| Content |
The BS-634 and BS-634T are wall-mount speakers matched with a supplied plug-in speaker receptacle, for easy installation. The 6W
rated input BS-634/634T are 5" (12cm) cone-type speakers. An M4 screw terminal input connector allows easy connections. The speakers are driven on a high-impedance (100V or 70V) line, with rated inputs. A selectable attenuation function is provided on the BS-634T. The speaker enclosureʼs design proportions are based on the Golden Ratio (1: 1.618). A low profile blends in well with room décor. Both vertical and horizontal installations are possible.Enclosure and grille net colour is off-white.
| BS-634 |
|
|---|
| Speaker Component: | 5" (12cm) Cone-type | | Impedance: | 100V LINE: 1.7 kΩ (6W), 3.3 kΩ (3W), | | Sensitivity: | (1w 1m) 90dB | | Frequency Responce: | 120 -20,000Hz | | Input Terminal: | Push-in terminal | | Finish: | Cabinet:HIPS resin, off white, paintable. Grille: SECC, off white, paintable | | Dimensions: | 320(W)x200(H)x85(D)mm |
|
The BS-633A/AT are wall-mount 5" (12cm) cone-type speakers with a compact and unobtrusive enclosure of ABS resin. Installation is quick and easy, and the speakers can be hook-mounted or mounted directly onto a wall. A push-type input terminal allows easy cable connections and bridge wiring. Input impedance can easily be adjusted by changing the tap position of the transformer. The BS-633AT comes with a built-in attenuator and can be connected to 2-wire and 3-wire systems. The speakers are highly cost-effective and well-suited for BGM and announcement applications.
| BS-33AT | | | Rated Input: | 6W (100V line), 3W (70V line) | | Rated Impedance: | 100V line: 1.7kΩ (6W), 3.3kΩ (3W) | | Sensitivity: | (1W, 1m): 91dB | | Frequency Response: | 120 – 15,000Hz (–20dB) | | Speaker Component: | 5" (12cm) cone-type | | Applicable Cable: | 600V vinyl-insulated cable (IV wire or HIV wire)Solid copper wire: ø0.8 – ø1.6mm (equivalent to AWG 20 – 14) 7-core twisted copper wire: 0.75 – 1.25mm2 (equivalent to AWG 18 – 16) | | Connetion: | Push-in connector (bridging terminal) | | Attenation Level: | 3W: OFF, 1 (–12dB), 2 (–6dB), 3 (0dB) 6W: OFF, 1 (–13dB), 2 (–7dB), 3 (0dB) | | Operating Temperature: | –10°C to 50°C (14°F to 122°F) | | Finish: | Case: ABS resin, off-white | | Rear bord: | Hard board | | Dimensions: | 173 (W) × 195 (H) × 101 (D) mm(6.81" × 7.68" × 3.98“) (excluding volume control) | | Wall Mounting Case front mount: | 184mm (7.24“) | | Dimensions: | Fixing hole mount: 120mm (4.72“) | | Weight: | 810g (1.79 lb) | | Accessory: | Speaker mounting screw (4 × 35 (0.16" x 1.38“)) × 2, Speaker mounting screw (4 × 16 (0.16" x 0.63“)) × 2 |
|
- 55 Hz to 15 kHz frequency range (-10 dB)
- 175 watts continuous program power capacity
- 60W, 30W, 15W, 7.5W taps at 70V
- 60W, 30W, 15W taps at 100V
- 2.8 kHz crossover frequency
- High-Impact Polystyrene (HIPS) enclosure
- Spring-loaded input terminals
- Dimensions (HxWxD): 380 mm x 280 mm x 220 mm (15 in x 11 in x 8.6in)
- Net Weight: 6.3 kg (14 lb)
|
- 100 Hz to 21 kHz frequency range (-10 dB)
- 50 watts continuous program power capacity
- 5W tap at 70V, 10W tap at 100V
- Nominal maximum output: 89 dB at 70V, 92 dB at 100V
- 3.5 kHz crossover frequency
- High-Impact Polystyrene (HIPS) enclosure
- Spring-loaded input terminals
- Dimensions (HxWxD): 193 mm x 140 mm x 111 mm (7.6 in x 5.5 in x 4.4 in)
- Net Weight: 1.8 kg (4 lb)
|
PRICE IS PER PIECE AND NOT PER PAIR!
- 70 Hz to 23 kHz frequency range (-10 dB)
- 200 watts continuous program power capacity
- 87 dB sensitivity (1W/1m)
- 100° x 100° nominal dispersion
- 60W, 30W, 15W, 7.5W taps at 70V
- 60W, 30W, 15W taps at 100V
- 8 ohms bypass
- 3 kHz crossover frequency
- High-Impact Polystyrene (HIPS) enclosure
- Video shielded for use near video monitors
- Stainless steel grille for harsh environments
- Zinc-plated screw down input terminal strip
- Available in black or white (Control 25AV-WH)
- Dimensions (HxWxD): 236 mm x 186 mm x 159 mm (9.3 in x 7.4 in x 6.3 in)
- Net Weight: 4.0 kg (9 lb)
|
FEATURES
Compact box speakers for music and voice paging distribution
Excellent sound quality
Twelve new models:
Black or white
Indoor
Outdoor (IPX4)
Low impedance (8 ohm) or 70/100V versions
Octagonal horn design for smooth coverage
Adjustable high frequency dispersion (F-2000 models)
Extruded cabinet design improves low frequency performance
Individual protection circuit on each component
Screwdriver-adjustable power taps (70/100V models)
Paintable grille and enclosure
Wall/ceiling-mount bracket included
Optional board, cluster and pole-mount brackets
OmniMount-compatible (F-2000 models only, Series 20.5CA/WA)
Optional subwoofers, model HB-1, FB-100 or FB-120
Five year warranty
F-1300 Series
LF Driver: 5” cone woofer
HF Driver: 1” dome tweeter
Crossover: 2kHz
Power Handling: 150W (cont. PGM)
50W (pink noise)
30W (70V transformer version)
Sensitivity (1W, 1m): 90dB SPL
Dispersion: 110° H x 100 ° V
F-1300B (indoor, black, 8 ohm)
F-1300W (indoor, white, 8 ohm)
F-1300BT (indoor, black, 70V)
F-1300WT (indoor, white, 70V)
F-1300BTWP (outdoor, black, 70V)
F-1300WTWP (outdoor, white, 70V)
|
Reviews
There are no reviews yet.