Content |
- 2 way full range powered loudspeaker for portable PA and installation applications
- 600 Watt power featuring KLARK TEKNIK Class-D technology
- KLARK TEKNIK Digital Signal Processing for total system control
- High excursion 10" low frequency driver with low mass voice coil for improved transient response
- 1" high temperature dome compression driver with extended high frequency reproduction
- Converging elliptical waveguide provides wide dispersion and excellent pattern control
- Speech/music switch featuring optimised equalisation for voice or music applications
- Switchable 100 Hz high pass filter for subwoofer integration
- Lightweight composite enclosure with black finish
- Rugged powder coated perforated steel mesh grille
- Dual angle pole mount for accurate audience coverage
- Multiple internal rigging points for installation applications
- 3-Year Warranty Program*
- Designed and engineered in England
Dimensions (H x W x D) | 522 x 329 x 294 mm (20.6 x 12.9 x 11.6“) | Net Weight | 13.3 kg (29.3 lbs) | Components | 1 x 10" (254 mm) LF driver, 1 x 1" (25 mm) HF compression driver | Frequency Response | 55 Hz - 18 kHz ±3 dB | Dispersion | 90 °H x 60 °V @ -6 dB points | Calculated Max SPL | 126 dB peak | Construction | Injection-moulded polypropylene enclosure. Recessed carrying handle. Integral dual-angle pole mount socket | Grille | Powder coated galvanised perforated steel mesh with foam backing | Connectors | Mic/Line input: combo jack/female XLR wired pin 2 hot
Mix out: male XLR wired pin 2 hot
IEC mains connector with integrated fuseholder | Rigging | (6) M10 threaded internal rigging points |
|
- EV QuickSmart Mobile application: quickly and wirelessly configure, control and monitor up to six ELX200 loudspeakers simultaneously, and receive immediate notification during critical performance conditions. Bluetooth® is available in select countries.
- QuickSmartDSP features best-in-class processing. Easy setup via four presets, sub/top system-match, three-band EQ, five user-programmable presets, visual monitoring of limiter status, input level control and meters, and master volume control to optimize gain structure, all via LCD.
- High-efficiency 1200 W Class-D power amplifier delivers up to 130 dB peak SPL utilizing transducers designed and engineered by EV.
- EV-patented Signal Synchronized Transducers (SST) waveguide design provides precise and consistent coverage, minimal distortion, and maximized acoustical loading.
- Professional-grade hardware: three M10 threaded mounting points for forged eyebolts, integrated pole-mounts and the proven ZLX two-handle design for easy lifting.
ELX200-10P features high-efficiency Class-D power amplifiers (up to 1200 W) with integrated QuickSmartDSP, and delivers up to 130 dB SPL utilizing transducers designed and engineered by EV (10-inch EVS-10M woofer coupled with a DH-1C 1-inch titanium compression driver). Powered full-range models allow easy setup via four presets (Music, Live, Speech, Club), sub/top system-match crossovers, three-band EQ, five user-programmable presets (Store and Recall settings), visual monitoring of limiter status, input level control and meters, and master volume control to ensure optimal gain structure.
ELX200 powered models are ideal for portable and installed applications, with lightweight and durable polypropylene enclosures, three M10 threaded mounting points and the proven ZLX handle design for easy lifting.
The new QuickSmart Mobile wireless control and monitoring application, using Bluetooth® Low Energy (BTLE) technology, allows intuitive system control, configuration and monitoring of up to six powered ELX200 loudspeakers simultaneously. Receive alerts when your system is being overdriven, and control your system while in front of your speakers, not behind. Bluetooth® is available in select countries.
Available Color | Black | Connector Type | (1) Stereo RCA Input, (2) XLR/TRS combo jack, and (1) XLR | Coverage (Nominal -6 dB) H | 90° | Specifications | Coverage (Nominal -6 dB) V | 60° | Crossover Frequency | 1800Hz | Depth | 319mm (12.6“) | Enclosure Material | Polypropylene Composite | Family | ELX200 | Frequency Range (-10 dB) | 53 Hz – 20 kHz | Frequency Response (-3 dB) | 59 Hz – 18 kHz | Grille | 18 AWG steel with powdercoat | Height | 531mm (20.9“) | HF Transducer | DH-1C 1-inch titanium compression driver | LF Transducer | EVS-10M 254 mm (10 in) | Max. SPL/1m (calc) | 130dB | Power Consumption | 100 - 240 V~, 50 - 60 Hz, 1.8A | Power Rating | 1200W | Powered or Passive | Powered | Shipping Weight | 15.6kg (34.4 lbs) | Speaker Type | Full-Range | Suspension | (3) M10 suspension points | Weight Net | 13.5kg (29.8 lbs) | Width | 330mm (13“) | Woofer Size | 10inch |
| This highly professional 2-way active system is designed for absolute, long-term reliability. With its multi-functional bass reflex housing and finely tuned, user-friendly presets, the speakers are suitable as full-range, box, satellite and floor monitors. The STINGER® 10 A G3 is powered by a highly efficient Class-D amplifier with a powerful 300-watt continuous output. The specially developed 10" woofer and a BMS tweeter driver achieve a powerful bass response and fresh, natural trebles. The wave guide of the tweeter has been developed using the Boundary Element Method (BEM), a numerical simulation of the sound radiation and dispersion. It reduces reflection from floors and ceilings and prevents sidelobe levels, thus achieving controlled and homogeneous dispersion. LD Systems’ proprietary DynX® DSP technology means that the STINGER® 10 A G3 delivers perfect performance with maximum clarity and power under all conditions. The signal processing of the crossover function and the multi-band limiter achieve an optimal runtime and high freedom from distortion. Designed as an all-around workhorse, the housing of the speaker is made of robust birch plywood. An extremely resilient coating of polyurea offers exceptional robustness and durability. The features include a steel front grille, a dual-tilt stand attachment, flight points and ergonomic handles. The STINGER® 10 A G3 is a good value and attractive solution for professional sound systems, with extensive accessories that support usage on the stage and in fixed installations.
- Active 10" 2-way bass-reflex PA speaker
- 127 dB max. SPL and 300-watt RMS performance with a highly-efficient digital amplifier
- Perfect all-rounder for full-range, satellite and monitor applications
- Practical presets for fast and user-specific frequency tuning
- Homogeneous dispersion pattern thanks to a BEM-optimised tweeter wave guide
- 10" custom woofer and BMS tweeter driver
- Distortion-free sound at even maximum volumes, thanks to DynX® DSP technology
- 2 line/mic input channels with individual gain controllers plus mono mix output
- 12 mm birch plywood housing with ultra-robust polyurea coating and M10 rigging points
- Shock-resistant front grille for optimal protection of the speaker.
- 36 mm dual tilt stand attachment with 0° and 5° tilt angle
- Extensive and smart accessories for installation and transport
General
Product type
PA loudspeaker
Low/mid Woofer dimensions
10 "
Woofer dimensions (mm)
254 mm
Woofer voice coil (mm)
50.8 mm
Horn
BEM optimized CD Horn
HF driver voice coil
25.4 mm
Dispersion (H x V)
90 x 50 °
Frequency response
65 - 20000
Protection circuits
Multiband limiter, over voltage, over-current, thermal overload
Controls
2 x gain, 2 x Mic/Line
Indicators
Limit, Mic, Mode, On, Protect (protection circuit engaged), Signal
Line input connectors
6.3 mm jack, XLR
Line output connectors
XLR
Operating voltage
100 - 120 V / 50 - 60 Hz or 200 - 240 V / 50 - 60 Hz (automatic switching), Switching power supply
Operating Temperature
0 - 40 °C
Relative Humidity
< 80% (non-condensing)
Cabinet material
12 mm Plywood
Cabinet construction
Bass Reflex
| Active 2-Way Speaker with Bluetooth Connection
- Equipped with: 12" Woofer and 1" compression driver
- Frequency range [-10dB]: 52 - 18,000 Hz
- Max SPL: 127 dB
- Dispersion pattern: 90° x 60°
- Class D (LF) + Class AB (HF)
- Power Peak (LF + HF) 800 W
- Signal input: 1x Combo (XLR / Jack), Mic / Line, 1x XLR / TRS
- Signal output: 1x XLR Male (LINK / MIX)
- 3 Handles - two at the side, one at the top
- 36 mm Pole mount
- Dimensions (W x H x D): 365 x 622 x 342 mm
- Weight: 16.5 kg
- Colour: Black
- Includes softcover
|
Comprising four versatile loudspeaker enclosures for either portable use or fixed installation, FBT is debuting the VENTIS range at Pro Light + Sound 2016. Available in either passive or bi-amplified versions, each of the models – the VENTIS 115, 112, 110, and 206 – has been designed to meet the highest standards in both performance and aesthetic appeal.
For the VENTIS range, quality and flexibility are the watchwords. Based on a powerful combination of B&C compression drivers and FBT’s own custom, long excursion woofers, the 115, 112 and 110 models are two-way, bass reflex designs housed in 15mm birch plywood. A full-grille design backed by specially treated acoustic cloth delivers the characteristic style for which FBT is known, while fully rotatable constant directivity horns ensure accurate coverage.
The three enclosures are as suitable for fixed installation as they are for use on the stage. M10 points are included as standard while an optional U-bracket can be used for wall-mounting. For use on the road, the VENTIS models include aluminum handles with rubber inserts, a 35mm polemount socket, and a 45° sloped profile for unobtrusive placement on-stage as a monitor.
Meanwhile the multi-purpose VENTIS 206 can be deployed as a front fill, an under-balcony fill, as a main providing pristine speech intelligibility or simply as the full-range companion of a subwoofer. Constructed in 12mm birch plywood, the 206 has an integrated rear handle, an optional mounting bracket and, most importantly, an astonishing size to SPL ratio.
Power for the active VENTIS models comes courtesy of a specially designed, Italian made switching mode amplifier module. Low frequencies are driven by a highly efficient 700W RMS (full bridge) Class-D topology, operating with extremely low THD. For the HF stage, a 200W RMS performance is delivered via a meticulously crafted Class-H / AB design.
Finally, DSP on-board the VENTIS enclosures is both user friendly and powerful. Located on the rear of each enclosure, a menu-driven system is navigated via a single rotary control with push-to-select functionality. A total of 6 pre-optimised settings are available (see below), plus 2 further slots for users to form their own designs, using 5 parametric equalizers per slot. Also available is a high-pass filter, a mic/line selector, low, mid and high tone settings and an optional delay of between 0 and 3.5 metres. Finally, users can exclusively choose between two limiter modes, MAX-SPL or MAX-QUALITY, to best suit their performance.
- 2-way, bi-amplified, bass reflex design
- Biamped: 700W RMS LF and 200W RMS HF power amplifiers in Class D for LF and in Class H/AB for HF
- Digital Signal Processor with graphic display
- 15 mm (0.59”) birch plywood scratch resistant enclosure and internal bracing
- High efficiency switch mode power supply
- Control Panel features balanced XLR/Jack input, XLR LINK OUT, 2 x Volume, RCA Stereo input, DSP display with rotative encoder and push
- 250mm (10”) LF woofer with 50mm (2”) voice coil, custom made for FBT
- 25mm (1”) exit throat B&C HF compression driver with 36mm (1.4”) voice coil
- Frequency response from 58Hz to 20 kHz
- 80°H x 50°V Constant Directivity Rotatable Horn
- 6 x M10 suspension points, optional wall bracket mount thread, 35mm (1 3/8”) top-hat
- Speaker stand socket, one aluminium handle
- 45° monitor taper
Code: |
40640 |
Configuration: |
2 way |
Built-in amplifier LF/HF: |
700/200 W RMS |
Built-in amplifier peak LF/HF: |
1400/400 W |
Frequency response: |
58Hz - 20KHz -6dB |
Low Frequency woofer: |
10 - 2 coil inch |
High Frequency driver: |
1 - 1.4 coil inch |
Maximum SPL cont/peak: |
124/131 dB |
Dispersion: |
80° x 50° rotatable HxV |
Input impedance: |
22 Kohm |
AC Power requirements: |
640 VA |
Input connector: |
XLR with loop, RCA ST |
Power cord: |
5/16.4 m/ft |
Net Dimension (WxHxD): |
329x575x325 / 12.95x22.63x12.79 mm/inch |
Net Weight: |
15.6/34.39 Kg/lb |
Transport Dimension (WxHxD): |
420x675x400 / 16.53x26.57x15.74 mm/inch |
Transport Weight: |
18.1/39.90 Kg/lb |
|
The new ETX Powered Loudspeakers family builds upon the industry-leading innovation and 85-year heritage of Electro-Voice audio engineering to offer the most advanced professional portable powered loudspeakers available today.
A versatile high-end choice for live entertainment venues, rental companies, pro musicians and DJs, and installed sound, the ETX Powered Loudspeakers family features three two-way models (10-inch, 12-inch and 15-inch, all with a precision HF titanium compression driver), a three-way model (15-inch with a 6.5-inch MF driver and a precision HF titanium compression driver) and two subs (15-inch and 18-inch drivers).
Positioned above the ZLX and Live X families respectively, ETX Powered Loudspeakers complete a trio of recent EV portable loudspeaker offerings-each of which was designed to bring best-in-class performance to its price point.
Inside each low-profile, tour-grade wood enclosure are a host of unique new features that set ETX Powered Loudspeakers apart, combining intelligent technology and innovative industrial design for spectacular results across all applications. EV-engineered high-efficiency transducers and high-powered Class-D amplifiers, Signal Synchronized Transducers (SST) waveguide design and smart FIR-Drive DSP all work together to provide peerless EV sound quality and precise coverage at the highest SPLs.
- 10-inch LF SMX woofer
- 1.25-inch HF titanium compression driver
- 2000 W Class-D power amplifier with integrated FIR-Drive DSP
- 134 dB peak SPL
Frequency Range | 65 Hz - 20 kHz Full space measurement using the music DSP preset and 150 Hz low pass. | Maximum SPL | 134 peak dB Maximum SPL is measured at 1 m using broadband pink noise at maximum output. | Power Consumption | 100 - 240 V~, 50 - 60 Hz, 1.6 - 0.8 A Current rating is 1/8 power. | Power Rating | 2000 W | Frequency Response | 85 Hz - 20 kHz Full space measurement using the music DSP preset and 150 Hz low pass. | Coverage (Nominal -6 dB) H | 90 ° | Coverage (Nominal -6 dB) V | 60 ° | LF Transducer | SMX2100 254 mm (10 in) | HF Transducer | DH3-B 1.25-in titanium compression driver | Crossover Frequency | 1700 Hz | Connector Type | (2) XLR/TRS combo jack and (1) XLR link output | Enclosure Material | 18-mm, 13-ply birch plywood with EVCoat | Grill | 16AWG steel with powdercoat | Suspension | (8) M10 suspension points | Height | 526 mm (20.71“) | Width | 330 mm (12.99“) | Depth | 365 mm (14.37“) | Weight Net | 20.3 kg (44.75 lbs) | Shipping Weight | 22.9 kg (50.49 lbs) |
|
Reviews
There are no reviews yet.