KRK TWTK00024 TWEETER FOR KRK series RP

60.49 incl. GR VAT

Only 2 left in stock (can be backordered)

EAN: N/A
Installments calculation
CompareAdd to wishlist Submit Better Price
KRK TWTK00024 / TWK7 TWEETER FOR KRK series RP Replacement KRK tweeter for the KRK RP G2 active speaker. This genuine KRK tweeter is used throughout the Rokit series G1 and G2 active speaker range. It is suitable for use in the following models: RP5 RP5 G2 RP6 RP6 G2 RP8 RP8 G2

 

Read more

KRK TWTK00024 / TWK7 TWEETER FOR KRK series RP

Replacement KRK tweeter for the KRK RP G2 active speaker.

This genuine KRK tweeter is used throughout the Rokit series G1 and G2 active speaker range.
It is suitable for use in the following models:

  • RP5
  • RP5 G2
  • RP6
  • RP6 G2
  • RP8
  • RP8 G2
Weight 1.00 kg

Reviews

There are no reviews yet.

Be the first to review “KRK TWTK00024 TWEETER FOR KRK series RP”

Your email address will not be published. Required fields are marked *

Quick Comparison

KRK TWTK00024 TWEETER FOR KRK series RP removeB & C Speakers DE-200 Driver 1" 40W, 108,5dB 8 Ohm removeB & C Speakers DE-16 Driver 60WRMS, 106dB, 2.5-20k removeB & C Speakers DE-610 Driver 8Ohm 1,4" 160W Program,108dB removeB & C Speakers DE-750TN 8Ohm 220W Driver Titanium diaphragm 107.5 dB sensitivity removeJBL 2450H NEODYMIUM DRIVER 4' 150W 8Ω remove
NameKRK TWTK00024 TWEETER FOR KRK series RP removeB & C Speakers DE-200 Driver 1" 40W, 108,5dB 8 Ohm removeB & C Speakers DE-16 Driver 60WRMS, 106dB, 2.5-20k removeB & C Speakers DE-610 Driver 8Ohm 1,4" 160W Program,108dB removeB & C Speakers DE-750TN 8Ohm 220W Driver Titanium diaphragm 107.5 dB sensitivity removeJBL 2450H NEODYMIUM DRIVER 4' 150W 8Ω remove
ImageKRK TWTK00024 TWEETER FOR KRK series RPde610 de-610 driver bc speakers speaker horn
SKUTWTK00024DE-200DE-16DE-610DE-750TN2450H
Rating
Price60.49 incl. GR VAT 124.00 incl. GR VAT 99.20 incl. GR VAT 201.00 incl. GR VAT 359.00 incl. GR VAT 1,465.00 incl. GR VAT
Stock

Only 2 left in stock (can be backordered)

Only 1 left in stock (can be backordered)

Only 1 left in stock (can be backordered)

Only 1 left in stock (can be backordered)

Only 1 left in stock (can be backordered)

Available on backorder

AvailabilityOnly 2 left in stock (can be backordered)Only 1 left in stock (can be backordered)Only 1 left in stock (can be backordered)Only 1 left in stock (can be backordered)Only 1 left in stock (can be backordered)Available on backorder
Add to cart

Add to cart

Add to cart

Add to cart

Add to cart

Add to cart

Add to cart

Description
ContentKRK TWTK00024 / TWK7 TWEETER FOR KRK series RP Replacement KRK tweeter for the KRK RP G2 active speaker. This genuine KRK tweeter is used throughout the Rokit series G1 and G2 active speaker range. It is suitable for use in the following models:
  • RP5
  • RP5 G2
  • RP6
  • RP6 G2
  • RP8
  • RP8 G2
100 W continuous program power capacity
1” horn throat diameter
44 mm (1.7 in) aluminium voice coil
Titanium diaphragm
1000 – 18000 Hz response
106 dB sensitivity
DE-16 Driver 60WRMS, 106dB, 2.5-20k 1" high frequency compression driver. Low mass mylar diaphragm ensures a very flat frequency response and optimized ceramic magnet assembly allows for high sensitivity and low distortion up to 18 kHz. Specifications1 Throat Diameter 25 mm (1 in) Nominal Impedance 8 Ω Minimum Impedance 7.8 Ω Power Handling (2200 –20000 Hz) Nominal2 30 W Continuous Program3 60 W Sensitivity (1W/1m)4 107 dB Frequency Range 1.5 – 18 kHz Recommended Crossover5 2.2 kHz Voice Coil Diameter 44 mm (1.7 in) Winding Material Aluminium Inductance 0.11 mH Diaphragm Material Mylar Flux Density 1.5 T Mounting and Shipping Information Two M6 holes 180° on 76 mm (3 in) diameter Overall Diameter 102 mm (4 in) Depth 58 mm (2.3 in) Net Weight (1 unit) 1.6 kg (3.5 lb) Shipping Weight (8 units) 13.9 kg (30.6 lb) Shipping Box (8 units) 220x220x150 mm (8.7x8.7x5.9 in) 1 Driver mounted on B&C ME 45 horn. 2 2 hours test made with continuous pink noise signal (6 dB crest factor) within the specified range. Power calculated on rated minimum impedance. 3 Power on Continuous Program is defined as 3 dB greater than the Nominal rating. 4 Applied RMS Voltage is set to 2.83V for 8 ohms and 4V for 16 ohms Nominal Impedance. Average SPL from 1000 to 18000 Hz. 5 12 dB/oct. or higher slope high-pass filter.160 W continuous program power capacity 1.4" horn throat diameter 65 mm (2.5 in) aluminium voice coil Titanium diaphragm 1000 - 18000 Hz response 108 dB sensitivity Shorting copper cap for extended HF response
Product type Compression driver
Brand B&C Speakers
Reference DE610
Product code DRV6108

Informations

Nominal impedance 8 ohm
Dimensional category 6 inch
Manufacturer sensitivity 108 dB
Nominal power handling 30 W
Bandwidth 1000÷18000 Hz
Recommended min cutoff frequency 1200 Hz
Exit dimension 1.4 inch

Fundamental parameters

Le 0.15 mH

Datas

Flux density 1.75 T
Zmin 8.2 ohm
Weight ~3.8 kg

Dimensions

Voice coil diameter 2.5 inch
Outside diameter 156 mm
Depth 65 mm
Driver dimensions mouting holes 6.0 mm
Driver mounting system 4 points on diameter 101.6 mm

Shape & Materials

Front chape Cylindrical
Magnet type Ferrite
Winding material Aluminium
Diaphragm material Titanium
Driver 2“, 110W, 107.5dB, 0.5-18kHz, Titanium, 6.3kg The B&C Speakers DE750TN-8 2" titanium HF driver is a world-class high frequency transducer that is capable of extreme output levels combined with incredible fidelity and musicality. A powerful ceramic ferrite magnet structure provides the high magnetic flux density required for the DE750TN's high efficiency, accuracy, and extended high frequency response. A copper cap on the pole piece reduces inductive losses and extends HF capabilities.   Highlights   - 220 watt continuous program power capacity - 3" (75mm)aluminum voice coil - Titanium diaphragm - Copper shorting cap for extended HF response - 107.5 dB sensitivity - 2" (horn throat diameter) bolt-on format (4-bolt) - 500 – 18000 Hz response
150W AES compression driver, 4 διάφραγμα τιτανίου, coherent wave phasing plug, neodymium rare-earth magnet assembly, 8Ω
Weight1.00 kg2.00 kg1.70 kg5.00 kg5.00 kg10.00 kg
DimensionsN/AN/AN/AN/AN/AN/A
Additional information
Weight 1.00 kg
Weight 2.00 kg
Weight 1.70 kg
Weight 5.00 kg
Weight 5.00 kg
Weight 10.00 kg