Content |
The Turbosound iQ15 PA Loudspeaker is perfect for a wide range of portable and fixed installation applications. The iQ15 features a 15\'\' low frequency driver with a low mass voice coil and a 1\'\' compression driver, this combination delivers improved transient responses as well as crystal clear, extended high frequency sound reproduction. This powered loudspeaker also comes equipped with premium features that include extensive yet simple to use DSP controls, Spatial Contour Control (SCC), Ultranet digital audio networking and a user-friendly LCD display.
Intuitive Rear Panel
The rear panel houses a fully featured interface that includes a LCD display, Channel A/B gain control and a single rotary encoder for intuitive access to level, EQ, Speaker modelling, SCC, Subwoofer integration and Feedback Control (FBI). The rear panel also features two balanced XLR inputs, balanced XLR outputs for each of the two independent channels, a Mix output XLR connector and level control with a signal LED on each channel.
Extensive but Simple DSP Control
The iQ15 active speaker is equipped with a sophisticated but easy to use Klark Teknik Digital Signal Processor (DSP), which provides a dynamic EQ for incredible full range responses and transparent limiting for the utmost clarity at high output levels, as well as long-term reliability. The advanced DSP also includes speaker modelling presets that consist of detailed and accurate models of some of the audio industry\'s most-respected loudspeakers.
Another DSP function that was developed by Klark Teknik is the Spatial Contour Control (SCC), allowing you to optimise the iQ15\'s frequency response for the physical speaker placement. This advanced function not only adds versatility, it provides accurate frequency compensation for stand, floor, wall or ceiling placement, much like the adjustments commonly found on studio monitors.
An onboard USB port delivers access for remote control of the iQ15 via PC computer, as well as DSP and speaker modelling firmware updates.
Ultranet Technology
Turbosound\'s proprietary Ultranet technology provides the ability to use CAT5 cables for transmitting pristine multi-channel audio signals and other information between Ultranet-enabled products - such as digital mixers, powered loudspeakers, and personal monitor systems. This digital distribution networking not only eliminates the potential for RFI and crosstalk that\'s typically found in analogue methods, but also significantly reduces the setup and installation time required.
Features
- 2 way full range loudspeaker for portable PA and installation applications
- 2,500 Watt power featuring KLARK TEKNIK Class-D technology
- KLARK TEKNIK Digital Signal Processing for total system control
- Speaker modelling includes accurate models of industry standard speakers
- SCC (Spatial Contour Control) compensates frequency response in relation to physical speaker placement
- ULTRANET digital audio networking connects to mixers and other sources
- 15" low frequency driver with low mass voice coil for improved transient response
- High temperature 1" compression driver with copper-clad aluminium voice coil for extended high frequency reproduction
- Fully featured user interface with LCD display for ease of navigation
- PC remote control software downloadable at turbosound.com
- Lightweight fibre glass reinforced composite enclosure
- Rugged powder coated perforated steel mesh grille
- Dual angle pole mount for accurate audience coverage
- Multiple internal rigging points for installation applications
- Mains input and link output on Neutrik powerCON* connectors
- Designed and engineered in England
|
Inside our rigid custom designed cabinet is a 15" driver designed exclusively for this project. It's matched with a new 1.75" Titanium high frequency driver, aimed through a 1" diameter horn. The dB500a features 500 watts of clean power (400 watts low frequency/100 watts high frequency) and has a crossover designed for high SPL. Our exclusive Optimax(TM) signal processing circuitry provides total speaker protection but won't cut the low end at high volumes, as similar speakers with sliding filters do.
The back panel has a built-in mixer-like preamp section with mic and line inputs, XLR connectors and level controls. Controls for the selectable low pass filter and Optimax processing are also included.
The dB500a speaker cabinet features an array of mounting options. Designed with floor monitoring in mind, they are also easily stacked or permanently installed. A 1 3/8" pole receptacle is built in, and 10 reinforced fly points are available.
| 2-Way Active Bi-amplified Speaker. Simplicity is the core of the project for this loudspeaker enclosure with its unique and innovative design. Flexible, rapid and safe assembling in fixed and mobile installations thanks to the 6 fly points included in the cabinet shape and to the very low weight. Ideal for use as main system for music performances, theatre, P.A, or as a stage monitor, W17As is an exceptionally accurate, highly versatile system, providing a rich and broad range of sound experiences in the most diverse situations.
- High sound pressure levels without distortion.
- Precise and detailed acoustic image.
- 130 dB max SPL.
- 2, class AB, Mosfet amplifiers delivering a total output power of 600 Watts (LF 450 W, HF 150 W).
- 2 indipendent dedicated dynamic processors.
- Active cross-over filter (24 dB/oct Linkwitz-Riley, 1000 Hz).
- 15" high efficiency woofer, with lightweight neodymium magnet assembly and 3" voice coil.
- 1,4" compression driver with 2.5" voice coil and titanium diaphragm.
- 60° x 40° constant directivity horn.
- Robust, lightweight and compact cabinet, made from HD polyethylene by rotational molding and equipped with two side handles for easy carry and set-up and with a stand adapter.
- Unique and innovative design which includes 6 sturdy fly points (patented) completely integrated in the cabinet and designed to hang or angle the speaker in the air as required, using any type of hook available on the market.
- The cabinet\'s shape allows for both vertical and horizontal installation (for use as stage monitor).
- Ergonomically designed side handles for easy transportation and set-up.
APPLICATIONS
- Voice reinforcement system.
- Stage monitor.
- Theatrical sound reinforcement.
- Night clubs.
- Ballrooms.
- Conference centers, presentations.
- Houses of worship.
- Small to medium/large-sized main sound reinforcement systems.
- Fill-in and side-fills in larger PA systems. | Features
400 Watt digital bi-amplification
128 dB max spl
Wide dispersion 90 x 60 constant directivity horn
15" High power woofer, 2.5" voice coil
1" Mylar dome, high frequency driver
DSP processing, boost eq, soft limiter and protection
Xlr/jack input, xlr signal output
Acoustical Specifications
Frequency Response -3 dB: 50 Hz ÷ 20 kHz
Max SPL: 128 dB
Horizontal coverage angle: 90°
Vertical coverage angle: 60°
Compression Driver: 1" 1.4" voice coil
Woofer: 15" 2.5" voice coil
Input/Output Section
Input signal: bal/unbal
Input connectors: xlr-Jack
Output connectors: xlr
Processor Section
Crossover frequencies: 1800 Hz
Limiter: Fast limiter, RMS limiter
Controls: Flat, Boost
Amplifier Specifications
Total power: 400 W
High frequencies: 100 W
Low frequencies: 300 W
Connections: VDE
Cabinet
Cabinet Material: Composite PP
Hardware: 2 x M10 flying points
Handles: 1 on top, 2 on sides
Pole Mount/Cap: yes
Grille: steel
Colour: Anthracite grey
Physical Specifications
Height: 708/27.8 mm/inch
Width: 437/17.2 mm/inch
Depth: 389/15.3 mm/inch
Net Weight: 18.2/40.12 kg/lbs |
Specification Detail
Powered Yes
Power Configuration Bi-amped
LF Driver Size 15“
LF Driver Power Amp 500W Class D
HF Driver Size 1.75“
HF Driver Power Amp 500W Class D
Frequency Range 44Hz-20kHz (-10dB)
Crossover Frequency 2kHz
Maximum Peak SPL 133dB
Horizontal Coverage Angle 60 Degrees Axisymmetric
Vertical Coverage Angle 60 Degrees Axisymmetric
Enclosure Material 15mm Birch Plywood
Mounting Options Pole, Fly
Inputs 1 x Combo (XLR/TRS, Mic/Line), 1 x Combo (XLR/TRS, Line), 2 x RCA
Outputs 2 x XLR (Direct), 1 x XLR (Line)
Height 32.1“
Width 17.5“
Depth 15.2“
Weight 64 lbs.
Manufacturer Part Number KW152 |
he das Audio dr speaker range combine the best of lightweight portability with premium quality sound performance and high output capabilities. The Dr 15a is a very portable self-powered system with an extremely efficient 15" woofer that is capable of a seriously impressive and very punchy bass & mid range output. A custom m-34 compression driver handles high frequency reproduction with a clean, smooth and dynamically transparent clarity. Each driver is powered directly by its own perfectly matched independent amplifier in this bi-amplified active system for maximum efficiency and incredible sound pressure levels. A built-in two-channel mixer comprises both microphone and line inputs, allowing for use in any format, with or without additional mixer or audio sources. Manufactured and designed by das, in Spain, the dr are constructed using the latest in, mechanics, magnetics, acoustics and electronics technology to create speakers that are tough, reliable and capable out performing any rival model their class.
TECHNICAL SPECIFICATIONS:
Mobile DJ, disco, PA or install use
200 Watt active speaker
Nominal LF power amplifier 150 Watt (AB)
Nominal HF power amplifier 50 Watt (AB)
127dB SPL
45Hz - 20kHz frequency range (-dB)
2 way
15" woofe speaker
1" compression driver
Female XLR-Jack input
LOOP THRU : Jack
Input Impedance line : 20 kohms; mic : 2 kohms
Polypropylene enclosure
35mm integral pole mount fitting
Black finish
Weight: 23.4kg (including packaging)
Height: 70.0cm x Width: 45.0cm x Depth: 36.0cm
Warranty: 12 months
Power: 240V / 110V Switchable
|
Reviews
There are no reviews yet.