TURBOSOUND iQ15 15” 2-Way Active Loudspeaker 2500W RMS

873.00 incl. GR VAT

Available on backorder

EAN: N/A
Installments calculation
CompareAdd to wishlist Submit Better Price
The Turbosound iQ15 PA Loudspeaker is perfect for a wide range of portable and fixed installation applications. The iQ15 features a 15\’\’ low frequency driver with a low mass voice coil and a 1\’\’ compression driver, this combination delivers improved transient responses as well as crystal clear, extended high frequency sound reproduction. This powered loudspeaker […]

 

Read more

The Turbosound iQ15 PA Loudspeaker is perfect for a wide range of portable and fixed installation applications. The iQ15 features a 15\’\’ low frequency driver with a low mass voice coil and a 1\’\’ compression driver, this combination delivers improved transient responses as well as crystal clear, extended high frequency sound reproduction. This powered loudspeaker also comes equipped with premium features that include extensive yet simple to use DSP controls, Spatial Contour Control (SCC), Ultranet digital audio networking and a user-friendly LCD display.

Intuitive Rear Panel

The rear panel houses a fully featured interface that includes a LCD display, Channel A/B gain control and a single rotary encoder for intuitive access to level, EQ, Speaker modelling, SCC, Subwoofer integration and Feedback Control (FBI). The rear panel also features two balanced XLR inputs, balanced XLR outputs for each of the two independent channels, a Mix output XLR connector and level control with a signal LED on each channel.

Extensive but Simple DSP Control

The iQ15 active speaker is equipped with a sophisticated but easy to use Klark Teknik Digital Signal Processor (DSP), which provides a dynamic EQ for incredible full range responses and transparent limiting for the utmost clarity at high output levels, as well as long-term reliability. The advanced DSP also includes speaker modelling presets that consist of detailed and accurate models of some of the audio industry\’s most-respected loudspeakers.

Another DSP function that was developed by Klark Teknik is the Spatial Contour Control (SCC), allowing you to optimise the iQ15\’s frequency response for the physical speaker placement. This advanced function not only adds versatility, it provides accurate frequency compensation for stand, floor, wall or ceiling placement, much like the adjustments commonly found on studio monitors.

An onboard USB port delivers access for remote control of the iQ15 via PC computer, as well as DSP and speaker modelling firmware updates.

Ultranet Technology

Turbosound\’s proprietary Ultranet technology provides the ability to use CAT5 cables for transmitting pristine multi-channel audio signals and other information between Ultranet-enabled products – such as digital mixers, powered loudspeakers, and personal monitor systems. This digital distribution networking not only eliminates the potential for RFI and crosstalk that\’s typically found in analogue methods, but also significantly reduces the setup and installation time required.

Features

  • 2 way full range loudspeaker for portable PA and installation applications
  • 2,500 Watt power featuring KLARK TEKNIK Class-D technology
  • KLARK TEKNIK Digital Signal Processing for total system control
  • Speaker modelling includes accurate models of industry standard speakers
  • SCC (Spatial Contour Control) compensates frequency response in relation to physical speaker placement
  • ULTRANET digital audio networking connects to mixers and other sources
  • 15″ low frequency driver with low mass voice coil for improved transient response
  • High temperature 1″ compression driver with copper-clad aluminium voice coil for extended high frequency reproduction
  • Fully featured user interface with LCD display for ease of navigation
  • PC remote control software downloadable at turbosound.com
  • Lightweight fibre glass reinforced composite enclosure
  • Rugged powder coated perforated steel mesh grille
  • Dual angle pole mount for accurate audience coverage
  • Multiple internal rigging points for installation applications
  • Mains input and link output on Neutrik powerCON* connectors
  • Designed and engineered in England
Weight 30.60 kg

Reviews

There are no reviews yet.

Be the first to review “TURBOSOUND iQ15 15” 2-Way Active Loudspeaker 2500W RMS”

Your email address will not be published. Required fields are marked *

Quick Comparison

TURBOSOUND iQ15 15'' 2-Way Active Loudspeaker 2500W RMS removeMONTARBO W17As MONITOR ACTIVE 15'' 600W removeBEHRINGER B215D Active Speaker 345W RMS removeWHARFEDALE TITAN 15 ACTIVE TWO-WAY SPEAKER removeRCF ART 415-A Active speaker system 15" + 1", 400W removeELECTRO VOICE zxA5-90B 2 WAY LOUDSPEAKER 1000W remove
NameTURBOSOUND iQ15 15'' 2-Way Active Loudspeaker 2500W RMS removeMONTARBO W17As MONITOR ACTIVE 15'' 600W removeBEHRINGER B215D Active Speaker 345W RMS removeWHARFEDALE TITAN 15 ACTIVE TWO-WAY SPEAKER removeRCF ART 415-A Active speaker system 15" + 1", 400W removeELECTRO VOICE zxA5-90B 2 WAY LOUDSPEAKER 1000W remove
Image
SKUE008039MONTARBO W17AsE005240TITAN15ACTIVEART415A001989
Rating
Price 873.00 incl. GR VAT2,000.00 incl. GR VAT 365.00 incl. GR VAT 736.75 incl. GR VAT 764.15 incl. GR VAT 1,940.00 incl. GR VAT
Stock

Available on backorder

Available on backorder

Available on backorder

In stock

Only 1 left in stock (can be backordered)

Available on backorder

AvailabilityAvailable on backorderAvailable on backorderAvailable on backorderIn stockOnly 1 left in stock (can be backordered)Available on backorder
Add to cart

Add to cart

Add to cart

Add to cart

Add to cart

Add to cart

Add to cart

Description
Content

The Turbosound iQ15 PA Loudspeaker is perfect for a wide range of portable and fixed installation applications. The iQ15 features a 15\'\' low frequency driver with a low mass voice coil and a 1\'\' compression driver, this combination delivers improved transient responses as well as crystal clear, extended high frequency sound reproduction. This powered loudspeaker also comes equipped with premium features that include extensive yet simple to use DSP controls, Spatial Contour Control (SCC), Ultranet digital audio networking and a user-friendly LCD display.

Intuitive Rear Panel

The rear panel houses a fully featured interface that includes a LCD display, Channel A/B gain control and a single rotary encoder for intuitive access to level, EQ, Speaker modelling, SCC, Subwoofer integration and Feedback Control (FBI). The rear panel also features two balanced XLR inputs, balanced XLR outputs for each of the two independent channels, a Mix output XLR connector and level control with a signal LED on each channel.

Extensive but Simple DSP Control

The iQ15 active speaker is equipped with a sophisticated but easy to use Klark Teknik Digital Signal Processor (DSP), which provides a dynamic EQ for incredible full range responses and transparent limiting for the utmost clarity at high output levels, as well as long-term reliability. The advanced DSP also includes speaker modelling presets that consist of detailed and accurate models of some of the audio industry\'s most-respected loudspeakers.

Another DSP function that was developed by Klark Teknik is the Spatial Contour Control (SCC), allowing you to optimise the iQ15\'s frequency response for the physical speaker placement. This advanced function not only adds versatility, it provides accurate frequency compensation for stand, floor, wall or ceiling placement, much like the adjustments commonly found on studio monitors.

An onboard USB port delivers access for remote control of the iQ15 via PC computer, as well as DSP and speaker modelling firmware updates.

Ultranet Technology

Turbosound\'s proprietary Ultranet technology provides the ability to use CAT5 cables for transmitting pristine multi-channel audio signals and other information between Ultranet-enabled products - such as digital mixers, powered loudspeakers, and personal monitor systems. This digital distribution networking not only eliminates the potential for RFI and crosstalk that\'s typically found in analogue methods, but also significantly reduces the setup and installation time required.

Features
  • 2 way full range loudspeaker for portable PA and installation applications
  • 2,500 Watt power featuring KLARK TEKNIK Class-D technology
  • KLARK TEKNIK Digital Signal Processing for total system control
  • Speaker modelling includes accurate models of industry standard speakers
  • SCC (Spatial Contour Control) compensates frequency response in relation to physical speaker placement
  • ULTRANET digital audio networking connects to mixers and other sources
  • 15" low frequency driver with low mass voice coil for improved transient response
  • High temperature 1" compression driver with copper-clad aluminium voice coil for extended high frequency reproduction
  • Fully featured user interface with LCD display for ease of navigation
  • PC remote control software downloadable at turbosound.com
  • Lightweight fibre glass reinforced composite enclosure
  • Rugged powder coated perforated steel mesh grille
  • Dual angle pole mount for accurate audience coverage
  • Multiple internal rigging points for installation applications
  • Mains input and link output on Neutrik powerCON* connectors
  • Designed and engineered in England
2-Way Active Bi-amplified Speaker. Simplicity is the core of the project for this loudspeaker enclosure with its unique and innovative design. Flexible, rapid and safe assembling in fixed and mobile installations thanks to the 6 fly points included in the cabinet shape and to the very low weight. Ideal for use as main system for music performances, theatre, P.A, or as a stage monitor, W17As is an exceptionally accurate, highly versatile system, providing a rich and broad range of sound experiences in the most diverse situations. - High sound pressure levels without distortion. - Precise and detailed acoustic image. - 130 dB max SPL. - 2, class AB, Mosfet amplifiers delivering a total output power of 600 Watts (LF 450 W, HF 150 W). - 2 indipendent dedicated dynamic processors. - Active cross-over filter (24 dB/oct Linkwitz-Riley, 1000 Hz). - 15" high efficiency woofer, with lightweight neodymium magnet assembly and 3" voice coil. - 1,4" compression driver with 2.5" voice coil and titanium diaphragm. - 60° x 40° constant directivity horn. - Robust, lightweight and compact cabinet, made from HD polyethylene by rotational molding and equipped with two side handles for easy carry and set-up and with a stand adapter. - Unique and innovative design which includes 6 sturdy fly points (patented) completely integrated in the cabinet and designed to hang or angle the speaker in the air as required, using any type of hook available on the market. - The cabinet\'s shape allows for both vertical and horizontal installation (for use as stage monitor). - Ergonomically designed side handles for easy transportation and set-up. APPLICATIONS - Voice reinforcement system. - Stage monitor. - Theatrical sound reinforcement. - Night clubs. - Ballrooms. - Conference centers, presentations. - Houses of worship. - Small to medium/large-sized main sound reinforcement systems. - Fill-in and side-fills in larger PA systems.
  • High-power 550-Watt 2-way PA sound reinforcement speaker system for live and playback applications
  • Ultra-compact and light weight system delivers excellent sound even at extreme sound pressure levels
  • Revolutionary Class-D amplifier technology: enormous power, incredible sonic performance and super-light weight
  • Internal switch-mode power supply for noise-free audio, superior transient response and very low power consumption
  • Integrated sound processor for ultimate system control and speaker protection
  • Extremely powerful 15'' long-excursion driver provides incredibly deep bass and acoustic power
  • State-of-the-art 1.35'' aluminum-diaphragm compression driver for exceptional high-frequency reproduction
  • Ultra-wide dispersion, large-format exponential horn
  • Ultra-low noise Mic/Line input with Volume control and Clip LED
  • Dedicated 2-band EQ for perfect sound adjustment
  • Additional Line output allows linking of additional speaker systems
  • Versatile trapezoidal enclosure design allows different positioning:
  • - Stand mounting with 35-mm pole socket
  • - Tilts on its side for use as a floor monitor
  • Ergonomically shaped handles for easy carrying and setup
  • High-quality components and exceptionally rugged construction ensure long life
  • Conceived and designed by BEHRINGER Germany
Thanks to our revolutionary Class-D amplifier technology and internal switch-mode power supplies, EUROLIVE D Series loudspeakers provide a much better power-to-weight ratio than competing active speakers. Put simply, you get all the power without the back-breaking weight. And the sound quality of these lightweight loudspeakers exceeds that of our extremely popular EUROLIVE B212A and B215A systems — plus we've included two 200-Watt models, the B210D (10“) and B208D (8“) for less demanding applications.
Due to their high-efficiency design, they crank out 550/200 of the cleanest, punchiest audio Watts you've ever heard from a compact loudspeaker system. The integrated sound processor provides total system control, along with dependable protection of the LF and HF transducers, thanks to the built-in active high-pass filter, which virtually eliminate distortion — even at extreme operating levels. In addition, all four models feature an Ultra-Low Noise (ULN) Mic/Line input with LEVEL control and a dedicated 2-band EQ (bass/treble) for easy control.
Intelligent by Design One of the coolest things about active loudspeakers is the lack of back-breaking racks of amps, crossovers and EQs that are often required to make passive speaker systems sound almost as good. But that comes with a trade-off — that extra weight is transferred to the loudspeaker, making it difficult for a single user to heave all that mass onto the top of a speaker stand.
BEHRINGER's D Series' "Intelligent-Design" merges the best features of active loudspeakers with significantly lower weight by using switch-mode power supplies and Class-D amplifi er topology.
Hidden deep inside each enclosure is the equivalent of an active 2-way electronic crossover, graphic EQ, parametric EQ, mic preamp, limiter and two Class-D power amplifiers, yet overall weight is less than comparable loudspeaker systems! These components work together seamlessly to provide optimum sound quality — and it all takes place automatically, without you having to touch a single knob.
Class D Amplifier Technology Delivers High Power With Low Weight. Instead of operating relatively continuously like Class AB circuits, Class D amps switch on and off thousands of times per second, delivering power only when needed. In other words, the amplifier is either fully on or fully off , which significantly reduces the power losses in the output devices. This is easy in theory and complex in practice, which is why there are so many different Class D designs. Without boring you with terms like PWM Generation and Gate Drivers, let's just say that to realize the benefits of a Class D design requires compensating for a lot of potential problems that can cause audible distortion. BEHRINGER didn't invent Class D technology, but our R&D Department has been working for years to perfect our own version with all the benefits of reduced weight and cool running, and none of the drawbacks. That's why we invested over a solid year of research time eliminating pitfalls like quantizing errors and excess dead time, selecting just the right switching frequency (and other equally tech-y terms). And why we spent an equally long time testing individual components to ensure they will stand up to the rigors of the real world.
When combined with switching-mode power supplies that replace heavy toroid transformers, our new designs provide more dynamic punch since the higher switching frequency reloads the supply's capacitors much faster. And, because they are so much more efficient, the D Series runs cooler and doesn't require huge, heavy heat sinks. The resulting speakers systems are much lighter, making them easy to transport and set up. Our no-compromise design means your D Series active loudspeakers will deliver full power and incredible fidelity all night long, with no need for rest cycles.
Instant PA System With just a single D Series loudspeaker system and a microphone or MP3 player, you can set up an instant sound system. Thanks to the built-in preamp section, you just connect a dynamic mic and raise and lower the volume with the Level control. Plug in your sound source, place the speaker on a tabletop or stand, and power up. It's just that easy. And if you need more coverage, simply use the convenient LINK OUTPUT XLR connector to add more active loudspeakers. Stereo Music System You can even use two D Series enclosures for stereo playback of your MP3, CD or old-skool cassette deck without any additional hardware. Just plug the appropriate stereo "breakout" adapter into your deck's output jack and run the cables to the 1/4" inputs on each loudspeaker. Set the Level and EQ controls the same on both enclosures. Voilà, instant party!
Marvelous Monitoring Thanks to their trapezoidal design, these cabinets can be laid on their side providing the ideal angle for onstage monitor wedge applications. Hookup is simple, requiring only a single XLR or 1/4" cable from the monitor send on your mixing console and, of course, power. Additional monitors can be chained together via the XLR LINK OUTPUT jack on the rear panel.
Custom-Designed Transducers Let's face it; the transducers (woofers and tweeters) are the only part of a sound system you actually hear, so we don't cut any corners. While some of our competitors are content to buy off-the-shelf transducers and plug them into their boxes, we custom-design and build our transducers from scratch. Not only do we wind our own voice coils, we process the paper pulp into cones and even machine our own backplates. This enables us to control the quality, and frankly, make better components, like the long-excursion LF transducers and state-of-the-art 1.35" compression drivers we deploy in each and every EUROLIVE enclosure. Low Frequency Response The EUROLIVE D Series was built with extended low frequency handling in mind. With a tuned port, internally braced, injection molded enclosure, each model's custom-designed LF transducer (woofer) really cranks out tight low end. Keep in mind that bass response varies according to LF transducer size, so the larger the speaker, the more bass you will be able to generate. Accurate Non-Fatiguing Midrange and Treble Even if your particular application doesn't include booming bass, you'll love the sheer accuracy of these loudspeakers. Over a year of design went into a exponential horn/aluminum dome compression driver combination that could do justice to loud hard rock or dance music — yet could also satisfy audiophiles with its musical timbre and attention to detail. For spoken word, singing or acoustical instruments, they are un-matched for being able to articulate complex harmonic details. In fact, many customers think it's the most natural-sounding speaker they've ever heard at anywhere near the price.
Processor Controlled Output Dynamic processing is one of the best ways to maximize output without sacrificing sound quality. The D Series' built-in circuitry automatically adjusts program content, allowing the loudspeaker to operate at extreme levels. It accomplishes this by reducing bass output slightly as you approach the limit of the transducers. This frees up LF amp and transducer resources, so that higher overall volume can be realized. It's like having a tiny soundman inside each cabinet constantly monitoring and changing output parameters. By making subtle changes to the crossover frequency and the audio content, the system is able to crank out more sound — without the slightest hint of distortion.
Massive Power to Size Ratio Cutting-edge technology and high-fidelity speakers are not all it takes to get your message across — you need power, and lots of it. At the heart of each EUROLIVE D Series loudspeaker are two high-current amplifiers with a total output of 550-Watts for the B212D/B215D and 200-Watts for the B210D/B208D. They're capable of driving the speakers to their maximum with no distortion — and without speaker damage, thanks to active internal protection circuits. Put simply, they will astound you with their massive punch, smooth mids and articulate top-end! Which Speaker do I Need? As you've probably noticed, we make these active loudspeakers in four different woofer sizes. Which one is right for you?
Well, let's start with your application. Is it spoken word in a hotel ballroom? Hard rock in a park? A folk singer or a drum 'n' bass DJ? Loud enough for an 18-year old or loud enough for your grandmother? A huge auditorium or a tiny club? Physics are physics and a 15" low frequency transducer has almost 40% more surface area with which to move air than a 12“. A 12" has 30% more area than a 10“, and a 10" has 35% more than an 8“. So the easiest answer is "Whether to choose one speaker cabinet over another depends on your bass requirements." If you're addressing a small meeting, or demoing the latest "slice-o-chop-o-vegamatic" at the swap meet or county fair, the B208D might be all the speaker you'll need. But if you're providing disco to the masses at a standing room only nightclub — or you just need to crank it up louder, then the B215D may be a better choice.
As you can see, "Bass requirements" isn't quite as easy an answer as it sounds. The larger a room's cubic volume, the more energy is required to achieve a given level of bass. In other words, when playing the same tune in a big room versus a small room, big room = less bass; small room = more bass. Confused yet? We suggest that you consult your BEHRINGER dealer for more advice on this subject, which is also a good time to do a listening test —against their competition and against each other. Judge for yourself. And then own BEHRINGER with money to spare.
Frequency response +/- 3db 50-20kHz
HF SECTION
Hf type Titanium Compression Driver
Horn dispersion (H x V) 90° x 60°
Hf exit size mm / inches 25mm / 1“
PHYSICAL FEATURES
Enclosure Material Injection Moulded Polypropylene
Enclosure Colour Grey or White or Black
Size (mm/inches) 381mm / 15“
IN / OUT PANEL (speaker Level)
Input connector XLR - 1/ 4" Combo jack
AMPLIFIER POWER
Power On Protection Power switch on / off mute
Thermal Protection Amplifier shutdown, auto reset
Low Line Voltage Shut Down 60% Nominal line voltage
Driver Protection Independent LF and HF limiters
DC Protection Yes
Short Protection Yes
Controls High (±10dB) 10kHz Shelving
Dimensions (HxWxD)
mm 708.3mm x 477.8mm x 401.77mm
inches 27.9" x 18.8" x 15.8“
Microphone / Transmitter
Maximum Input Level +22dBu
Impedance 4 Ω
MIXER MODEL
INPUT IMPEDANCE Balanced: 20k ohms Unbalanced: 10k ohms
Clip Limiter Turns on approx 350W output
Limiter Indicator Red LED
Power Indicator Red LED
AC Power details
Power Supply High Efficiency Switching Mode Power Supply
AC Power Options AC100~120V / 220~240V, 50 / 60Hz
Power On Indicator LED
Rigging / Bracket / 10 M8 threaded inserts including 4
Mounting Options M8 threaded inserts on bottom in OmniMount 60.0-type footprint Pole-mount receptacle with lock screw 2 carry handles (one on each side) Optional wall-mount bracket
Impedance Balanced Balanced: 1k ohm - Unbalanced: 500 ohm
Line Output
Line Output Connector Switchable LOOP / MIX Balanced Male XLR
Input A - type Switchable balanced mic or line level input
Input Sensitivity Mic: -36dBu (-38.2dBv or 12.28mVrms)
Line: +4dBu (1.78dBv or 1.228Vrms)
Maximum Input Level +22dBu
Input Connector XLR - 1/ 4" Combo jack
Input Impedance Balanced: 20k ohms Unbalanced: 10k ohms
Input B - type Line level input
Input Sensitivity XLR - 1/4" Combo jack: 1.78dBv or 1.228Vrms
RCA: 0dBu (-2.2dBv or 0.775Vrms)
Maximum Input Level +22dBu
Input Connectors Combo jack: 1/4" - XLR / Summed dual RCA jacks
Bass Response Optimizer
(“BRO“™) circuit +5dB at 60Hz
Subsonic Filter 30Hz, Second-order filter
Amplifiers
Low-Frequency (Class D) Rated 350W RMS, 700W Peak
High- Frequency (Class A/B) Rated 70W RMS, 140W Peak
Electronic Crossover 24dB/octave Linkwitz-Riley
Crossover Frequency 1.8kHz
Controls High (±10dB) 10kHz Shelving
Equalization Low (±10dB) 100Hz Shelving
DIMENSIONS & WEIGHT
Net weight ( kg / lbs ) 23.7kg / 52.67lbs
Gross weight ( kg / lbs ) 26.94kg / 59.27lbs
Features 400 Watt digital bi-amplification 128 dB max spl Wide dispersion 90 x 60 constant directivity horn 15" High power woofer, 2.5" voice coil 1" Mylar dome, high frequency driver DSP processing, boost eq, soft limiter and protection Xlr/jack input, xlr signal output Acoustical Specifications Frequency Response -3 dB: 50 Hz ÷ 20 kHz Max SPL: 128 dB Horizontal coverage angle: 90° Vertical coverage angle: 60° Compression Driver: 1" 1.4" voice coil Woofer: 15" 2.5" voice coil Input/Output Section Input signal: bal/unbal Input connectors: xlr-Jack Output connectors: xlr Processor Section Crossover frequencies: 1800 Hz Limiter: Fast limiter, RMS limiter Controls: Flat, Boost Amplifier Specifications Total power: 400 W High frequencies: 100 W Low frequencies: 300 W Connections: VDE Cabinet Cabinet Material: Composite PP Hardware: 2 x M10 flying points Handles: 1 on top, 2 on sides Pole Mount/Cap: yes Grille: steel Colour: Anthracite grey Physical Specifications Height: 708/27.8 mm/inch Width: 437/17.2 mm/inch Depth: 389/15.3 mm/inch Net Weight: 18.2/40.12 kg/lbs

Specifications

  • LF Amplifier Power (RMS): 1000 watts
  • HF Amplifier Power (RMS): 250 watts
  • Frequency Response (-3dB): 58-18000 Hz
  • Frequency Response (-10dB): 50-20000 Hz
  • Max. SPL/1m (calc); half space: 133 dB
  • Coverage (nominal -6dB) Horizontal: 90°
  • Coverage (nominal -6dB) Vertical: 50°
  • LF Transducer: DVX3150
  • HF Transducer: ND2
  • Crossover Frequency: 1500 Hz
  • Enclosure Material: Polypropylene
  • Flying: Yes
  • Input Connections: XLR
  • Chassis Size: 15“
  • Speaker Type: Full-range, powered monitors, poweredspeakers, two-way wedges
  • Weight (net): 50.49 lbs
  • Dimensions (H x W x D): 27.24" x 17.56" x 16.18“
Weight30.60 kg15.00 kg21.00 kg26.94 kg18.20 kg22.60 kgDimensionsN/AN/AN/AN/AN/AN/AAdditional information
Weight 30.60 kg
Weight 15.00 kg
Weight 21.00 kg
Weight 26.94 kg
Weight 18.20 kg
Weight 22.60 kg