Velodyne Impact Mini 6.5 Inch Subwoofer -WHITE-

With the Impact-Mini you get amazing bass in a tiny cabinet that is almost the same size as the MiniVee-8, but at a very budget-friendly price. This engineering marvel is lightweight with an aluminum cone, furniture-quality cabinet finish and concentrates its 300 watts of output power in the 38 Hz to 140 Hz range. This is Velodyne's lightest weight subwoofer and includes an adjustable low pass crossover frequency so you can easily match the Impact-Mini to your satellite speakers.


Features



Compact, stylish cabinet; high-value subwoofer

6.5" active and 8" passive andonized aluminum woofers

High quality, long throw drivers

2" copper-wound voice coil for exceptional reliability

Down-firing bass radiator for more output, less distortion

"Green” MDP amp rated at 300 watts Dynamic power

Amplifier Output: 1000 watts (RMS) 2000 watts (Peak)
Frequency Response: 16Hz to 40/160Hz variable
Crossover (Low Pass): 40Hz - 160Hz Variable slope characteristic from
12 - 36dB/Octave
Sub-Sonic Filter (High Pass): 16Hz - 31Hz
EQ: 4 x Presets 1 x User Setting
Equalisation: Graphic 9 band Equaliser ±6dB in 0.5dB steps
Volume Level: -80 - 0dB (1dB increments from 0 to -30dB & 2dB
increments from -31 to -80dB)
Auto Sensing Input Requirements: Line Level>5mV (RMS) Variable delay time
5, 10, 15, 20, 25 & 30 minutes
Variable Phase Control: 0. 45. 90, 135, 180, 225, 270 & 315º
Internal Memory: 3 Independent memory locations
Cabinet Specification:
Sealed Cabinet with 25mm thick M.D.F
construction with critical internal bracing
Amplifier Classification:
Class-D amplifier with DSP control
Driver Complement:
1 x 15" C-CAM long throw sub-woofer driver featuring triple suspension and a 4" long throw voice coil

External Dimensions -
Excluding Plinth: Width: 485mm (19 inches)
Height: 455mm (18 inches)
Depth: 475mm (18 3/4 inches)
Weight: 50 Kg (110lbs)
Mains input Voltage: 100 - 240 Vac 50/60Hz (Factory Set)
Trigger Input:
3.5mm Jack input, +12Vdc = On State

User's Manual

AVAILABLE IN THESE COLOR FINISHES

Dimensions | Metric :16-3/4” W x 16-3/4” D x 16-15/16” H | 42.5 x 42.5 x 43.0 cm
Driver Complement :One high-definition 14" long throw woofer, pressure coupled to two 14” low bass radiators
Frequency Response :11 Hz – 200 Hz
Internal Amplifier Power :1800 watts
Auto On / Off :Signal Sensing (US) | Signal Sensing and Switched (International)
Power Requirements :110 volts Alternating Current (US) | 220 volts Alternating Current (International)
High Level Inputs :Two pairs of 5 way binding posts
High Level Outputs :Two pairs of 5 way binding posts
Subwoofer Inputs :One LFE input (for SW preout only)
Low Level Inputs :Two low level inputs: left and right low level in
Low Level Outputs :Two low level outputs: left and right low level out
High Level High Pass Crossover :Non Variable 6 dB/octave @ 80 Hz: Available only with high level inputs and outputs only
Low Level High Pass Crossover :12 dB/octave continuously variable from 40 Hz to 150 Hz: Available only with low level inputs and outputs
Low Pass Crossover% :24 dB/octave continuously variable from 40 Hz – 150 Hz: Available only with high level inputs and outputs or low level inputs and outputs
Available Finishes :Piano-Gloss Black
Accessories :Rubber feet; Isolation spikes
Fuse :8 amp 250 volt Slo Blo (US) | 4 amp 250 volt Slo Blo (International)
Weight | Metric :97 lbs | 44.0 kg
Warranty :5 Years; 3 Years for Amplifiers

Low Frequency Limit:    27Hz (EQ1) 21Hz (EQ2)
Upper Frequency Limit:    40 - 120Hz Variable
Power Output:    500W RMS (1000W Peak)
Low Pass Filter Alignment:    Active 4th order 24dB/Octave (2nd stage filter)
Cabinet Specification:    25mm construction and internal bracing
Cabinet Alignment:    sealed cabinet
Driver Complement:    1 x 12" C-CAM® sub woofer driver featured triple suspension and ling throw 3" voice coil
External Dimensions:
(H x W x D)
inc. amp & driver    340 x 340 x 410 mm
(13 3/8 x 13 3/8 x 16 1/8 inch)
External Dimensions:
(H x W x D)
inc. feet & grille    375mm (15“) high with feet
430mm (16 15/16“) deep
inc amp & grille
Mains Input Voltage Specification:    110 - 120 Vac / 220 - 240 Vac 50/60Hz
Individual Weight:    22.56 Kg (49.63 lb)

 User's Manual

 ΔΙΑΤΙΘΕΤΑΙ ΣΤΑ ΠΑΡΑΚΑΤΩ ΧΡΩΜΑΤΑ

System Format: Sealed Cabinet. 25mm M.D.F construction with internal bracing. Sealed amplifier compartment
Low Frequency Limit: 18 Hz
Upper Frequency Limit: 40 - 120 Hz Variable
Low Pass Filter Alignment: Active 4th order 24dB/octave (6/12/18/24 dB user adjustable)
Amplifier Power Output 650 watts Continuous. 1200 watts (peak)
Amplifier Classification D2AudioTM* DSP controlled, Class-D amplifier system. High current switch mode power supply (smpsu)
Equalisation 4 Settings (Off/Music/Movie/Impact)
Phase Control 0-90-180-270 degrees
Auto Sensing Input Level Requirements Line Level > 2mV. Standby after 10 minutes if no signal sensed
Digital Volume Level -60 to +10dB in 1dB increments
Drive Unit Complement 1 x 15” C-CAM® sub-woofer driver featuring triple suspension
3” long throw voice coil
12V Trigger Input 3.5mm mono jack socket
Connections Stereo RCA in/out
LFE in/out
12V Trigger in (3.5mm mono jack)
LEO* - 3.5mm Microphone input jack (microphone supplied)
Input Impedance 20 kohms
Dimensions (H x W x D) 430 x 400 x 400 mm (16 15/16 x 15 3/4 x 15 3/4 Inches)
Grille Depth 28 mm (1 1/8 Inches)
Weight (unpacked) 35.3 kg (77.6 lbs)
Mains Input Voltage 100 - 120 Vac / 220 - 240 Vac 50/60 Hz (Factory preset)
Electrical Certifications CE/CB/ETL/Fcc/ErP (Energy saving compliant)
Power Consumption Maximum 1000W. Standby Fuse Type 20mm UL/VDE (Value is region specific)
IR Remote Control Code NEC SH6122

AVAILABLE IN SIX COLOR FINISHES