| Content |
WITH INTEGRATED ANALOGUE-TO-DIGITAL CONVERTER
Both Microsoft® Windows® and Apple® Mac OS® come with very simple audio recording software pre-installed. However, to take full advantage of the high-resolution recording facilities offered by the MM 008 ADC, we recommend recording software that can record at 24 bits/96 kHz and save lossless high-resolution audio files such as FLAC or Apple® Lossless.
ADC SOFTWARE
Thorens turntables can be considered state-of-the-art in hi-fi technology as they would extract even the most minute details from your precious vinyl records. The signals generated by the pickup cartridges are however very small and therefore must be amplified to a much higher level. Regrettably, most of today’s amplifiers are no longer equipped with a dedicated phono stage. This unfortunate situation was a good reason for Thorens to develop the TEP 302, a complete phono preamplifier including RIAA equalization, which was to complement the outstanding playback performance of our turntables.
The TEP 302 is a pure-bred Class-A amplifier which employs selected, very special low-noise operational amplifiers throughout. The circuitry has been optimized "by ear” after several extended listening sessions. Of course, the TEP 302 also features a 15-Hz subsonic filter in order to protect the woofers from dangerous excursions when a warped record is played. More details, more dynamics.
- Mode: MM/MC (switchable)
- Gain at 1 kHz: 40 dB (MM)/60 dB (MC)
- Input impedance (MM): 47 kΩ + 220 pF fixed
- Input impedance (MC): 47 kΩ + 1 nF (modifiable with external load plugs)
- Frequency response (flat): 20 Hz - 20 kHz ±0.3 dB
- Frequency response (-3 dB): 10 Hz - 50 kHz
- RIAA curve accuracy: ±0.3 dB
- THD+N: 72 dB (MC)
- Crosstalk: ≧40 dB
- Input sensitivity (MM): 3.29 mVrms for -10 dBV output (316 mVrms)
- Input sensitivity (MC): 0.325 mVrms for -10 dBV output (316 mVrms)
- Max. output voltage: 482 mVrms at 5 mVrms input (1 kHz)
- Output impedance: 47 Ω
- Input connections: 3 pairs of RCA sockets (left/right)
- Output connections: 1 pair of RCA sockets (left/right)
- Power supply: 24 V DC
- Power consumption: 3.5 W/15 mA
- Weight: 511 g (not including power supply)
- Dimensions (W x H x D): 150 x 50 x 117 mm
- A/D converter: Tenor TE7022L 24Bit Delta Sigma
- Sampling rates: 8,16, 32, 44.1, 48, 96 kHz
- USB output: USB 2.0, fully backward-compatible with USB 1.1
- Operating systems: Windows® 8, Windows® 7, Vista, XP, Mac OS®
|
SILVER
Bandwidth 5Hz to 90kHz, -3dB Maximum output
voltage 8.5Vrms (47 kOhm load)
Overall gain 40dB-60dB @ 1kHz selectable with
dip- switch.
Input Impedance 29 Ohm - 100 kOhm selectable
with dip-switch.Selectable input Capacitance.
Input Unbalanced 1 pair x channel (RCA)WBT
Output Unbalanced(RCA)WBT - MM,
high output
MC, low output MC.
Handmade Litz cable for this specific application
from White Gold. JFET differential built around Toshiba 2SK170 among the most noiseless transistor of the current production.
|
Both Microsoft® Windows® and Apple® Mac OS® come with very simple audio recording software pre-installed. However, to take full advantage of the high-resolution recording facilities offered by the MM 008 ADC, we recommend recording software that can record at 24 bits/96 kHz and save lossless high-resolution audio files such as FLAC or Apple® Lossless.
Specs:
- Mode: MM/MC (switchable)
- Gain at 1 kHz: 40 dB (MM)/60 dB (MC)
- Input impedance (MM): 47 kΩ + 220 pF fixed
- Input impedance (MC): 47 kΩ + 1 nF (modifiable with external load plugs)
- Frequency response (flat): 20 Hz - 20 kHz ±0.3 dB
- Frequency response (-3 dB): 10 Hz - 50 kHz
- RIAA curve accuracy: ±0.3 dB
- THD+N: 72 dB (MC)
- Crosstalk: ≧40 dB
- Input sensitivity (MM): 3.29 mVrms for -10 dBV output (316 mVrms)
- Input sensitivity (MC): 0.325 mVrms for -10 dBV output (316 mVrms)
- Max. output voltage: 482 mVrms at 5 mVrms input (1 kHz)
- Output impedance: 47 Ω
- Input connections: 3 pairs of RCA sockets (left/right)
- Output connections: 1 pair of RCA sockets (left/right)
- Power supply: 24 V DC
- Power consumption: 3.4 W/15 mA
- Weight: 504 g (not including power supply)
- Dimensions: (W x H x D): 150 x 50 x 117 mm
| User's manual
- Ultra compact phono preamplifier and equalizer
- Proper RIAA equalization
- RCA inputs and outputs
- 6.3 mm stereo headphone output connector
- Sturdy metal housing
- 12 V AC/DC adapter included
The LD Systems PPA 2 is a very compact analogue phono preamplifier, which equalises the extremely low output signal of conventional turntables to RIAA standards. It allows you to connect to devices without any phono input, such as mixers, PA power amplifiers or sound cards. The phono inputs are designed as RCA jacks, just like the line outputs; the PPA 2 also has a screw terminal for the ground conductor of the turntable and a 6.3 mm stereo jack for connecting a headset. The THD factor of the preamplifier is below 0.05% and the channel separation is -75 dB. The LD Systems PPA 2 uses a 12 V AC adapter; a bright LED indicates the power supply on the top of the sturdy metal chassis.
Product type
Other Studio and Recording Equipment
Type
Stereo Input / Stereo Output
Frequency response
RIAA Curve Hz
Signal-to-noise ratio
70 dB
THD |
Backed by the combined technological prowess of multiple HARMAN brands, the JBL Commercial Series Mixers (CSM) deliver unsurpassed quality in commercial sound. Easily configured for a range of applications, such as background music, security, and paging, CSM units are designed for everything from schools and hospitals to restaurants and fitness facilities. They feature RJ45 connectors for use with JBLCSR-V in-wall volume controls, and a universal power supply that accepts AC voltages from 100 to 240 VAC, 50/60 Hz. Plus, theyʼre built using HARMANʼs GreenEdge clean standards to offer numerous energy-efficient benefits, including a lighter weight, space-saving design, and conforming to RoHS standards. 4 or 8 inputs with 1 or 2 channel outputs Fanless, space-saving 1U design Independent base/treble controls Euro-block type mic/line input and output connectors, and unbalanced RCA inputs for consumer connection Sleek industrial look with illuminated rings making them easy to see and use Configurable output routing (2 channel models only) Supports JBL CSR-V wall controller via Ethernet cable Priority muting, VOX ducking, and phantom power for all models |
BLACK
Bandwidth 5Hz to 90kHz, -3dB Maximum output
voltage 8.5Vrms (47 kOhm load)
Overall gain 40dB-60dB @ 1kHz selectable with
dip- switch.
Input Impedance 29 Ohm - 100 kOhm selectable
with dip-switch.Selectable input Capacitance.
Input Unbalanced 1 pair x channel (RCA)WBT
Output Unbalanced(RCA)WBT - MM,
high output
MC, low output MC.
Handmade Litz cable for this specific application
from White Gold. JFET differential built around Toshiba 2SK170 among the most noiseless transistor of the current production.
|
Reviews
There are no reviews yet.