X-TREME AUDIO LINE ARRAY SYSTEM 24000 WATT 16XSAT + 16XSUB + 4XRACK + 8XAMP SECOND HAND

19,000.00

Only 1 left in stock

EAN: N/A
Installments calculation
CompareAdd to wishlist Submit Better Price
LINE ARRAY X-TREME AUDIO SECOND HAND 8000 WATT PRICE WITHOUT V.A.T. 23% 16 X XTMLA Satellites 16 X XTMLAS SUB 4 X XT2600 AMPLIFIER 4 X XT3400 AMPLIFIER 4 X RACK 4 X PANEL POWER DISTRIBUTER 2 Χ FLYING BAR STD-LSA CABLES CONNECTOR LINE ARRAY X-TREME AUDIO SECOND HAND 8000 WATT PRICE WITHOUT V.A.T. 23% […]

 

Read more

LINE ARRAY X-TREME AUDIO SECOND HAND 8000 WATT

PRICE WITHOUT V.A.T. 23%

16 X XTMLA Satellites

16 X XTMLAS SUB

4 X XT2600 AMPLIFIER

4 X XT3400 AMPLIFIER

4 X RACK

4 X PANEL POWER DISTRIBUTER

2 Χ FLYING BAR STD-LSA

CABLES CONNECTOR

LINE ARRAY X-TREME AUDIO SECOND HAND 8000 WATT

PRICE WITHOUT V.A.T. 23%

 

 

Mini Line Array

The ultra-compact Mini Line Array is a three-way sound system suited to theatres and live performances which offers all the advantages of “linear source” technology thanks to the advanced wave-guide horn loading.
This product line offers four models of loudspeaker systems, with an intentionally large number of applications, ranging from single speakers right through to array systems for open-air locations, all sharing the same basic requirements: mechanical and acoustic compatibility to achieve a precise directivity control. More specifically, both the bi-amplified XTMLA/A module and the active subwoofer XTMLAS/A, are equipped with a digital amplifier based on a high-tech switching technology and fitted with an internal programmable DSP (24 bit /96 kHz) that can be controlled from an external PC thanks to the XT-NET network and its managing software. The different settings of the DSP can be recalled directly by the user with no need for a PC.
The tri-amplifiable passive XTMLA model has a nominal impedance of 16 Ohm and it can be wired in parallel with other 4 loudspeaker systems of the same type to be supplied by a single outer power amplifier. The Mini Line Array system is equipped with a full range of specially designed rigging tools which allow quick and simple deployment in all the intended applications, whether ground supported or flow: the special ESAH suspension system makes setting up an entire line array so easy that it can be accomplished by only one technician. No extra rigging hardware has to be assembled – all necessary equipment is fitted into the cabinet.

The XTMLA element (and the active bi-amplified XTMLA/A one) have been designed for the main purpose of obtaining a wide horizontal and vertical coverage.
This goal has been achieved by a new wave guide for the high section which is capable of producing a 120° coverage on a horizontal plane.
By angling a single wave guide, XTMLA is able to achieve a maximum 15° angle on a vertical plane between each array module. In fact, the corners of the XTMLA’s trapezoidal enclosure have been designed to achieve a 2 x 7.5° angle when two loudspeaker systems are coupled.
Thanks to a successful coupling across the audible spectrum, XTMLA generates a coherent wave front on a wide area with very tiny variations in the frequency response and sound pressure level.
The accuracy, the transparency, the great headroom and the flexibility in the approach of the Mini Line Array system to sound reinforcement open up new horizons for the sound system design.

Mini Line Array
XTMLA
 
System configuration 3-way mini line array module
Power handling RMS 500 W
Frequency response (-3 dB) 75÷18.5k Hz
Peak SPL (@1 m) 136 dB
Coverage Angle (-6 dB) 120° horizontal
Nominal impedance (bi-amp) 16 (LF), 16 (MF+HF) Ohm
Nominal impedance (tri-amp) 16 (LF), 16 (MF), 16 (HF) Ohm
Transducers LF 1×8″ neodymium
MF 1×6“  neodymium
HF 2×1“  titanium
Input connectors 2xNL8FC Speakon
Cabinet birch plywood
Dimensions (WxHxD) 640x310x410 mm
Net weight (Kg) 20.5
Mini Line Array
XTMLAS
 
System configuration arrayable double subwoofer
Power handling RMS 1000 W
Frequency response (-3 dB) 40÷150 Hz
Peak SPL (@1 m) 134 dB
Nominal impedance 8 Ohm
Transducers LF 1×15″ neodymium
Cabinet birch plywood
Dimensions (WxHxD) 640x390x680 mm
Net weight (Kg) 40.5

Applications

Concert & touring (small-medium scale)
Central clusters, front fill, side fill, delay towers, etc…
Open-air events, public squares, etc… (small-medium scale)
Portable PA systems for musicians, bands and entertainers (medium size)
Theme parks, Circus shows
Theatres, Auditoriums, Music halls
Places of worship
Fixed installations (medium size)
Live clubs, Music pubs and other Live Performance Venues (medium-large size)
Multi-purpose venues, Recreational and cultural structures, Conference centers and Fairs
Corporate A/V events

 

Weight 999.99 kg

Reviews

There are no reviews yet.

Be the first to review “X-TREME AUDIO LINE ARRAY SYSTEM 24000 WATT 16XSAT + 16XSUB + 4XRACK + 8XAMP SECOND HAND”

Your email address will not be published. Required fields are marked *

Quick Comparison

X-TREME AUDIO LINE ARRAY SYSTEM 24000 WATT 16XSAT + 16XSUB + 4XRACK + 8XAMP SECOND HAND removeOUTLINE SUB 2x18 TOP SUB Subwoofer For Formula Stack System-2nd Hand removeOutline FORMULA STACK HIGH Loudspeaker-2nd Hand removeCELESTION HF50 T3421 TWEETER 50W 8OHM SECOND HAND removeOutline Spectra 800Wrms-4 Ohms Loudspeaker-2nd Hand removeOutline Top Sub Art Copy Sub 2x18 Subwoofer-2nd Hand remove
NameX-TREME AUDIO LINE ARRAY SYSTEM 24000 WATT 16XSAT + 16XSUB + 4XRACK + 8XAMP SECOND HAND removeOUTLINE SUB 2x18 TOP SUB Subwoofer For Formula Stack System-2nd Hand removeOutline FORMULA STACK HIGH Loudspeaker-2nd Hand removeCELESTION HF50 T3421 TWEETER 50W 8OHM SECOND HAND removeOutline Spectra 800Wrms-4 Ohms Loudspeaker-2nd Hand removeOutline Top Sub Art Copy Sub 2x18 Subwoofer-2nd Hand remove
Imageoutline top sub formula stack systemscelestion driver super tweeter t-3421 hf50 hf-50 8ohmoutline top sub formula stack systems
SKUXTREME24000TOP SUBSTACKHIGHHF50SHSPECTRATop Sub Art
Rating
Price 19,000.00Call for PriceCall for Price55.79 incl. GR VAT 900.00 550.00
Stock

Only 1 left in stock

Only 1 left in stock

Only 4 left in stock

Only 2 left in stock (can be backordered)

Only 2 left in stock

Only 3 left in stock

AvailabilityOnly 1 left in stockOnly 1 left in stockOnly 4 left in stockOnly 2 left in stock (can be backordered)Only 2 left in stockOnly 3 left in stock
Add to cart

Add to cart

Call for Price

Call for Price

Add to cart

Add to cart

Add to cart

Description
ContentLINE ARRAY X-TREME AUDIO SECOND HAND 8000 WATT PRICE WITHOUT V.A.T. 23% 16 X XTMLA Satellites 16 X XTMLAS SUB 4 X XT2600 AMPLIFIER 4 X XT3400 AMPLIFIER 4 X RACK 4 X PANEL POWER DISTRIBUTER 2 Χ FLYING BAR STD-LSA CABLES CONNECTOR LINE ARRAY X-TREME AUDIO SECOND HAND 8000 WATT PRICE WITHOUT V.A.T. 23%     Mini Line Array The ultra-compact Mini Line Array is a three-way sound system suited to theatres and live performances which offers all the advantages of “linear source” technology thanks to the advanced wave-guide horn loading. This product line offers four models of loudspeaker systems, with an intentionally large number of applications, ranging from single speakers right through to array systems for open-air locations, all sharing the same basic requirements: mechanical and acoustic compatibility to achieve a precise directivity control. More specifically, both the bi-amplified XTMLA/A module and the active subwoofer XTMLAS/A, are equipped with a digital amplifier based on a high-tech switching technology and fitted with an internal programmable DSP (24 bit /96 kHz) that can be controlled from an external PC thanks to the XT-NET network and its managing software. The different settings of the DSP can be recalled directly by the user with no need for a PC. The tri-amplifiable passive XTMLA model has a nominal impedance of 16 Ohm and it can be wired in parallel with other 4 loudspeaker systems of the same type to be supplied by a single outer power amplifier. The Mini Line Array system is equipped with a full range of specially designed rigging tools which allow quick and simple deployment in all the intended applications, whether ground supported or flow: the special ESAH suspension system makes setting up an entire line array so easy that it can be accomplished by only one technician. No extra rigging hardware has to be assembled - all necessary equipment is fitted into the cabinet. The XTMLA element (and the active bi-amplified XTMLA/A one) have been designed for the main purpose of obtaining a wide horizontal and vertical coverage. This goal has been achieved by a new wave guide for the high section which is capable of producing a 120° coverage on a horizontal plane. By angling a single wave guide, XTMLA is able to achieve a maximum 15° angle on a vertical plane between each array module. In fact, the corners of the XTMLA's trapezoidal enclosure have been designed to achieve a 2 x 7.5° angle when two loudspeaker systems are coupled. Thanks to a successful coupling across the audible spectrum, XTMLA generates a coherent wave front on a wide area with very tiny variations in the frequency response and sound pressure level. The accuracy, the transparency, the great headroom and the flexibility in the approach of the Mini Line Array system to sound reinforcement open up new horizons for the sound system design.
Mini Line Array
XTMLA
 
System configuration 3-way mini line array module
Power handling RMS 500 W
Frequency response (-3 dB) 75÷18.5k Hz
Peak SPL (@1 m) 136 dB
Coverage Angle (-6 dB) 120° horizontal
Nominal impedance (bi-amp) 16 (LF), 16 (MF+HF) Ohm
Nominal impedance (tri-amp) 16 (LF), 16 (MF), 16 (HF) Ohm
Transducers LF 1x8" neodymium MF 1x6“  neodymium HF 2x1“  titanium
Input connectors 2xNL8FC Speakon
Cabinet birch plywood
Dimensions (WxHxD) 640x310x410 mm
Net weight (Kg) 20.5
Mini Line Array
XTMLAS
 
System configuration arrayable double subwoofer
Power handling RMS 1000 W
Frequency response (-3 dB) 40÷150 Hz
Peak SPL (@1 m) 134 dB
Nominal impedance 8 Ohm
Transducers LF 1x15" neodymium
Cabinet birch plywood
Dimensions (WxHxD) 640x390x680 mm
Net weight (Kg) 40.5
Applications
Concert & touring (small-medium scale)
Central clusters, front fill, side fill, delay towers, etc…
Open-air events, public squares, etc… (small-medium scale)
Portable PA systems for musicians, bands and entertainers (medium size)
Theme parks, Circus shows
Theatres, Auditoriums, Music halls
Places of worship
Fixed installations (medium size)
Live clubs, Music pubs and other Live Performance Venues (medium-large size)
Multi-purpose venues, Recreational and cultural structures, Conference centers and Fairs
Corporate A/V events
 
Specifications OUTLINE SUB 2x18 TOP SUB Subwoofer-2nd Hand- FEATURING Very high power subwoofer systems Compact dimension Topsub: 65.0 cm. H, 1 10.0 cm. W, 50.0 cm. D Minisub; 65.0 cm. H, 55.0 cm. W, 50.0 cm. D Average half space and AES (1 W/Zmin/47r) sensitivity Topsub: 103 dBSPL, AES 100.7 dBSPL Minisub 98 dBSPL, AES 95 dBSPL Power rating Topsub: 1 200WAES Minisub: 600WAES Half space and AES maximum delivered SPL Topsub: 1 34.7 dB SPL cont., 1 3 1.7 dB AES Minisub: 1 26 dB SPL cont., 123dBAES DESCRIPTION Designed with the aid of the most advanced CAD techniques available today, the Outline SubSeries are very high power, extended low frequency systems. The Outline Topsub has two direct radiating, bass relflex loaded, high excursion 4" voice coil 1 8" woofers . The Outline Minisub has one direct radiating, bass relflex loaded, high excursion 4" voice coil 1 8" woofer. The Topsub is rated at 1 00.7 dBSPL (AES) of sensitivity, 1 200WAES of power handling and can deliver 1 3 1 .7 dB (AES) of maximum continuous SPL. The Minisub is rated at 98 dBSPL (AES) of sensitivity, 600WAES of power handling and can deliver 1 23 dB (AES) of maximum continuous SPL. Both models operates only in the very low frequency region and have been designed to be the best complement of the Outline full range loudspeaker systems. The Topbass has a frequency response from 28 to 1 80 Hz. The Minisub has a frequency response from 35 to 1 80 Hz.. Dimensions of the Topsub are 65.0 cm. height, 1 1 0.0 cm. widht 50.0 cm. depth. Dimensions of the Minibass are 65.5 cm. height, 55.0 cm. widht, 50.0 cm. depth. SPECIFICATIONS (Standard AES) Product name: Outline Topsub and Outline Minisub Product type: Very high power, extended low frequency systems Loudspeaker: Topsub: 2 direct radiating bass reflex loaded 1 8" woofers Minisub: 1 direct radiating bass reflex loaded 1 8" woofers Average sensitivity Standard AES: Topsub: 100.7 dBSPL/1W- 1 mt 4n/Zmin Minisub 95 dB SPL/1W- 1 mt 47r/Zmin Frequency response: Topsub: 28- 1 80 + 2/- 6 dB Minisub: 35 - 1 80 +1 /- 4 dB Power rating: Topsub: 1 200WAES, 4800W Peak Minisub: 600WAES, 2400W Peak Maximum deliver'd SPL on 4k IAES): Topsub 1 31.7 dB SPL continuous, 1 37.7 dB Peak Minisub 1 23 dB SPL continuous.. 1 29 dB Peak Maximum delivered SPL at 20 m.: Topsub: 105 dB full space; Minisub: 97 dB full space; + 3 dB half space, + 6 dB with two units mutually coupled Nominal pattern distribution: omnidirectional (- 6 dB) Nominal Directivity Factor Q: 1 Nominal Directivity Index DI: 0 dB Crossover frequency: < 1 80 Hz Impedance: Topsub: Norn 4 Q, Min 3.25 Q at 34 Hz Maximum inductive phase shift: +46° at 53 Hz Maximum capacitive phase shift: -46° at 78 Hz Minisub: Norn 8 Q, Min 6.5 Q at 38 Hz Maximum inductive phase shift: +44° at 44 Hz Maximum capacitive phase shift: - 41 0 at 92 Hz Connectors: Topsub: 1 x Neutrik Speakon NL4MP Pin 1 + pos, Pin 1 - neg Woofer 1 Pin 2 + pos. Pin 2 - neg Woofer 2 Minisub: 1 x Neutrik Speakon NL4MP  Outline Formula Stack High Loudspeaker-2nd Hand Specifications FEATURING Controller assisted medium - long throw, very high power, two units, three ways, four loudspeakers factory assembled loud­ speaker system. Compact dimensions LF unit Modulo MS/15W2 MH unit Modulo MS/PRH 84.2 cm. H, 55 cm. W, 64.5 cm. D (each unit) Average half space (LF) and AES II W/Zmin/47tl sensitivity LF Section: 1 10.8 dBSPL, AES 107.8 dBSPL MF Section: 1 10.1 dBSPL AES HF Section: 1 10.7 dBSPL AES Power rating LF Section: 600 WAES MF Section: 300 WAES HF Section: 150WAES Half space (LF) and AES maximum delivered SPL LF Section: 1 38.8 dBSPL cont., 1 35.8 dB AES MF Section: 1 35.1 dBSPL cont. AES HF Section: 1 32.7 dBSPL cont. AES DESCRIPTION Designed with the aid of the most advanced CAD techniques, the Outline Formula Stack is a controller assisted medium - lo'ng throw, very high power, two units, three ways, four loudspea­ kers factory assembled loudspeaker system. The Outline Formula Stack is composed by two units that have the same external dimensions. It represents a precise configuration, given by the combination of the MODULO program active components. The Stackbass unit is the LF Section. This has a two bandpass loaded 15" woofers. The LF Section is rated at 107.8 dBSPL (AES) of sensitivity, 600WAES of power, and can deliver 1 35.8 dB (AES) of maximum continuous SPL. The Stackhigh unit is the MF Section and the HF Section. The MF Section has a horn loaded oilcooled 1 2" midrange. The MF Section is rated at 1 10.1 dBSPL (AES) of sensitivity, 300WAES of power and can deliver 135.1 dB (AES) of maximum continuous SPL. The HF Section has a horn loaded oilcooled 2" throath compression driver. The HF Section is rated at 1 10.7 dBSPL (AES) of sensitivity, 150WAES of power, and can deliver 132.7 dB (AES) of maximum continuous SPL. The Stackhigh unit can be arranged with any combination of MF and HF Sections, to achieve the needed coverage and performances. The Outline Formula Stack loudspeaker system is a full range system and has a frequency response from 55 to 1 8000 Hz. Nominal pattern distribution is 60° horizontal and 40° vertical. The Stackbass and Stackhigh units have a parallelepiped shaped cabinetry with carrying handles. Dimensions of each unit are 84.2 cm. height, 55 cm. widht, 64.5 cm. depth. * Nominal average dispersion is valid only for high frequencies ( above 5000 Hz); for speech reinforcement purpouse see at mid frequencies average dispersion (500- 4000 Hz). SPECIFICATIONS (Standard AES) Product name: Outline Formula Stack Product type: .. Controller assistend medium - long throw, very high power, two units, three ways, four loudspeakers factory assembled loud­ speaker system. Loudspeakers: Modulo MS/15W2 ( Stackbass): 2 bandpass loaded 15" woofers Modulo MS/PRH (Stackhigh): 1 horn loaded oilcooled 1 2" midrange 1 horn loaded oilcooled 2" throat compression driver Average sensitivity Standard AES: LF Section 107.8 dBSPL/1W-1 mt/4n Zmin MF Section: 110.1 dBSPL/1 W-l mt/47c Zmin HF Section: 1 10.7 dBSPL/1 W-l mt/47C Zmin Frequency response: 55 - 1 8'000 +4/-5 dB Power rating: LF Section: 600WAES, 2400W Peak MF Section: 300 WAES, 1 200W Peak HF Section: 150WAES, 600W Peak Maximum delivered SPL on 4n (AES): LF Section 1 35.8 dB cont., 141.8 dB peak MF Section: 135.1 dBcont., 141.1 dB peak HF Section: 1 32.7 dB cont., 1 38.7 dB peak Maximum SPL at 20 m,: 1 10 dB full space, + 3 dB half space, + 3dB with two units Nominal pattern distribution above 5000 Hz: 45° horizontal, 30° vertical (- 6 dB) Average polar pattern 500 - 4000 Hz: 65° horizontal, 59° vertical Average Directivity Factor Q 500 - 4000 Hz: 8.2 horizontal, 9.5 vertical average Directivity Index DI 500 - 4000 Hz: 9.1 horizontal, 9.5 vertical Average polar pattern 8000 - 1 6000 Hz: 35° horizontal, 26.5° vertical Average Directivity Factor Q 8000 - 16000 Hz: 1 5.2 horizontal, 19.9 vertical average Directivity Index DI 8000 - 16000 Hz: 1 1.8 horizontal, 1 3 vertical. Crossover frequencies: 300 e 1600 Hz. Impedance: LF Section: Nom 4 Q, Min 3.5 Q at 75 Hz Maximum inductive phase shift: +50° at 1 31 Hz Maximum capacitive phase shift: -38° at 173 Hz MF Section: Nom 8 Q, Min 6.7 Q at 235 Hz Maximum, inductive phase shift: +43° at 3000 Hz Maximum capacitive phase shift: - 16° a 206 Hz HF Section: Nom 14 Q, Min 1 1.7 Q at 1025 Hz Maximum inductive phase shift: +42° at 20000 Hz Maximum capacitive phase shift: - 4° a 1 91 2 Hz Connectors: Modulo MS/15W2 (Stackbass): 1 x Neutrik Speakon NL4MP Pin 1 + pos, Pin 1- neg LF Section woofer 1 Pin 2 + pos, Pin 1 - neg LF Section woofer 2 Modulo MS/PRH (Stackhigh): 2 x Neutrik Speakon NL4MP parallel wired Pin 1 + pos, Pin 1 - neg MF Section Pin 2 + pos, Pin 2 - neg HF Section Protections: HF Section 40 pF capacitor. Dimensions and net weight. Modulo MS/15W2 (Stackbass unit): 84.2 cm height, 55.0 cm widht, 64.5 cm depth, 57 Kg net. Modulo MS/PRH (Stackhigh unit): 84,2 cm height, 55 cm widht, 64.5 cm depth, 62 Kg net. Dimensions Volume and gross weight. Modulo MS/15W2(Stackbass unit): 91 cm height, 63 cm widht, 73 cm depth, 0,42 m3 volume , 63,5 Kg gross. Modulo MS/PRH (Stackhigh unit): 91 cm height, 63 cm widht, 73 cm depth, 0,42 m3 volume, 69 Kg gross. Enclosures: parallelepiped shaped enclosures built with 15 mm cross coupled layers, plywood birch with rounded edges and handles. Finish: Water resistant, textured scratchproof sandcolour painting Supplied accessories: Neutrik Speakon NL4FC Connectors Optional accessories: Outline FSC1 active control unit Aluminium corner protections Minimum suggested set up*: N° 1 Outline Modulo MS/15W2 (Stackbass), N° 1 Outline Modulo MS/PRH (Stachigh), N° 2 Outline FSC1 N° 1 Outline LF600/SP1300 (LF section), N° 1 Outline SP1000, N° 1 Outline SP800 (MF/HF section) The Outline Formula Stack loudspeaker system has been designed to offer the highest performances in medium size dimensions and weights. The Formula Stack system is recommended for all those applications that needs the reproduction of vocal or musical program material, with wide audio spectrum and high dynamic range, played live or reproduced from any kind of media, in the largest open or closed environments, and where is expected a very wide audience.The Formula Stack loudspeaker system can be used to design concentrated or distributed sound systems. It is well suited for musical shows in big music halls, stadiums, discos, theatres, and can be used to built very high power front of house loudspeaker system arrays. It can be used also in small environments if the listening distance is not less than 8 m. A pair of Formula Stack loudspeaker system will provide an enough high sound pressure level (about 98 dB SPL) up to 100 m. away from it if the listener or the audience will be inside of its sound pattern distribution. The whole sound system built with two stacks will provide enough SPL to cover about 1000 people. For the most demanding application is recommended to use two Stackbass unit for each Stackhigh unit in the system. DRIVING REQUIREMENTS The Outline Formula Stack is a processor controlled three ways four loudspeakes system and has been designed to work with each loudspeaker directly wired to the power amplifiers, as requested by the technology called poly-amplification. To do this, the active controller Outline FSC1 has been designed to optimize any parameter requested from the loud­ speaker system. The active controller performs a lot of needed functions, including dynamic invariant bandpass filtering, acoustic centres time correction and signal limiting to achieve the best performances of all the loudspeaker in the system. Three independent driving amplifier channels are required, and each of them must deliver on the minimum impedance value of each Section a value of power at least equal to what is specified for each Section.     PRICE WITHOUT VAT    

Second Hand good condition Super Tweeter Bullet Celestion HF50, T3421. -when you place your order, we will send you the picture of the product- T5500/-R, T5500-R, T-5500/-R, T-5500-R.Outline Spectra 800Wrms-4 Ohms Loudspeaker-2nd Hand- Price without VAT 23%Specifications OUTLINE SUB 2x18 TOP SUB Subwoofer-2nd Hand- FEATURING Very high power subwoofer systems Compact dimension Topsub: 65.0 cm. H, 1 10.0 cm. W, 50.0 cm. D Minisub; 65.0 cm. H, 55.0 cm. W, 50.0 cm. D Average half space and AES (1 W/Zmin/47r) sensitivity Topsub: 103 dBSPL, AES 100.7 dBSPL Minisub 98 dBSPL, AES 95 dBSPL Power rating Topsub: 1 200WAES Minisub: 600WAES Half space and AES maximum delivered SPL Topsub: 1 34.7 dB SPL cont., 1 3 1.7 dB AES Minisub: 1 26 dB SPL cont., 123dBAES DESCRIPTION Designed with the aid of the most advanced CAD techniques available today, the Outline SubSeries are very high power, extended low frequency systems. The Outline Topsub has two direct radiating, bass relflex loaded, high excursion 4" voice coil 1 8" woofers . The Outline Minisub has one direct radiating, bass relflex loaded, high excursion 4" voice coil 1 8" woofer. The Topsub is rated at 1 00.7 dBSPL (AES) of sensitivity, 1 200WAES of power handling and can deliver 1 3 1 .7 dB (AES) of maximum continuous SPL. The Minisub is rated at 98 dBSPL (AES) of sensitivity, 600WAES of power handling and can deliver 1 23 dB (AES) of maximum continuous SPL. Both models operates only in the very low frequency region and have been designed to be the best complement of the Outline full range loudspeaker systems. The Topbass has a frequency response from 28 to 1 80 Hz. The Minisub has a frequency response from 35 to 1 80 Hz.. Dimensions of the Topsub are 65.0 cm. height, 1 1 0.0 cm. widht 50.0 cm. depth. Dimensions of the Minibass are 65.5 cm. height, 55.0 cm. widht, 50.0 cm. depth. SPECIFICATIONS (Standard AES) Product name: Outline Topsub and Outline Minisub Product type: Very high power, extended low frequency systems Loudspeaker: Topsub: 2 direct radiating bass reflex loaded 1 8" woofers Minisub: 1 direct radiating bass reflex loaded 1 8" woofers Average sensitivity Standard AES: Topsub: 100.7 dBSPL/1W- 1 mt 4n/Zmin Minisub 95 dB SPL/1W- 1 mt 47r/Zmin Frequency response: Topsub: 28- 1 80 + 2/- 6 dB Minisub: 35 - 1 80 +1 /- 4 dB Power rating: Topsub: 1 200WAES, 4800W Peak Minisub: 600WAES, 2400W Peak Maximum deliver'd SPL on 4k IAES): Topsub 1 31.7 dB SPL continuous, 1 37.7 dB Peak Minisub 1 23 dB SPL continuous.. 1 29 dB Peak Maximum delivered SPL at 20 m.: Topsub: 105 dB full space; Minisub: 97 dB full space; + 3 dB half space, + 6 dB with two units mutually coupled Nominal pattern distribution: omnidirectional (- 6 dB) Nominal Directivity Factor Q: 1 Nominal Directivity Index DI: 0 dB Crossover frequency: < 1 80 Hz Impedance: Topsub: Norn 4 Q, Min 3.25 Q at 34 Hz Maximum inductive phase shift: +46° at 53 Hz Maximum capacitive phase shift: -46° at 78 Hz Minisub: Norn 8 Q, Min 6.5 Q at 38 Hz Maximum inductive phase shift: +44° at 44 Hz Maximum capacitive phase shift: - 41 0 at 92 Hz Connectors: Topsub: 1 x Neutrik Speakon NL4MP Pin 1 + pos, Pin 1 - neg Woofer 1 Pin 2 + pos. Pin 2 - neg Woofer 2 Minisub: 1 x Neutrik Speakon NL4MP  
Weight999.99 kg30.00 kg45.00 kg1.20 kg32.00 kg30.00 kg
DimensionsN/AN/AN/AN/AN/AN/A
Additional information
Weight 999.99 kg
Weight 30.00 kg
Weight 45.00 kg
Weight 1.20 kg
Weight 32.00 kg
Weight 30.00 kg