The 120W black Impact TC132-T 2-Way 3.5″ Full Range Loudspeaker from Turbosound consists of a high excursion 3.5″ low frequency driver with a high temperature voice coil, matched to a 1″ ferrofluid cooled neodymium high frequency driver on a proprietary elliptical waveguide providing wide 120° horizontal by 100° vertical dispersion. The TCI32-T includes an internal […]
The 120W black Impact TC132-T 2-Way 3.5″ Full Range Loudspeaker from Turbosound consists of a high excursion 3.5″ low frequency driver with a high temperature voice coil, matched to a 1″ ferrofluid cooled neodymium high frequency driver on a proprietary elliptical waveguide providing wide 120° horizontal by 100° vertical dispersion.
The TCI32-T includes an internal line transformer with multiple taps for use in 70V and 100V line distributed systems, and also provides a 160-ohm low impedance direct input. The TCI32-T is supplied with an adjustable wall mounting bracket which provides the loudspeaker connections as an integral part of the bracket assembly, allowing the brackets to be sited, installed and wired independently.
The architecturally styled glass filled impact resistant enclosure is finished in semi matte black to fit unobtrusively in many environments. M6 threaded fixings are provided on the rear for use with TURBOSOUND wall and ceiling brackets, and OmniMount brackets, and a 3/8″ threaded insert is provided behind an EPDM rubber cover on the bottom of the cabinet for use with microphone stands as a spot monitor.
Compact 2 way full range surface-mount loudspeaker for installation applications30W continuous, 120W peak powerHigh excursion 3.5″ low frequency driver with high temperature voice coil1″ ferrofluid cooled neodymium high frequency driverMultiple transformer taps for 70 V and 100 V line systems or 16-ohm direct inputProprietary elliptical waveguide provides wide 120º H x 100º V dispersionArchitecturally styled glass filled impact resistant enclosureSemi matte black finish fits unobtrusively in any environment2 x M6 rigging points compatible with TURBOSOUND and OmniMount brackets (sold separately)3/8″ microphone stand fitting for spot monitor applicationsDesigned and engineered in England
Components
1 x 3.5″ (89 mm) LF driver 1 x 1″ (25 mm) Neodymium Ferrofluid Cooled HF Tweeter
Frequency Response
90 Hz to 20 kHz ±3 dB 70 Hz to 20 kHz ±10 dB
Dispersion
120° H x 100° V @ -6 dB points
Sensitivity
88 dB SPL @ 1 W/3.3\’ (1 m)
Power Handling
30 W continuous, 120 W peak Transformer Taps at 30 W, 15 W, 7.5 W (100 V Line) 30 W, 15 W, 7.5 W, 3.75 W (70 V Line), and Low Impedance Setting
Maximum Sound Pressure Level (SPL)
103 dB continuous, 109 dB peak
Nominal Impedance
16 ohms
Crossover
Internal passive crossover at 2.5 kHz, 12 dB / Octave
Connectors
Color coded binding posts
Construction
Gas injected glass filled molded ABS enclosure
Grille
Powder coated galvanized perforated steel
Rigging
2 x M6 fixing points for TCI-WB wall bracket (supplied) Compatible with TURBOSOUND wall brackets and ceiling brackets, and OmniMount brackets
Standards
Fire retardant UL94 V-0 ABS
Dimensions
9.5 x 5.7 x 5.7″ (242 x 145 x 149 mm)
Weight
6.2 lb (2.8 kg)
Weight
2.80 kg
Reviews
There are no reviews yet.
Be the first to review “TURBOSOUND IMPACT TCI32-T 2 Way 3.5″ Full Range Loudspeaker 30W/16Ω (Black, 120W)” Cancel reply
The 120W black Impact TC132-T 2-Way 3.5" Full Range Loudspeaker from Turbosound consists of a high excursion 3.5" low frequency driver with a high temperature voice coil, matched to a 1" ferrofluid cooled neodymium high frequency driver on a proprietary elliptical waveguide providing wide 120° horizontal by 100° vertical dispersion.
The TCI32-T includes an internal line transformer with multiple taps for use in 70V and 100V line distributed systems, and also provides a 160-ohm low impedance direct input. The TCI32-T is supplied with an adjustable wall mounting bracket which provides the loudspeaker connections as an integral part of the bracket assembly, allowing the brackets to be sited, installed and wired independently.
The architecturally styled glass filled impact resistant enclosure is finished in semi matte black to fit unobtrusively in many environments. M6 threaded fixings are provided on the rear for use with TURBOSOUND wall and ceiling brackets, and OmniMount brackets, and a 3/8" threaded insert is provided behind an EPDM rubber cover on the bottom of the cabinet for use with microphone stands as a spot monitor.
Compact 2 way full range surface-mount loudspeaker for installation applications30W continuous, 120W peak powerHigh excursion 3.5" low frequency driver with high temperature voice coil1" ferrofluid cooled neodymium high frequency driverMultiple transformer taps for 70 V and 100 V line systems or 16-ohm direct inputProprietary elliptical waveguide provides wide 120º H x 100º V dispersionArchitecturally styled glass filled impact resistant enclosureSemi matte black finish fits unobtrusively in any environment2 x M6 rigging points compatible with TURBOSOUND and OmniMount brackets (sold separately)3/8" microphone stand fitting for spot monitor applicationsDesigned and engineered in England
Components
1 x 3.5" (89 mm) LF driver 1 x 1" (25 mm) Neodymium Ferrofluid Cooled HF Tweeter
Frequency Response
90 Hz to 20 kHz ±3 dB 70 Hz to 20 kHz ±10 dB
Dispersion
120° H x 100° V @ -6 dB points
Sensitivity
88 dB SPL @ 1 W/3.3\' (1 m)
Power Handling
30 W continuous, 120 W peak Transformer Taps at 30 W, 15 W, 7.5 W (100 V Line) 30 W, 15 W, 7.5 W, 3.75 W (70 V Line), and Low Impedance Setting
Maximum Sound Pressure Level (SPL)
103 dB continuous, 109 dB peak
Nominal Impedance
16 ohms
Crossover
Internal passive crossover at 2.5 kHz, 12 dB / Octave
Connectors
Color coded binding posts
Construction
Gas injected glass filled molded ABS enclosure
Grille
Powder coated galvanized perforated steel
Rigging
2 x M6 fixing points for TCI-WB wall bracket (supplied) Compatible with TURBOSOUND wall brackets and ceiling brackets, and OmniMount brackets
Standards
Fire retardant UL94 V-0 ABS
Dimensions
9.5 x 5.7 x 5.7" (242 x 145 x 149 mm)
Weight
6.2 lb (2.8 kg)
The DYNACORD VL262W 2-way fullrange cabinet has been optimized acoustically and mechanically for multi-functional applications. With a variety of mounting accessories and decent cosmetics the VL262 is ideally suited to be used in most demanding applications. The VL262W is manufactured from birch plywood and therefore extremely resistant against abuse on the road. The surface is painted with a black 2-component paint that can easily be renovated if sometimes necessary. For the low frequencies and mid frequencies two ultra-low distortion DND 6130-16 Neodymium transducers are used. High frequencies are radiated from a rotatable HPT94 constant directivity horn equipped with an Electro-Voice DH3 driver. Linear-Phase FIR factory presets for the IRIS-Net RCM-26 module and factory presets for regular digital speaker controllers, e.g. DSP244 are available. EASE and Ulysses data allow fast and precise simulations.
Cabinet Full-Range Configuration passive 2-Way Nominal Impedance 8 ohms Rated Power RMS 300 watts Program Power 600 watts Peak Power 1200 watts SPL 2,83 V/1m 97 dB max. SPL 1m (calc. with Peak) 125 dB Freq. Range (-10 dB) 90Hz - 20Hz Coverage Angle nom. 90° x 40° Passive X-Over Frequency 2,2 kHz VCT Protections Halogen Components HIGH Ev DH 3 Order-# D353078 Components LOW 2x DND 6130-16 Order-# D366420 Connectors SPEAKON 2x NL 4MPR Pin Wiring Normal/Fullrange 1+/1- Pin Wiring Biamped HF --- Pin Wiring Biamped LF --- Dimensions (WxHxD) mm 217x 543x 230 Net Weight 10 kg Enclosure Material Birch Plywood
The cabinet of the SAT242G2 is made of 12mm MDF with adurable textured finish and is available in black and white. It is connected via spring terminals. M6 inserts and an included mounting bracket provide numerous possibilities for mounting; a universal joint mount is available as an accessory.
Specifications 2 x 4" Installation Monitor Passive:
Specifications SR-H3S
Enclosure Bass-reflex type
Power Handling Capacity Continuous program: 360W
Rated Impedance 8Ω
Sensitivity (1W,1m equivalent measured at 4m) 92dB
Frequency Response 90 – 17,000Hz (when using optional Digital processor)
Directivity Angle Horizontal: 90°, Vertical: 20° (within the range of speaker height)
Speaker Component 7cm (2.8“) cone-type × 16
Input Connector Removable input connector
Finish
Enclosure MDF, white, urethane paint
Front grille Punched steel plate, white, acrylic paint
Dimensions 84 (W) × 1177.2 (H) × 17 (D)mm (3.31" x 46.35" x 6.18“)
Weight 7.9kg (17.42 lb)
Option Extension plate: SR-EP3, Wall mounting bracket: SR-WB3, Wall tilt bracket: SR-TB3, Flying bracket: SR-FB3, Speaker stand adapter: SR-SA3, Speaker stand: ST-33B, Matching transformer: MT-S0301, Digital processor: DP-0206
Roadboy 65 passive slave speaker unit
30 W RMS
120 W Peak
3.6 kg
The AC15 is an ultra-compact, fullrange loudspeaker system designed to provide maximum bandwidth and SPL in a single system package and be visually unobtrusive. The enclosure design allows for installation very close to walls and ceilings, making it ideal for installation under balconies, columns, or for wall mounting. The high frequency device is a 1" dome tweeter integrated
into a 90° x 90° waveguide that provides even coverage throughout the intended usage area. The AC15 utilizes a 5.25" Symmetrical Field Geometry (SFG™) LF Transducer with a copper-clad aluminum edge wound 1.5" voice coil and a copper-capped pole piece that improves performance by reducing voice coil inductance and distortion.
The multi-ply hardwood enclosure is designed to work in the vertical plane as well as in the horizontal plane. Mounting points are provided for an optional U-bracket and for an OmniMount® type bracket. The plywood enclosure features JBLʼs DuraFlex™ finish and comes with a powder coated steel, foam-backed grille.
Features:
1" Dome Tweeter with 90° x 90° Coverage.
5.25" (135 mm) LF transducer
Ultra compact enclosure
300W Program Power
Dual Neutrik NL4 connectors plus screw terminal
Attachment points for optional U-bracket
Specifications:
Frequency Range (-10 dB): 80 Hz -20 kHz
Frequency Response (±3 dB): 90 Hz -18 kHz
Power Rating:
150W Cont. Pink Noise
300W Program
600W Peak
Impedance: 16 Ohms
Coverage Pattern: 90° x 90°
Dimensions: 9.5" H x 5.9" W x 7" D (241.3 x150.3 x 177.8mm)
Weight: 10.5 lbs. (4.7 kg)
This website uses cookies to improve your experience. We'll assume you're ok with this, but you can opt-out if you wish. Cookie settingsACCEPT
Privacy & Cookies Policy
Πολιτική χρήσης
Αυτός ο ιστότοπος χρησιμοποιεί cookies για να βελτιώσει την εμπειρία σας ενώ περιηγείστε στον ιστότοπο. Από αυτά τα cookies, κάποια cookie κατηγοριοποιούνται ως απαραίτητα να αποθηκεύονται στο πρόγραμμα περιήγησης σας, καθώς είναι απαραίτητα για τη λειτουργία βασικών λειτουργιών του ιστότοπου. Χρησιμοποιούμε επίσης cookies τρίτων που μας βοηθούν να αναλύσουμε και να κατανοήσουμε πώς χρησιμοποιείτε αυτόν τον ιστότοπο. Αυτά τα cookies θα αποθηκευτούν στο πρόγραμμα περιήγησης σας μόνο με τη συγκατάθεσή σας. Έχετε επίσης την επιλογή να εξαιρεθείτε από αυτά τα cookies. Ωστόσο, η εξαίρεση από ορισμένα από αυτά τα cookie μπορεί να επηρεάσει την εμπειρία περιήγησης σας.
Necessary cookies are absolutely essential for the website to function properly. This category only includes cookies that ensures basic functionalities and security features of the website. These cookies do not store any personal information.
Any cookies that may not be particularly necessary for the website to function and is used specifically to collect user personal data via analytics, ads, other embedded contents are termed as non-necessary cookies. It is mandatory to procure user consent prior to running these cookies on your website.
Reviews
There are no reviews yet.