LINE ARRAY X-TREME AUDIO SECOND HAND 8000 WATT PRICE WITHOUT V.A.T. 23% 16 X XTMLA Satellites 16 X XTMLAS SUB 4 X XT2600 AMPLIFIER 4 X XT3400 AMPLIFIER 4 X RACK 4 X PANEL POWER DISTRIBUTER 2 Χ FLYING BAR STD-LSA CABLES CONNECTOR LINE ARRAY X-TREME AUDIO SECOND HAND 8000 WATT PRICE WITHOUT V.A.T. 23% […]
The ultra-compact Mini Line Array is a three-way sound system suited to theatres and live performances which offers all the advantages of “linear source” technology thanks to the advanced wave-guide horn loading.
This product line offers four models of loudspeaker systems, with an intentionally large number of applications, ranging from single speakers right through to array systems for open-air locations, all sharing the same basic requirements: mechanical and acoustic compatibility to achieve a precise directivity control. More specifically, both the bi-amplified XTMLA/A module and the active subwoofer XTMLAS/A, are equipped with a digital amplifier based on a high-tech switching technology and fitted with an internal programmable DSP (24 bit /96 kHz) that can be controlled from an external PC thanks to the XT-NET network and its managing software. The different settings of the DSP can be recalled directly by the user with no need for a PC.
The tri-amplifiable passive XTMLA model has a nominal impedance of 16 Ohm and it can be wired in parallel with other 4 loudspeaker systems of the same type to be supplied by a single outer power amplifier. The Mini Line Array system is equipped with a full range of specially designed rigging tools which allow quick and simple deployment in all the intended applications, whether ground supported or flow: the special ESAH suspension system makes setting up an entire line array so easy that it can be accomplished by only one technician. No extra rigging hardware has to be assembled – all necessary equipment is fitted into the cabinet.
The XTMLA element (and the active bi-amplified XTMLA/A one) have been designed for the main purpose of obtaining a wide horizontal and vertical coverage.
This goal has been achieved by a new wave guide for the high section which is capable of producing a 120° coverage on a horizontal plane.
By angling a single wave guide, XTMLA is able to achieve a maximum 15° angle on a vertical plane between each array module. In fact, the corners of the XTMLA’s trapezoidal enclosure have been designed to achieve a 2 x 7.5° angle when two loudspeaker systems are coupled.
Thanks to a successful coupling across the audible spectrum, XTMLA generates a coherent wave front on a wide area with very tiny variations in the frequency response and sound pressure level.
The accuracy, the transparency, the great headroom and the flexibility in the approach of the Mini Line Array system to sound reinforcement open up new horizons for the sound system design.
LINE ARRAY X-TREME AUDIO SECOND HAND 8000 WATT
PRICE WITHOUT V.A.T. 23%
16 X XTMLA Satellites
16 X XTMLAS SUB
4 X XT2600 AMPLIFIER
4 X XT3400 AMPLIFIER
4 X RACK
4 X PANEL POWER DISTRIBUTER
2 Χ FLYING BAR STD-LSA
CABLES CONNECTOR
LINE ARRAY X-TREME AUDIO SECOND HAND 8000 WATT
PRICE WITHOUT V.A.T. 23%
Mini Line Array
The ultra-compact Mini Line Array is a three-way sound system suited to theatres and live performances which offers all the advantages of “linear source” technology thanks to the advanced wave-guide horn loading.
This product line offers four models of loudspeaker systems, with an intentionally large number of applications, ranging from single speakers right through to array systems for open-air locations, all sharing the same basic requirements: mechanical and acoustic compatibility to achieve a precise directivity control. More specifically, both the bi-amplified XTMLA/A module and the active subwoofer XTMLAS/A, are equipped with a digital amplifier based on a high-tech switching technology and fitted with an internal programmable DSP (24 bit /96 kHz) that can be controlled from an external PC thanks to the XT-NET network and its managing software. The different settings of the DSP can be recalled directly by the user with no need for a PC.
The tri-amplifiable passive XTMLA model has a nominal impedance of 16 Ohm and it can be wired in parallel with other 4 loudspeaker systems of the same type to be supplied by a single outer power amplifier. The Mini Line Array system is equipped with a full range of specially designed rigging tools which allow quick and simple deployment in all the intended applications, whether ground supported or flow: the special ESAH suspension system makes setting up an entire line array so easy that it can be accomplished by only one technician. No extra rigging hardware has to be assembled - all necessary equipment is fitted into the cabinet.
The XTMLA element (and the active bi-amplified XTMLA/A one) have been designed for the main purpose of obtaining a wide horizontal and vertical coverage.
This goal has been achieved by a new wave guide for the high section which is capable of producing a 120° coverage on a horizontal plane.
By angling a single wave guide, XTMLA is able to achieve a maximum 15° angle on a vertical plane between each array module. In fact, the corners of the XTMLA's trapezoidal enclosure have been designed to achieve a 2 x 7.5° angle when two loudspeaker systems are coupled.
Thanks to a successful coupling across the audible spectrum, XTMLA generates a coherent wave front on a wide area with very tiny variations in the frequency response and sound pressure level.
The accuracy, the transparency, the great headroom and the flexibility in the approach of the Mini Line Array system to sound reinforcement open up new horizons for the sound system design.
Central clusters, front fill, side fill, delay towers, etc…
♦
Open-air events, public squares, etc… (small-medium scale)
♦
Portable PA systems for musicians, bands and entertainers (medium size)
♦
Theme parks, Circus shows
♦
Theatres, Auditoriums, Music halls
♦
Places of worship
♦
Fixed installations (medium size)
♦
Live clubs, Music pubs and other Live Performance Venues (medium-large size)
♦
Multi-purpose venues, Recreational and cultural structures, Conference centers and Fairs
♦
Corporate A/V events
Musica Pro SR10F 250W Loudspeaker-2nd Hand-
Specifications
OUTLINE SUB 2x18 TOP SUB Subwoofer-2nd Hand-
FEATURING
Very high power subwoofer systems
Compact dimension
Topsub: 65.0 cm. H, 1 10.0 cm. W, 50.0 cm. D
Minisub; 65.0 cm. H, 55.0 cm. W, 50.0 cm. D
Average half space and AES (1 W/Zmin/47r) sensitivity
Topsub: 103 dBSPL, AES 100.7 dBSPL
Minisub 98 dBSPL, AES 95 dBSPL
Power rating
Topsub: 1 200WAES
Minisub: 600WAES
Half space and AES maximum delivered SPL
Topsub: 1 34.7 dB SPL cont., 1 3 1.7 dB AES
Minisub: 1 26 dB SPL cont., 123dBAES
DESCRIPTION
Designed with the aid of the most advanced CAD techniques available today, the Outline SubSeries are very high power, extended low frequency systems.
The Outline Topsub has two direct radiating, bass relflex loaded, high excursion 4" voice coil 1 8" woofers .
The Outline Minisub has one direct radiating, bass relflex loaded, high excursion 4" voice coil 1 8" woofer.
The Topsub is rated at 1 00.7 dBSPL (AES) of sensitivity, 1 200WAES of power handling and can deliver 1 3 1 .7 dB (AES) of maximum continuous SPL.
The Minisub is rated at 98 dBSPL (AES) of sensitivity, 600WAES of power handling and can deliver 1 23 dB (AES) of maximum continuous SPL.
Both models operates only in the very low frequency region and have been designed to be the best complement of the Outline full range loudspeaker systems.
The Topbass has a frequency response from 28 to 1 80 Hz. The Minisub has a frequency response from 35 to 1 80 Hz.. Dimensions of the Topsub are 65.0 cm. height, 1 1 0.0 cm. widht 50.0 cm. depth.
Dimensions of the Minibass are 65.5 cm. height, 55.0 cm. widht, 50.0 cm. depth.
SPECIFICATIONS (Standard AES) Product name:
Outline Topsub and Outline Minisub Product type:
Very high power, extended low frequency systems Loudspeaker:
Topsub: 2 direct radiating bass reflex loaded 1 8" woofers Minisub: 1 direct radiating bass reflex loaded 1 8" woofers Average sensitivity Standard AES:
Topsub: 100.7 dBSPL/1W- 1 mt 4n/Zmin Minisub 95 dB SPL/1W- 1 mt 47r/Zmin Frequency response:
Topsub: 28- 1 80 + 2/- 6 dB Minisub: 35 - 1 80 +1 /- 4 dB Power rating:
Topsub: 1 200WAES, 4800W Peak Minisub: 600WAES, 2400W Peak Maximum deliver'd SPL on 4k IAES):
Topsub 1 31.7 dB SPL continuous, 1 37.7 dB Peak Minisub 1 23 dB SPL continuous.. 1 29 dB Peak Maximum delivered SPL at 20 m.:
Topsub: 105 dB full space; Minisub: 97 dB full space;
+ 3 dB half space, + 6 dB with two units mutually coupled
Nominal pattern distribution:
omnidirectional (- 6 dB)
Nominal Directivity Factor Q: 1
Nominal Directivity Index DI: 0 dB
Crossover frequency: < 1 80 Hz
Impedance:
Topsub: Norn 4 Q, Min 3.25 Q at 34 Hz
Maximum inductive phase shift: +46° at 53 Hz
Maximum capacitive phase shift: -46° at 78 Hz
Minisub: Norn 8 Q, Min 6.5 Q at 38 Hz
Maximum inductive phase shift: +44° at 44 Hz
Maximum capacitive phase shift: - 41 0 at 92 Hz
Connectors:
Topsub:
1 x Neutrik Speakon NL4MP Pin 1 + pos, Pin 1 - neg Woofer 1 Pin 2 + pos. Pin 2 - neg Woofer 2 Minisub:
1 x Neutrik Speakon NL4MP
SECOND HAND GOOD CONDITION SUBWOOFER 1400 watt 2X15" NET PRICE - VAT EXCLUDE
SpiraTech Series • ARS-215
Dual 15“, High Power
Sub-Woofer
The ARS-215 Sub-Woofer is a double 15" enclosure designed for the reproduction of the sub low frequency spectrum of sound with a very high quality reproduction. Its main purpose is sound reinforcement in set-ups requiring high SPL down to extreme levels with absolute fidelity. Typical applications include live concerts and all types of multi-media events.
Ergonomic handles are provided on the enclosures' side panels for ease of handling. Heavy duty skids protect the cabinet against normal work abrasion.
Heavy duty castors are integrated in the base of the enclosure to permit easy transport on site.
Main Characteristics
Double-tuned, parallel band-pass design.
Advanced Technology transducers including optimised cooling and all-weather cones.
Precision cabinet construction to achieve light and high resistance cabinets.
All these characteristics contribute to obtain the advantages and performance of a true Sub-Woofer, so important in a Line Array rig. Its benefits are positively noticeable in P.A. set-ups as well as in fixed installations. The ARS-215 enclosure enhances the whole system with an extra low-energy input that is so important in today's music material, whatever the style.
The ARS-215 is a rugged enclosure, which mounts two high power 15" transducers in a double-tuned, parallel Band-Pass configuration. With these advanced components the cabinet renders an astounding effectiveness hard to match by any other cabinet of its class and size.
The cabinet is equipped with a protection front steel grille, coated with outdoor resistant compounds. It is fitted with heavy-duty skids permitting stacking in total security.
Integrated, side handles are provided for ease of operation.
The ARS-215 Subs can be stacked in the required proportions under the flown units or in a centrally situated position under the stage level. Its Efficiency and Frequency Range vary and depend on the total number of cabinets used.
The horizontal coverage will be inversely proportional to the product of the length of the array and the concerned frequency. In this case between 20 and 80 Hz. Or put in a different way, the higher the number of cabinets, the better our directivity control and the more specific our pattern behaviour. Thus a medium/large assembly of subs in a Line Array rig is capable of producing large amounts of low-end energy.
Applications
Auditoria
Stadia
Concert Halls
Convention Centres
Theatres
Open-air concerts and general events
Large Ballrooms
Specifications and Characteristics
Frequency Response (Hz)
±3dB 40Hz - 75Hz
Frequency Range (Hz)
±10dB 31Hz - 90Hz
Sensitivity (dB/2,83V@1m)
101dB
SPL Max./Peak (dB SPL@1m.)
138dB
Recommended Signal Processor
RAM Audio LMS 244 Digital Processor
Recommended crossover
L-R 24dB/Oct - 80Hz
Input power rating
1400W AES
2800W Program
5600W Peak
Recommended power amp
1200W - 2200W RMS 4 Ohm amplifier
Constructive Elements
Transducers
2x15" transducers with 4" coil.
1400W AES. (700W AES per unit)
Enclosure
Horizontal parallelepiped construction, 18mm Baltic cross ply, tongue and groove assembly throughout. 35mm front panel and outer frame.
Bi-component epoxy finish
Protection Grille
1.5mm laminated steel with textured epoxy finish
Enclosure protections
Skids on all resting surfaces
Handles
Cut in the enclosure for ease of handling
Connectors
Two Neutrik NL-8 connectors on steel back plate
Dimensions (WxDxH)
1030 x 646 x 436 mm
40.5 x 25.4 x 17.1 inches
Net Weight
65Kg (143 pounds)
Frequency Response (Hz) : +/- 3dB 40Hz - 75Hz
Frequency Range (Hz) : +/- 10dB 31Hz - 90Hz
Sensitivity (dB / 2,83V@1m.) : 101dB
SPL Max / Peak (dB SPL@1m.): 138dB
Recommended signal processor: RAM Audio LMS 244 Digital Processor
Recommended crossover: L - R 24dB / oct - 80Hz
Input power rating: 1400W AES, 2800W Program, 5600W Peak
picture panel 50 x 60 cm (photo not included) recom. Amplifier: max 120w /channel, 8 Ohm, Black or Brown frame
4 exciter driven wall mount speakerpanel, 150 w Rms, 12 Ohms, 86 dB 1w/1m, 107 dB max spl
This website uses cookies to improve your experience. We'll assume you're ok with this, but you can opt-out if you wish. Cookie settingsACCEPT
Privacy & Cookies Policy
Πολιτική χρήσης
Αυτός ο ιστότοπος χρησιμοποιεί cookies για να βελτιώσει την εμπειρία σας ενώ περιηγείστε στον ιστότοπο. Από αυτά τα cookies, κάποια cookie κατηγοριοποιούνται ως απαραίτητα να αποθηκεύονται στο πρόγραμμα περιήγησης σας, καθώς είναι απαραίτητα για τη λειτουργία βασικών λειτουργιών του ιστότοπου. Χρησιμοποιούμε επίσης cookies τρίτων που μας βοηθούν να αναλύσουμε και να κατανοήσουμε πώς χρησιμοποιείτε αυτόν τον ιστότοπο. Αυτά τα cookies θα αποθηκευτούν στο πρόγραμμα περιήγησης σας μόνο με τη συγκατάθεσή σας. Έχετε επίσης την επιλογή να εξαιρεθείτε από αυτά τα cookies. Ωστόσο, η εξαίρεση από ορισμένα από αυτά τα cookie μπορεί να επηρεάσει την εμπειρία περιήγησης σας.
Necessary cookies are absolutely essential for the website to function properly. This category only includes cookies that ensures basic functionalities and security features of the website. These cookies do not store any personal information.
Any cookies that may not be particularly necessary for the website to function and is used specifically to collect user personal data via analytics, ads, other embedded contents are termed as non-necessary cookies. It is mandatory to procure user consent prior to running these cookies on your website.
Reviews
There are no reviews yet.