| Content |
Thorens MM 002 moving-magnet phono preamplifier.
Specifications:
- Mode: Moving Magnet (MM)
- Gain at 1 kHz: 40 dB
- Cartridge matching (input impedance): 47 kOhms + 220 pF fixed
- Frequency response: 10 Hz - 50 kHz (-3 dB)
- RIAA curve accuracy: ±0.3 dB max.
- THD+N: 86 dB
- Crosstalk: ≧40 dB
- Input sensitivity: 3.14 mVrms for -10 dBV output (316 mVrms)
- Max. output voltage: 498 mVrms at 5 mVrms input (1 kHz)
- Output impedance: 47 Ohms
- Input connections: 1 pair of RCA sockets (left/right)
- Output connections: 1 pair of RCA sockets (left/right)
- Power supply: 24 V DC / 630 mA
- Power consumption: 3.3 W / 15 mA
- Weight: 292 g (not including power supply)
- Dimensions (W x H x D): 100 x 45 x 93 mm
| The Rega Fono Mini A2D is a high quality phono pre-amplifier for use with any moving magnet cartridge. The addition of USB interface allows you to easily transfer vinyl to your PC. The Fono Mini A2D is designed to amplify the signal from a moving magnet cartridge to a suitable level for all line level inputs of an audio amplifier. The new Fono Mini A2D benefits from an extruded aluminium case and very user friendly front and back panels that make this phono pre-amplifier a very easy product to use.
The Fono Mini A2D amplifier offers exceptional performance and incredible value for money and promises to be a valuable addition to any hi-fi set up.
To transfer vinyl to your PC, you will need to install a digital audio editor. Such software is widely available as a free download (such as Audacity), from the internet. This is a simple interface which allows monitoring of volume and balance whilst transferring your audio to your PC hard drive.
Audio editing software includes a level meter which indicates the output level achieved when playing a piece of vinyl. You should adjust the output as necessary via the ‘Level’ control located on the front panel. Always take special note of record levels to ensure optimum recording quality.
This is a cost effective version of the Fono MM and based on the phono amplifier as used in the Brio-R amplifier.
Simply switch on, sit back and enjoy!
- Input sensitivity: 5mV for 500mV output
- Input loading: 47k +100pF
- Maximum input level: 70mV @ 1kHz
- Output Impedance: 100 Ohms
- Signal to noise ratio: 78dBA ref 5mV
- Power requirements: 24VAC 85mA
- Input for full scale digital output: 7.5mV
- Dimensions W 102mm x D 125mm x H 30mm
|
WITH INTEGRATED ANALOGUE-TO-DIGITAL CONVERTER
Both Microsoft® Windows® and Apple® Mac OS® come with very simple audio recording software pre-installed. However, to take full advantage of the high-resolution recording facilities offered by the MM 008 ADC, we recommend recording software that can record at 24 bits/96 kHz and save lossless high-resolution audio files such as FLAC or Apple® Lossless.
ADC SOFTWARE
Thorens turntables can be considered state-of-the-art in hi-fi technology as they would extract even the most minute details from your precious vinyl records. The signals generated by the pickup cartridges are however very small and therefore must be amplified to a much higher level. Regrettably, most of today’s amplifiers are no longer equipped with a dedicated phono stage. This unfortunate situation was a good reason for Thorens to develop the TEP 302, a complete phono preamplifier including RIAA equalization, which was to complement the outstanding playback performance of our turntables.
The TEP 302 is a pure-bred Class-A amplifier which employs selected, very special low-noise operational amplifiers throughout. The circuitry has been optimized "by ear” after several extended listening sessions. Of course, the TEP 302 also features a 15-Hz subsonic filter in order to protect the woofers from dangerous excursions when a warped record is played. More details, more dynamics.
- Mode: MM/MC (switchable)
- Gain at 1 kHz: 40 dB (MM)/60 dB (MC)
- Input impedance (MM): 47 kΩ + 220 pF fixed
- Input impedance (MC): 47 kΩ + 1 nF (modifiable with external load plugs)
- Frequency response (flat): 20 Hz - 20 kHz ±0.3 dB
- Frequency response (-3 dB): 10 Hz - 50 kHz
- RIAA curve accuracy: ±0.3 dB
- THD+N: 72 dB (MC)
- Crosstalk: ≧40 dB
- Input sensitivity (MM): 3.29 mVrms for -10 dBV output (316 mVrms)
- Input sensitivity (MC): 0.325 mVrms for -10 dBV output (316 mVrms)
- Max. output voltage: 482 mVrms at 5 mVrms input (1 kHz)
- Output impedance: 47 Ω
- Input connections: 3 pairs of RCA sockets (left/right)
- Output connections: 1 pair of RCA sockets (left/right)
- Power supply: 24 V DC
- Power consumption: 3.5 W/15 mA
- Weight: 511 g (not including power supply)
- Dimensions (W x H x D): 150 x 50 x 117 mm
- A/D converter: Tenor TE7022L 24Bit Delta Sigma
- Sampling rates: 8,16, 32, 44.1, 48, 96 kHz
- USB output: USB 2.0, fully backward-compatible with USB 1.1
- Operating systems: Windows® 8, Windows® 7, Vista, XP, Mac OS®
|
• MM & MC capable
• True dual mono design
• Balanced XLR & unbalanced RCA In & Outputs
• Fully passive RIAA & DECCA equalisation
• Unique continously variable input impedance loading,
matches every cartridge (adjustment even while playing)
• RCA & XLR In & Out
• Superior low noise / low distortion
• Classy & elegant dip switches
• DC power supply (
• Metal casing protects against vibration and interference
• Faceplate silver or black
| Technical data | Pro-Ject Phono Box RS | | Input impedance | Fixed 10 ohms or 47kohms, | | | variable 10 - 1200 ohms | | Load capacity switchable | 100pF 200pF, 300pF, 420pF, 520pF | | Output impedance | 50 ohms | | Gain, MM / MC | RCA: 40, 50, 60 dB | | | XLR: 46, 56, 66 dB | | Signal to noise ratio | 80dB (91dB - IEC -A) | | THD | | | RIAA accuracy | within 0,3dB/20Hz - 20kHz | | SubsonIc | 20Hz / - 12dB | | Input | RCA & XLR | | Output | RCA & XLR | | Power supply | +2x 18V/300mA DC; 220 - 240V, 50Hz | | Power consumption | 150mA DC | | dimensions W x H x D (T with sockets) | 206 x 72 x 200 (210)mm | | |
2000g without power supply
|
Manual/Εγχειρίδιο
| The PM7400MKII is a very easy to operate stereo pre-amplifier that is suitable for many applications like clubs, bars, restaurants, fitness, audiovisual, ... | User's manual
- Ultra compact phono preamplifier and equalizer
- Proper RIAA equalization
- RCA inputs and outputs
- 6.3 mm stereo headphone output connector
- Sturdy metal housing
- 12 V AC/DC adapter included
The LD Systems PPA 2 is a very compact analogue phono preamplifier, which equalises the extremely low output signal of conventional turntables to RIAA standards. It allows you to connect to devices without any phono input, such as mixers, PA power amplifiers or sound cards. The phono inputs are designed as RCA jacks, just like the line outputs; the PPA 2 also has a screw terminal for the ground conductor of the turntable and a 6.3 mm stereo jack for connecting a headset. The THD factor of the preamplifier is below 0.05% and the channel separation is -75 dB. The LD Systems PPA 2 uses a 12 V AC adapter; a bright LED indicates the power supply on the top of the sturdy metal chassis.
Product type
Other Studio and Recording Equipment
Type
Stereo Input / Stereo Output
Frequency response
RIAA Curve Hz
Signal-to-noise ratio
70 dB
THD |
Reviews
There are no reviews yet.