TURBOSOUND iX12 12” Active PA Speaker 1000W RMS

The Turbosound iX12 Active PA Speaker is the perfect loudspeaker for a variety of professional and portable applications. Featuring a 12\'\' low-frequency woofer and a 1\'\' titanium dome compression tweeter, the Turbosound iX12 delivers accurate audio reproduction with exceptional transient responses and crystal-clear highs. The iX12 speaker is equipped with a 3-channel digital mixer which provides DSP presets, Bluetooth connectivity and XLR/TRS combo input connectors. Complete with a KLARK TEKNIK amplifiers and a durable moulded enclosure, the Turbosound iX12 active speaker offers intuitive setup and reliable operation.

The Turbosound iX12\'s onboard 3-channel digital mixer features balanced and unbalanced TRS/XLR combo input connectors, allowing you to connect a variety of sources such as dynamic microphones and line-level instruments. The intuitive control interface has an LCD display and a rotary push-encoder, providing you with complete control over DSP functions and recallable gain. All of these settings can also be controlled remotely using the free iOS app, providing you with the freedom to adjust any setting from your iPhone/iPad.

• 2-way full range, powered loudspeaker for portable PA applications
• KLARK TEKNIK class-D amplifier with 1000-watt output
• Comprehensive remote control via iOS devices
• High quality Bluetooth stereo audio streaming
• Onboard 3-channel digital mixer with gain setting recall
• DSP presets for application type and speaker positioning
• 12" low frequency driver with low mass voice coil for improved transient response
• Titanium dome 1" compression driver for extended high frequency reproduction
• Intuitive single rotary control user interface with LCD display for ease of navigation
• Durable lightweight moulded enclosure
• Rugged powder coated perforated steel mesh grille
• Dual angle pole mount for optimum audience coverage
• Designed and engineered in the U.K

• Frequency Response: 50Hz - 20kHz, ±3dB
• Nominal Dispersion: 80° x 60° (H x V)
• Sound Pressure Level: 125dB
• Crossover Type: Active
• Low-Frequency Driver: 12\'\' Woofer
• High-Frequency Driver: 1\'\' Titanium Dome Compression Driver
• Amplifier Power: 1000W
• Amplifier type: KLARK TEKNIK
  • Low-Frequency: Class-D
  • High-Frequency: Class-AB
• Input Connectors: 2 x Combo XLR/Jack
• Input Impedance: 16k Ohms, Unbalanced / 33k Ohms, Balanced
• Output Connector: XLR
• Bluetooth: 4.0 Dual Mode
• Bluetooth Range: 35m (Without Interference)
• Control: Rotary Push-Encoder
• EQ: Bass and Treble
• Crossover: High-Pass L-R 24dB/Oct
• Display: LCD 128 x 32, Blue, Backlit
• Limiter: Independent HF and LF
• Power Consumption: 80W
• Dimensions: 609mm x 370mm x 370mm / 24\'\' x 14.5\'\' x 14.5\'\' (H x W x D)
• Weight: 19.4kg / 42.8lbs

Product Features:

High-Power 1000-Watt 2-way PA sound reinforcement speaker system for live and playback applications
Ultra-compact and lightweight system delivers excellent sound even at extreme sound pressure levels
"Wireless-ready" for high-quality BEHRINGER digital wireless system (not included)
2-channel mixer with individual Mic/Line inputs, Volume controls and Clip LEDs
Dedicated 2-band EQ plus integrated sound processor for ultimate system control and speaker protection
Revolutionary Class-D amplifier technology: enormous power, incredible sonic performance and super-light weight
Extremely powerful 12'' long-excursion driver provides incredibly deep bass and acoustic power
state-of-the-art 1" phenolic-diaphragm compression driver for exceptional high-frequency reproduction
Ultra-wide dispersion, large-format exponential horn
Additional Line output allows linking of additional speaker systems
Versatile trapezoidal enclosure design allows different positioning:
- Stand mounting with 35-mm pole socket
- Tilts on its side for use as a floor monitor
Ergonomically shaped handles for easy carrying and setup
High-quality components and exceptionally rugged construction ensure long life
Conceived and designed by BEHRINGER Germany

 User's Manual

Key Features:
- Compact Powered bi-amplified
full-range loudspeaker with JBL
DrivePack® technology for portable or
installed use
- Optimized for both portable/rental or
permanent-venue use
- 1750 watts peak output power,
875 watts continuous
- 12-inch Differential Drive® lowfrequency
driver for extended lowfrequency
output
- Robust powder-coated die cast
aluminum handles, designed for
strength and comfort
- Integrated 35 mm stand mount

Specifications:
Frequency Response (+/-3 dB): 65 Hz - 18 kHz80 Hz – 20 kHz
Frequency Range (-10 dB): 55 Hz - 20 kHz50 Hz – 20 kHz
Coverage Pattern: 90° x 50°
Directivity Factor (Q): 12.6
Directivity Index (DI): 11 dB
Maximum Peak Output1: 134 dB SPL 1m
Transducer Section:
Low Frequency Section: JBL 2262FF, 304 mm (12 in) dia., 76 mm (3 in) Dual Coil
neodymium Differential Drive®, Direct Cooled
Bandpass Nominal Impedance: 2 x 2 ohms
High Frequency: JBL 2452H-SL, 100 mm (4 in) titanium damped
diaphragm, 1.5 in. exit.
Bandpass Nominal Impedance: 8 ohms
System:
DPC1 Internal Amplification Output
(at nominal load) 1750 Watts Peak, 875 Watts Continuous
DPC1 Output (Continuous IEC shaped
pink noise into rated load impedance): 750LF/125HF Watts
DPC1 Output Section: LF: Dual Bridged Technology™, Class D
HF: Bridged Class D
Audio Input connector XLR with loop-through
User Controls: 80 Hz Subwoofer High Pass Filter. Enable/Disable
0-16 dB input Attenuator with 32 precision 0.5 dB steps
Signal Processing: DSP based, resident in Input Module.
System Management: DSP based limiters for mechanical and thermal
protection
AC Power Operating Range: 90-132 VAC/216-264 VAC, 50/60 Hz
AC Line Voltage: 50/60 Hz; User Selectable; 120V/240V (-15%, +10%)
AC Input Connector: Neutrik PowerCon (NAC 3MPA)
AC Loop-thru: Neutrik PowerCon (NAC 3MPB)
AC Current Requirement: 6A per system at 120V, 3A per system at 240V
Enclosure:
Box Construction: 5/8 in. multi-ply exterior grade Baltic birch. Internally
braced. Black DuraFlex™ finish.
Suspension System: 9 M10 Fittings + 2 M6 Fittings, 35 mm pole mount
socket
Grille: 14 Gauge Black powder-coated perforated steel with
foam backing.
Dimensions (H x W x D): 533 x 358 x 334 mm
21.0 x 14.1 x 13.1 in
Net Weight: 21.3 kg (47 lb)

Specification     Detail
Powered     Yes
Power Configuration     Bi-amped
LF Driver Size     12“
LF Driver Power Amp     500W Class D
HF Driver Size     1.75“
HF Driver Power Amp     100W Class D
Frequency Range     55Hz-20kHz (-10dB)
Crossover Frequency     1.5kHz
Maximum Peak SPL     124dB
Horizontal Coverage Angle     90 Degrees
Vertical Coverage Angle     50 Degrees
Enclosure Material     15mm Birch Plywood
Mounting Options     Pole, Fly, Wedge
Inputs     1 x XLR
Outputs     1 x XLR
Height     24“
Width     15.2“
Depth     15“
Weight     50 lbs.

• Best in class audio performance
• 2000 Watt Class-D amplifier module
• Intrinsic Correction™ tuning and  loudspeaker management
• DMT™ (Directivity Matched Transition)  design provides excellent power response and consistent performance across the listening are
• Refined, professional appearance looks great in any application
• Rugged ABS enclosure for long life and lasting durability
• Deployment in either main PA or floor monitor position

• Factory Presets and savable/recallable Scenes for commonly-used application
• Multi-function digital display for control and selection of loudspeaker functions including cross-over, EQ, delay and frequency contour
• Dual pole cup mounts (standard and 7.5 degree down-tilt)
• M10 fittings for flown applications
• Optional security panel prevents  unauthorized tampering of controls
• Complete EASE and CAD information  available online
• 6-Year Warranty (with product registration)