Velodyne SPL 1200 ULTRA ACTIVE Subwoofer

2,100.00 incl. GR VAT

In stock

EAN: N/A
Installments calculation
CompareAdd to wishlist Submit Better Price
Availability: Available in 1-3 d. Available in 1-3 d. SKU: SPL 1200 ULTRA Category:
Weight 22.00 kg

Reviews

There are no reviews yet.

Be the first to review “Velodyne SPL 1200 ULTRA ACTIVE Subwoofer”

Your email address will not be published. Required fields are marked *

Quick Comparison

Velodyne SPL 1200 ULTRA ACTIVE Subwoofer removeMonitor Audio PLW15 PLATINUM SERIES SUBWOOFER 1000W removeDEFINITIVE TECHNOLOGY SuperCube II Sub Loudspeaker PIANO GLOSS BLACK removeDEFINITIVE TECHNOLOGY SuperCube Reference Sub Loudspeaker PIANO GLOSS BLACK removeDEFINITIVE TECHNOLOGY SuperCube III Sub Loudspeaker PIANO GLOSS BLACK removeB&W ASW-610 HI-FI ACTIVE SUBWOOFER 200W remove
NameVelodyne SPL 1200 ULTRA ACTIVE Subwoofer removeMonitor Audio PLW15 PLATINUM SERIES SUBWOOFER 1000W removeDEFINITIVE TECHNOLOGY SuperCube II Sub Loudspeaker PIANO GLOSS BLACK removeDEFINITIVE TECHNOLOGY SuperCube Reference Sub Loudspeaker PIANO GLOSS BLACK removeDEFINITIVE TECHNOLOGY SuperCube III Sub Loudspeaker PIANO GLOSS BLACK removeB&W ASW-610 HI-FI ACTIVE SUBWOOFER 200W remove
Image
SKUSPL 1200 ULTRAPLW15SuperCube IISuperCube ReferenceSuperCube IIIASW610
Rating
Price2,100.00 incl. GR VAT3,619.19 incl. GR VAT896.22 incl. GR VAT1,652.31 incl. GR VAT603.87 incl. GR VAT600.00 incl. GR VAT
Stock

In stock

In stock

In stock

In stock

In stock

Available on backorder

AvailabilityIn stockIn stockIn stockIn stockIn stockAvailable on backorder
Add to cart

Add to cart

Add to cart

Add to cart

Add to cart

Add to cart

Add to cart

Description
Content

Amplifier Output: 1000 watts (RMS) 2000 watts (Peak)
Frequency Response: 16Hz to 40/160Hz variable
Crossover (Low Pass): 40Hz - 160Hz Variable slope characteristic from
12 - 36dB/Octave
Sub-Sonic Filter (High Pass): 16Hz - 31Hz
EQ: 4 x Presets 1 x User Setting
Equalisation: Graphic 9 band Equaliser ±6dB in 0.5dB steps
Volume Level: -80 - 0dB (1dB increments from 0 to -30dB & 2dB
increments from -31 to -80dB)
Auto Sensing Input Requirements: Line Level>5mV (RMS) Variable delay time
5, 10, 15, 20, 25 & 30 minutes
Variable Phase Control: 0. 45. 90, 135, 180, 225, 270 & 315º
Internal Memory: 3 Independent memory locations
Cabinet Specification:
Sealed Cabinet with 25mm thick M.D.F
construction with critical internal bracing
Amplifier Classification:
Class-D amplifier with DSP control
Driver Complement:
1 x 15" C-CAM long throw sub-woofer driver featuring triple suspension and a 4" long throw voice coil

External Dimensions -
Excluding Plinth: Width: 485mm (19 inches)
Height: 455mm (18 inches)
Depth: 475mm (18 3/4 inches)
Weight: 50 Kg (110lbs)
Mains input Voltage: 100 - 240 Vac 50/60Hz (Factory Set)
Trigger Input:
3.5mm Jack input, +12Vdc = On State

acrobat_reader_logo. User's Manual

AVAILABLE IN THESE COLOR FINISHES

colors2

Dimensions | Metric :12” W x 12” D x 12-1/2” H | 30.5 x 30.5 x 31.8 cm
Driver Complement :One high-definition 8" long throw woofer, pressure coupled to two 8” low bass radiators
Frequency Response :14 Hz – 200 Hz
Internal Amplifier Power :1250 watts
Auto On / Off :Signal Sensing (US) | Signal Sensing and Switched (International)
Power Requirements :110 volts Alternating Current (US) | 220 volts Alternating Current (International)
High Level Inputs :Two pairs of 5 way binding posts
High Level Outputs :Two pairs of 5 way binding posts
Subwoofer Inputs :One LFE input (for SW preout only)
Low Level Inputs :Two low level inputs: left and right low level in
Low Level Outputs :Two low level outputs: left and right low level out
High Level High Pass Crossover :Non Variable 6 dB/octave @ 80 Hz: Available only with high level inputs and outputs only
Low Level High Pass Crossover :12 dB/octave continuously variable from 40 Hz to 150 Hz. Available only with low level inputs and outputs
Low Pass Crossover% :24 dB/octave, continuously variable from 40 Hz – 150 Hz: Available only with high level inputs and outputs or low level inputs and outputs
Available Finishes :Piano-Gloss Black
Accessories :Rubber feet; Isolation spikes
Fuse :8 amp 250 volt Slo Blo (US) | 4 amp 250 volt Slo Blo (International)
Weight | Metric :42 lbs | 19.0 kg
Warranty :5 Years; 3 Years for Amplifiers

Dimensions | Metric :16-3/4” W x 16-3/4” D x 16-15/16” H | 42.5 x 42.5 x 43.0 cm
Driver Complement :One high-definition 14" long throw woofer, pressure coupled to two 14” low bass radiators
Frequency Response :11 Hz – 200 Hz
Internal Amplifier Power :1800 watts
Auto On / Off :Signal Sensing (US) | Signal Sensing and Switched (International)
Power Requirements :110 volts Alternating Current (US) | 220 volts Alternating Current (International)
High Level Inputs :Two pairs of 5 way binding posts
High Level Outputs :Two pairs of 5 way binding posts
Subwoofer Inputs :One LFE input (for SW preout only)
Low Level Inputs :Two low level inputs: left and right low level in
Low Level Outputs :Two low level outputs: left and right low level out
High Level High Pass Crossover :Non Variable 6 dB/octave @ 80 Hz: Available only with high level inputs and outputs only
Low Level High Pass Crossover :12 dB/octave continuously variable from 40 Hz to 150 Hz: Available only with low level inputs and outputs
Low Pass Crossover% :24 dB/octave continuously variable from 40 Hz – 150 Hz: Available only with high level inputs and outputs or low level inputs and outputs
Available Finishes :Piano-Gloss Black
Accessories :Rubber feet; Isolation spikes
Fuse :8 amp 250 volt Slo Blo (US) | 4 amp 250 volt Slo Blo (International)
Weight | Metric :97 lbs | 44.0 kg
Warranty :5 Years; 3 Years for Amplifiers


Dimensions | Metric :10-1/4” W x 10-1/4” D x 10-1/4” H | 26.0 x 26.0 x 26.0 cm
Driver Complement :One high-definition 7-1/2" long throw woofer, pressure coupled to two 7-1/2” low bass radiators
Frequency Response :16 Hz – 200 Hz
Internal Amplifier Power :650 watts
Auto On / Off :Signal Sensing (US) | Signal Sensing and Switched (International)
Power Requirements :110 volts Alternating Current (US) | 220 volts Alternating Current (International)
High Level Inputs :5 way binding posts
High Level Outputs :5 way binding posts
Subwoofer Inputs :One LFE input (for SW preout only)
Low Level Inputs :Two low level inputs: left and right low level in
Low Level High Pass Crossover :12 dB/octave continuously variable from 40 Hz to 150 Hz: Available only with low level inputs and outputs
Low Pass Crossover% :24 dB/octave continuously variable from 40 Hz – 150 Hz:
Available Finishes :Piano-Gloss Black
Accessories :Rubber feet; Isolation spikes
Fuse :8 amp 250 volt Slo Blo (US) | 4 amp 250 volt Slo Blo (International)
Weight | Metric :25 lbs | 11.3 kg
Warranty :5 Years; 3 Years for Amplifiers

The ASW610 subwoofer presents a very happy medium between the more diminutive ASW608 and the all-out power of the ASW610XP. Its long-throw 250mm driver allows the ASW610 to move the large volumes of air needed for high-quality low-frequency output, and its audiophile-standard 200W Class D amplifier keeps the compact unit running cool, even when the music or movie action is whipping up a storm.

In all of the 600 Series subwoofers, the bass driver diaphragms are constructed from a rugged, finely-tuned mix of paper pulp, Kevlar® fibres and resin, which provides the stiffness needed to withstand the tremendous physical forces exerted by the voice coil and pressures inside the cabinet.

Ultra-solid construction delivers slamming bass, drum kicks, and special movie effects. Deformation is minimised; bass precision, power and enjoyment are maximised.

 

 

DescriptionActive closed-box subwoofer system
Drive unitø250mm (10 in) paper/Kevlar® cone long-throw
Frequency range-6dB at 20Hz and 25/140Hz adjustable (EQ at A)
Frequency response±3dB 27Hz – 40/140Hz adjustable (EQ at A)
Bass Extension-6dB at 20Hz (position A)

-6dB at 25Hz (position B)

-6dB at 30Hz (position C)
Amplifier
Power output:200W
Rated power consumption:40W / 0.5W standby
Input impedance:33kΩ
Signal / noise:>90dB
Functions:Input level (line in)

Input level (speaker in)

Low-pass filter frequency (line in only)

Low-pass filter bypass

Bass extension

Bass roll-off alignment

Auto sense on/standby

Phase switch
Inputs:Line In (RCA Phono)

Speaker in (Binding post)

12v trigger (3.5mm jack)

Low-pass filter

Active 4th-order, variable cut-off frequency
DimensionsHeight: 310mm (12.2 in) not including feet

Width: 310mm (12.2 in)

Depth: 375mm (14.8 in) including grille and controls
Net weight12.5kg (27.6 lb)
FinishesBlack Ash Vinyl

Red Cherry Vinyl
Weight22.00 kg50.00 kg19.00 kg44.00 kg11.30 kg12.50 kg
DimensionsN/AN/AN/AN/AN/AN/A
Additional information
Weight 22.00 kg
Weight 50.00 kg
Weight 19.00 kg
Weight 44.00 kg
Weight 11.30 kg
Weight 12.50 kg