| Content |
THORENS MM-FLEX
The Thorens MM-Flex phono preamp is a high-quality preamplifier with portability in mind. Attach it to any surface with the included velcro adhesive—and better yet, due to its size you can take it with you! The Thorens MM-Flex is ideal for the on the go audiofile who may find themselves in a warehouse, surrounded by a particularly large sound system...for whatever reason.
MM-FLEX FEATURES
- Compact MM phono preamplifier
- Attaches to rear of turntable with integrated Velcro strip
- Can be easily removed and re-fitted without irreversible modification
|
BLACK
Bandwidth 5Hz to 90kHz, -3dB Maximum output
voltage 8.5Vrms (47 kOhm load)
Overall gain 40dB-60dB @ 1kHz selectable with
dip- switch.
Input Impedance 29 Ohm - 100 kOhm selectable
with dip-switch.Selectable input Capacitance.
Input Unbalanced 1 pair x channel (RCA)WBT
Output Unbalanced(RCA)WBT - MM,
high output
MC, low output MC.
Handmade Litz cable for this specific application
from White Gold. JFET differential built around Toshiba 2SK170 among the most noiseless transistor of the current production.
| User's manual
- Ultra compact phono preamplifier and equalizer
- Proper RIAA equalization
- RCA inputs and outputs
- 6.3 mm stereo headphone output connector
- Sturdy metal housing
- 12 V AC/DC adapter included
The LD Systems PPA 2 is a very compact analogue phono preamplifier, which equalises the extremely low output signal of conventional turntables to RIAA standards. It allows you to connect to devices without any phono input, such as mixers, PA power amplifiers or sound cards. The phono inputs are designed as RCA jacks, just like the line outputs; the PPA 2 also has a screw terminal for the ground conductor of the turntable and a 6.3 mm stereo jack for connecting a headset. The THD factor of the preamplifier is below 0.05% and the channel separation is -75 dB. The LD Systems PPA 2 uses a 12 V AC adapter; a bright LED indicates the power supply on the top of the sturdy metal chassis.
Product type
Other Studio and Recording Equipment
Type
Stereo Input / Stereo Output
Frequency response
RIAA Curve Hz
Signal-to-noise ratio
70 dB
THD |
- Input impedance : 47kohms
- Input capacitance : 120pF
- Gain : 40dB
- Output voltage(typically) : 500mV @ 1KhZ with 5mV input
- Noise floor : 88dB (A weighted)
- THD :
|
Azur 851C Upsampling DAC, CD Player and Digital Pre-amplifier Features
Digital to Analogue Converter featuring S/PDIF and Toslink digital inputs, AES/EBU balanced digital input and USB audio inputs (all 24 bit compatible)
CD playback
Optional digital volume and channel balance control
Balanced XLR and unbalanced RCA analogue audio outputs
USB Audio input allowing streaming of up to 24-bit/192kHz audio from computer
ATF2™ audio up-sampling to 24-bit/384kHz
Twin Analog Devices AD1955 24 bit DACs delivering superior sound-staging and stereo imaging
Selectable digital filters – linear phase, minimum phase, steep
Audiophile grade toroidal transformer delivering ultra-low low noise and distortion
Full metal casework design with thick brushed aluminium front panel and dual layer damped feet, giving enhanced resonance control
RS232 controllable
Eco-friendly Azur Navigator remote control with Cambridge Audio amplifier and iPod dock control
Available in black and silver finishes
|
Thorens MM 002 moving-magnet phono preamplifier.
Specifications:
- Mode: Moving Magnet (MM)
- Gain at 1 kHz: 40 dB
- Cartridge matching (input impedance): 47 kOhms + 220 pF fixed
- Frequency response: 10 Hz - 50 kHz (-3 dB)
- RIAA curve accuracy: ±0.3 dB max.
- THD+N: 86 dB
- Crosstalk: ≧40 dB
- Input sensitivity: 3.14 mVrms for -10 dBV output (316 mVrms)
- Max. output voltage: 498 mVrms at 5 mVrms input (1 kHz)
- Output impedance: 47 Ohms
- Input connections: 1 pair of RCA sockets (left/right)
- Output connections: 1 pair of RCA sockets (left/right)
- Power supply: 24 V DC / 630 mA
- Power consumption: 3.3 W / 15 mA
- Weight: 292 g (not including power supply)
- Dimensions (W x H x D): 100 x 45 x 93 mm
|
Reviews
There are no reviews yet.