| Content |
Woofer 10" forward firing
Driver Class "D" Amplifier,2400 watts Dynamic ,1200 watts RMS Power
High Pass Crossover 80 Hz (6 dB/octave)
Low Pass Crossover 40 Hz - 120 Hz (12 dB octave initial, 24 dB octave ulimate)
Frequency Response 16-240 Hz
Harmonic Distortion |
Type Advanced YST II and QD-Bass Subwoofer
Driver 25cm(10'') cone
Dynamic Power 250 W
Frequency Response 20-160 Hz
Advanced YST Advanced YST II
QD-Bass Technology Front-firing
High-Efficiency Power Amplifier Yes
Linear Port Yes
BASS (Bass Action Selector System) Yes
Standby Power Consumption 0.3 W
Dimensions (W x H x D) 380 x 368 x 420 mm
Weight 18.5 kg
|
Outer Flange Dimensions | (Metric) :15-1/2” W x 26-3/16” H | 39.4 x 66.5 cm
Cut Out Dimensions | (Metric) :14-3/8” W x 25-1/8” H | 36.5 x 63.8 cm
Depth from Flange | Metric :4” | 10.2 cm
Driver Complement :One 13" Long-Excursion Woofer coupled to a 13" infrasonic Radiator
Frequency Response :14 Hz – 200 Hz
Impedance :4 ohms
Required Amplifier :SubAmp 600 (available separately)
Inputs :One pair of gold plated spring loaded posts
Enclosure :Sealed Medite
Available Finishes :Paintable White
Accessories :Paint mask; Cut-out template; Paintable removable all metal grill
Packaging :One to a carton
Weight | (Metric) :45 lbs | 20.4 kg
Warranty :5 Years
|
Dimensions | Metric :12” W x 12” D x 12-1/2” H | 30.5 x 30.5 x 31.8 cm
Driver Complement :One high-definition 8" long throw woofer, pressure coupled to two 8” low bass radiators
Frequency Response :14 Hz – 200 Hz
Internal Amplifier Power :1250 watts
Auto On / Off :Signal Sensing (US) | Signal Sensing and Switched (International)
Power Requirements :110 volts Alternating Current (US) | 220 volts Alternating Current (International)
High Level Inputs :Two pairs of 5 way binding posts
High Level Outputs :Two pairs of 5 way binding posts
Subwoofer Inputs :One LFE input (for SW preout only)
Low Level Inputs :Two low level inputs: left and right low level in
Low Level Outputs :Two low level outputs: left and right low level out
High Level High Pass Crossover :Non Variable 6 dB/octave @ 80 Hz: Available only with high level inputs and outputs only
Low Level High Pass Crossover :12 dB/octave continuously variable from 40 Hz to 150 Hz. Available only with low level inputs and outputs
Low Pass Crossover% :24 dB/octave, continuously variable from 40 Hz – 150 Hz: Available only with high level inputs and outputs or low level inputs and outputs
Available Finishes :Piano-Gloss Black
Accessories :Rubber feet; Isolation spikes
Fuse :8 amp 250 volt Slo Blo (US) | 4 amp 250 volt Slo Blo (International)
Weight | Metric :42 lbs | 19.0 kg
Warranty :5 Years; 3 Years for Amplifiers | For big sound in smaller spaces, you canʼt beat the ASW608, the most compact of the 600 Series subwoofers.
Its long-throw 200mm driver allows the ASW608 to move the large volumes of air needed for high-quality low-frequency output, and its audiophile-standard 200W Class D amplifier keeps the unit running cool, even when the music or movie action is whipping up a storm.
In all of the 600 Series subwoofers, the bass driver diaphragms are constructed from a rugged, finely-tuned mix of paper pulp, Kevlar® fibres and resin, which provides the stiffness needed to withstand the tremendous physical forces exerted by the voice coil and pressures inside the cabinet.
Ultra-solid construction delivers slamm
| Description |
Active closed-box subwoofer system |
| Drive unit |
ø200mm (8 in) paper/Kevlar® cone long-throw |
| Frequency range |
-6dB at 23Hz and 25/140Hz adjustable (EQ at A) |
| Frequency response |
±3dB 32Hz – 40/140Hz adjustable (EQ at A) |
| Bass Extension |
-6dB at 23Hz (position A) |
|
-6dB at 28Hz (position B) |
|
-6dB at 36Hz (position C) |
| Amplifier |
Power output: 200W |
| Rated power consumption: |
40W/ 0.5W standby |
| Input impedance: |
33kW |
| Signal / noise: |
>90dB |
| Functions: |
Volume level – line in |
|
Volume level – speaker in |
|
Low-pass filter frequency – line in only |
|
Low-pass filter bypass |
|
Bass extension |
|
Bass roll-off alignment |
|
Auto sense on/standby |
|
Phase switch |
| Inputs: |
Line In (RCA Phono) |
|
Speaker in (Binding post) |
|
12v trigger (3.5mm jack) |
|
Low-pass filter |
|
Active 4th-order, variable cut-off frequency |
| Dimensions |
Height: 260mm (10.2 in) not including feet |
|
Width: 260mm (10.2 in) |
|
Depth: 330mm (13 in) including grille and controls |
| Net weight |
8.85kg (19.5 lb) |
| Finishes |
Black Ash Vinyl |
|
Red Cherry Vinyl |
| Product Series Subwoofers
Speaker Type Subwoofer
Frequency Range (+/-3 dB) [Hz] 28 - 190
Maximum SPL [dB] 112
Crossover Frequency [Hz] 40 - 120 Hz
Low Frequency Driver 1 x 12" long stroke Polymere Aluminimum
Enclosure Type Bass Reflex
Bass Reflex Tuning Frequency [Hz] 36.0
Max. Amplifier Power Output [RMS watt] 220
Continous IEC Power Output [RMS watt] 170
Input Impedance [Ω] 25K
Connection input(s) Mono line level (LFE)
Stereo line level (low pass filtered)
RCA
Magnetic Shielding No
Recommended Placement Floor
Near wall or corner
Recommended Distance From Wall [cm] > 5
Functions Crossover Frequency
Phase Switch
Standby (Auto Power) On/Off Switch
Volume (Gain)
Maximum Power Consumption [W] 250
Max. Dimensions Incl. Base And Grille (HxWxD) [mm] 370 x 340 x 380
Weight [kg] 14.7
Accessories Included Manual
Rubber Bumpers
Spikes M6
Finish Black Ash Vinyl
Light Walnut Vinyl
White Vinyl |
Reviews
There are no reviews yet.