| Content |
These Monitor stands feature cabinet quality top plates, cable management, Metal base spikes,
and the ability to add shot or sand internally. They are also great for living rooms to get those
expensive speakers up to ear level and produce the sharpest and clearest sound possible.
Cable management runs from top to bottom. A plastic strip snaps in to back to retain and hide
cables. This unique feature has two channels to prevent interference when using non-balanced cables.
It also keeps the cables out the center channel when you weight the stand with shot or sand. | Features
- Sturdy construction for use with extremely heavy studio monitors
- Adjustable spikes to compensate for uneven floors
Specifications
- Material: steel
- Color: black
- Height: 90 cm
- Maximum load capacity: 60 kg
- Pole diameter: 100 mm * (2.0 mm material thickness)
- Support plate: 500 x 350 mm (6.0 mm material thickness)
- Base plate: 600 x 450 mm (6.0 mm material thickness)
- Weight: 27 kg?
Scope of delivery
Applications
- Speaker stand in recording or project studio
- Speaker stand in band rehearsal room
- Speaker stand for installation and in conference rooms
|
- Height: 30 - 40 - 50 cm (11.8 - 15.5 - 19.7“), 3 steps, with safety pin
- Maximum load: 25 kg (55.1 lb)
- Material: Steel (pole and plate) and nylon (joint)
- Top plate: Square, sturdy
- Top plate dimensions: 23 x 23 cm (9 x 9“)
- Bottom plate dimensions: 24 x 24 cm (9.4 x 9.4“)
- Quantity: 2 stands
- Weight: 2.75 kg (6 lb) per stand
| Universal speaker stand for loudspeakers till 35 kg, black powder coated.
Triangular foot, 35 mm square section tube, utility space 450 x 390 mmTube Ø 40 / 35 mm, adjustable 91,5 cm - 150 cm, T-screw for locking.
Πλευρά τριγώνου 43cm, ύψος τριγώνου 39cm
For heavy speakers you can lock the height on 102 - 114 - 126 - 138 - 150 with the safety pin (included in delivery). Utility space for speakers: 230 x 230 mm, steel material thickness 2 mm, slip resistant surface. Plastic cable clip on upper tube for adequate and discreet cable guiding.
The foot can be equipped with 3 adjustable plastic feet or steel-spikes. Without the plate you can use the speaker stand with a standard speaker stand receptable (Ø35mm).
The product is delivered dismantled, with screws and hexagon socket screw key, 3 plastic feet and 3 steel spikes with lock nut.
Product type
Stands and Tripods
Type
Speaker Stands
Tubing material
Steel
Tubing colour
Black
Tubing surface
Powder coated
Min height:
915 mm
Max height
1500 mm
Joint material
plastic
Tubing diameter
35 / 40 mm
Max. load
35 kg
Weight
4,4 kg
Additional information
Footprint 230 x 230 mm |
42" (106cm) Fixed Height Near-Field Monitor / Speaker Stand
![]() Perfect for home, project or professional recording studios
![]() All-steel, arc welded construction. NO fibre or chipboard
![]() Attractive design incorporating cable management
![]() Solid triangular base with adjustable levelling floor spikes
![]() Vertical columns may be sand loaded to deaden sound and increase stability
![]() Sturdy metal top plate measures 11" square (28 cm)
![]() 120 lb (54 kg) weight capacity
Speaker plate dimensions: 11" square - 28cm square
Fixed Height: 42" - 106.6 cm
Base Size: 17.7" square - 45 cm square
Weight capacity: 125 lb - 57kg
Weight: 14.6 lb - 6.6 kg
| For small speakers and studio monitors
Fine tune your sound the way it’s meant to be heard
The ISO Stands is the latest generation of IsoAcoustics stands designed for studio monitors. The ISO Stands are an updated version of the popular ISO-L8R series and features a lower profile, new frame design and a newer version of isolator for improved performance. The ISO-130 isolation stands are the smallest stands within the ISO Stands family.
Offering 14 variations of height and tilt, the ISO-130 will help you optimize the placement of your monitors and bring your tweeters to ear level. The IsoAcoustics patented isolation system provides superior isolation and decoupling from the supporting surface. The stands are biased to keep all energy in alignment with the listening position, providing greater clarity and focus.
Perfect for optimizing the placement and performance of small studio monitors…
An important aspect of the speaker stand design is the ability to adjust the height and tilt angle of the supported speaker enclosure to optimize its position relative to the listener and eliminate soundwave reflections off the supporting surface. In a typical Desktop Audio Workstation (DAW) configuration, the listener is positioned 3 to 4 feet from the monitors with ear level approximately 20″ above the work surface. Raising and tilting the monitors to the optimum position can be achieved in these circumstances using the IsoAcoustics stands.
Patented IsoAcoustics Isolation
Exciting the supporting surface
The isolators manage the energy of the speaker to reduce vibrations resonating through the supporting surface to eliminate dissonant sounds in the listening area or joining rooms.
Reducing internal reflections
Internal reflections are vibrations reflecting back up the speaker cabinet which causes smear. Smear is a result of artifacts replicated in both channels which are perceived to be in the middle, causing the stereo image to collapse. The IsoAcoustics isolators reduce internal reflections to eliminate smear. The result is an improved stereo image of natural spatial sound.
- 2 Units
- Height adjustable: 80-203 mm
- Adjustable inclination
- Allows you to adjust the speakers for an optimal dispersion pattern in the direction of the listener
- Isolates studio monitors from the supporting surface
- Dimensions per piece: 130 x 150 mm (support surface)
- Maximum load capacity: up to 9 kg
- Quantity included: 1 pair
|
Reviews
There are no reviews yet.