| Content |
With the Impact-Mini you get amazing bass in a tiny cabinet that is almost the same size as the MiniVee-8, but at a very budget-friendly price. This engineering marvel is lightweight with an aluminum cone, furniture-quality cabinet finish and concentrates its 300 watts of output power in the 38 Hz to 140 Hz range. This is Velodyne's lightest weight subwoofer and includes an adjustable low pass crossover frequency so you can easily match the Impact-Mini to your satellite speakers.
Features
Compact, stylish cabinet; high-value subwoofer
6.5" active and 8" passive andonized aluminum woofers
High quality, long throw drivers
2" copper-wound voice coil for exceptional reliability
Down-firing bass radiator for more output, less distortion
"Green” MDP amp rated at 300 watts Dynamic power
User's Manual Specifications
| For big sound in smaller spaces, you canʼt beat the ASW608, the most compact of the 600 Series subwoofers.
Its long-throw 200mm driver allows the ASW608 to move the large volumes of air needed for high-quality low-frequency output, and its audiophile-standard 200W Class D amplifier keeps the unit running cool, even when the music or movie action is whipping up a storm.
In all of the 600 Series subwoofers, the bass driver diaphragms are constructed from a rugged, finely-tuned mix of paper pulp, Kevlar® fibres and resin, which provides the stiffness needed to withstand the tremendous physical forces exerted by the voice coil and pressures inside the cabinet.
Ultra-solid construction delivers slamm
| Description |
Active closed-box subwoofer system |
| Drive unit |
ø200mm (8 in) paper/Kevlar® cone long-throw |
| Frequency range |
-6dB at 23Hz and 25/140Hz adjustable (EQ at A) |
| Frequency response |
±3dB 32Hz – 40/140Hz adjustable (EQ at A) |
| Bass Extension |
-6dB at 23Hz (position A) |
|
-6dB at 28Hz (position B) |
|
-6dB at 36Hz (position C) |
| Amplifier |
Power output: 200W |
| Rated power consumption: |
40W/ 0.5W standby |
| Input impedance: |
33kW |
| Signal / noise: |
>90dB |
| Functions: |
Volume level – line in |
|
Volume level – speaker in |
|
Low-pass filter frequency – line in only |
|
Low-pass filter bypass |
|
Bass extension |
|
Bass roll-off alignment |
|
Auto sense on/standby |
|
Phase switch |
| Inputs: |
Line In (RCA Phono) |
|
Speaker in (Binding post) |
|
12v trigger (3.5mm jack) |
|
Low-pass filter |
|
Active 4th-order, variable cut-off frequency |
| Dimensions |
Height: 260mm (10.2 in) not including feet |
|
Width: 260mm (10.2 in) |
|
Depth: 330mm (13 in) including grille and controls |
| Net weight |
8.85kg (19.5 lb) |
| Finishes |
Black Ash Vinyl |
|
Red Cherry Vinyl |
|
Technical features 500W class 'D' power amplifier
Description Active closed-box subwoofer system
Drive unit 1x f250mm (10 in) paper / Kevlar® cone long-throw
Frequency range -6dB at 18Hz and 40/140Hz adjustable (EQ at A)
Frequency response ±3dB 25Hz – 40/140Hz adjustable (EQ at A)
Power output: 500W
Rated power consumption: 94W
Input impedance: 33kΩ
Signal / noise: >80dB
Functions: Input Level (line in)
Input Level (speaker in)
Low-pass filter frequency
Low-pass filter bypass (line in only)
Bass extension
Bass roll-off alignment
Auto sense on/standby
Phase switch
Inputs: Line In (RCA Phono)
Speaker Level In (Binding post)
Low-pass filter Active 4th-order, variable cut-off frequency
Height: 325mm 12.8 in)
Width: 325mm (12.8 in)
Depth: 362mm (14.3 in)
Net weight 15.5kg (34.4 lb)
Cabinet Gloss Black
AVAILABLE IN gloss black,wenge,rozenut COLORS
|
Dimensions | Metric :16-3/4” W x 16-3/4” D x 16-15/16” H | 42.5 x 42.5 x 43.0 cm
Driver Complement :One high-definition 14" long throw woofer, pressure coupled to two 14” low bass radiators
Frequency Response :11 Hz – 200 Hz
Internal Amplifier Power :1800 watts
Auto On / Off :Signal Sensing (US) | Signal Sensing and Switched (International)
Power Requirements :110 volts Alternating Current (US) | 220 volts Alternating Current (International)
High Level Inputs :Two pairs of 5 way binding posts
High Level Outputs :Two pairs of 5 way binding posts
Subwoofer Inputs :One LFE input (for SW preout only)
Low Level Inputs :Two low level inputs: left and right low level in
Low Level Outputs :Two low level outputs: left and right low level out
High Level High Pass Crossover :Non Variable 6 dB/octave @ 80 Hz: Available only with high level inputs and outputs only
Low Level High Pass Crossover :12 dB/octave continuously variable from 40 Hz to 150 Hz: Available only with low level inputs and outputs
Low Pass Crossover% :24 dB/octave continuously variable from 40 Hz – 150 Hz: Available only with high level inputs and outputs or low level inputs and outputs
Available Finishes :Piano-Gloss Black
Accessories :Rubber feet; Isolation spikes
Fuse :8 amp 250 volt Slo Blo (US) | 4 amp 250 volt Slo Blo (International)
Weight | Metric :97 lbs | 44.0 kg
Warranty :5 Years; 3 Years for Amplifiers
| Product Series Subwoofers
Speaker Type Subwoofer
Frequency Range (+/-3 dB) [Hz] 28 - 190
Maximum SPL [dB] 112
Crossover Frequency [Hz] 40 - 120 Hz
Low Frequency Driver 1 x 12" long stroke Polymere Aluminimum
Enclosure Type Bass Reflex
Bass Reflex Tuning Frequency [Hz] 36.0
Max. Amplifier Power Output [RMS watt] 220
Continous IEC Power Output [RMS watt] 170
Input Impedance [Ω] 25K
Connection input(s) Mono line level (LFE)
Stereo line level (low pass filtered)
RCA
Magnetic Shielding No
Recommended Placement Floor
Near wall or corner
Recommended Distance From Wall [cm] > 5
Functions Crossover Frequency
Phase Switch
Standby (Auto Power) On/Off Switch
Volume (Gain)
Maximum Power Consumption [W] 250
Max. Dimensions Incl. Base And Grille (HxWxD) [mm] 370 x 340 x 380
Weight [kg] 14.7
Accessories Included Manual
Rubber Bumpers
Spikes M6
Finish Black Ash Vinyl
Light Walnut Vinyl
White Vinyl |
Amplifier Output: 1000 watts (RMS) 2000 watts (Peak)
Frequency Response: 16Hz to 40/160Hz variable
Crossover (Low Pass): 40Hz - 160Hz Variable slope characteristic from
12 - 36dB/Octave
Sub-Sonic Filter (High Pass): 16Hz - 31Hz
EQ: 4 x Presets 1 x User Setting
Equalisation: Graphic 9 band Equaliser ±6dB in 0.5dB steps
Volume Level: -80 - 0dB (1dB increments from 0 to -30dB & 2dB
increments from -31 to -80dB)
Auto Sensing Input Requirements: Line Level>5mV (RMS) Variable delay time
5, 10, 15, 20, 25 & 30 minutes
Variable Phase Control: 0. 45. 90, 135, 180, 225, 270 & 315º
Internal Memory: 3 Independent memory locations
Cabinet Specification:
Sealed Cabinet with 25mm thick M.D.F
construction with critical internal bracing
Amplifier Classification:
Class-D amplifier with DSP control
Driver Complement:
1 x 15" C-CAM long throw sub-woofer driver featuring triple suspension and a 4" long throw voice coil
External Dimensions -
Excluding Plinth: Width: 485mm (19 inches)
Height: 455mm (18 inches)
Depth: 475mm (18 3/4 inches)
Weight: 50 Kg (110lbs)
Mains input Voltage: 100 - 240 Vac 50/60Hz (Factory Set)
Trigger Input:
3.5mm Jack input, +12Vdc = On State
![acrobat_reader_logo.]( "acrobat_reader_logo.") User's Manual AVAILABLE IN THESE COLOR FINISHES ![colors2]( "colors2")
|
Reviews
There are no reviews yet.