fully absorb unwanted rumble and motor vibration. This turntable appears to be pure simplicity itself, while maintaining high quality audio standards.

The hidden secret to the new table's sonic success, is a central gravity mass point, made from artificial stone and placed directly underneath the platter bearing. It is capable to fully absorb unwanted rumble and motor vibration. This turntable appears to be pure simplicity itself, while maintaining high quality audio standards. 

  •  Belt drive system with low vibration DC motor  

  •  Central gravity mass point made from artificial stone  

  •  Main platter bearing made from stainless steel runs in bronze bushing with Teflon bottom  

  •  Low resonance MDF platter with felt mat  

  •  8,6” ultra low mass tonearm with straight arm tube  

  •  Pre-adjusted tracking force & antiskating  

  •  Gold-plated RCA contacts & cartridge pins  

  •  Colour options: red-black, white-black, silver-black 

Specifications:

  • speed : 33, 45 (manual speed change)

  • Speed variance: 33: 0,2% 45: 0,18%

  • Wow & flutter: 33: 0,14% 45: 0,13%

  • platter: 300mm MDF

  • tonearm: 8,6” metal tube

  • effective arm length: 218,5 mm

  • overhang: 22,0 mm

  • effective tonearmmass: 8,0gr

  • counterweight for cartridge mass: 3 - 5,5g (included)

  • tracking force range: 0 - 30mn (OM5 18mn pre-adjusted)

  • output: RCA to phono input

  • included accessory: RCA cable, 15V DC power supply

  • power consumption: 4,0 watts

  • dimensions: 430 x 90 x 300mm (WxHxD)

  • weight: 2,7 kg net

• High precision turntable with cast aluminum plate
• Fully automatic system for easy operation
• Built-in equalizer for connection to PHONO input
• Transfer music from analog LP to USB memory (without PC)
• Includes PC software for assembling tracks

The DP-200USB is a fully automatic record player that easily converts your analogue records into digital files and stores them onto a USB memory stick. Using USB memory makes it easy to carry your digital files when you donʼt have a PC near your record player. 
 Easily store your record library onto USB memory: Simply insert your USB memory stick into the USB port on the front, press the Start and Record buttons, and the DP-200USB converts your record into digital files. You don\'t need to have a PC nearby. When you insert the USB memory stick into a DENON S-52DAB or RCD-M37DAB, you can enjoy the music files in the high-quality sound that Denon audio products are renowned for. You can also record the music to a USB player that supports MP3 files and enjoy listening to the music directly from the player. 
 Includes Trans Music Manager, to obtain track numbers and information: The DP-200USB comes with Trans Music Manager (on CD-ROM) that detects the silent spaces between tracks to automatically split track numbers. You can also use a PC to access the Gracenote® music ID server and obtain track information. 
 Built-in Phono Equalizer: The DP-200USBʼs built-in Phono Equalizer lets you enjoy the music on a mini audio system or radio cassette player that does not have a PHONO jack. (The Phono Equalizer can be switched on or off.) 
 Fully automatic player: When you select the 30cm (12“) or 17cm (7“) record size, the arm automatically moves to the correct position for playing the record, and after itʼs finished, the arm automatically returns to its original position. This automatic system makes it easy to play records on the DP-200USB. 
 Aluminium diecast turntable: The DP-200USB has an aluminium diecast turntable for high inertial mass and stable rotation. 
 Includes MM cartridge 
 Trans Music Manager functions: Auto MP3 Splitter: Detects silent part between tracks and automatically tags tracks / Manual MP3 Splitter: Manually tags tracks as you wish / Auto Music ID Record: automatically enables to record music information including titles / Manual MusicID Record: manually enables to record music information including titles / Required System OS; Microsoft® Windows® Vista/XP/2000 / Language: ENGLISH, GERMAN, FRENCH 
 Color variations: Silver and Black 
 Drive system: Belt Drive Motor 
 Motor: DC Servo Motor 
 Speed: 33-1/3, 45 rpm 
 Wow & flutter: 0.15 % (WRMS) 
 Tonearm: Type Dynamically Balance type, Straight Tonearm 
 Cartridge: Type MM / Replaceable stylus number DSN-84 / Output Voltage with equalizer OFF 2.5 mV, with equalizer ON 150 mV 
 Digital recording media: USB memory (Mass Storage Class) 
 Digital recording file type: MP3, 192 kbps 
 Power supply: AC 230 V, 50 Hz 
 Power consumption: 12 W 
 Dimensions (WxHxD): Dust cover closed 360 x 98 x 358 mm / Max., Dust cover opened 360 x 415 x 363 mm 
 Weight: 3.2 kg

Weight4.00 kg6.00 kg3.50 kg9.00 kg3.50 kg4.00 kg
DimensionsN/AN/AN/AN/AN/AN/A
Additional information
Weight 4.00 kg
Weight 6.00 kg
Weight 3.50 kg
Weight 9.00 kg
Weight 3.50 kg
Weight 4.00 kg