Velodyne Impact 12 MKII Sub Loudspeaker

Impact Series: High Performance, High Value Subwoofers

The down-firing port on the Impact-12 gives more bass output with less distortion than similarly priced subwoofer from other companies. With its 275 watts of amplifier focused on the 29 Hz to 140 Hz frequencies, you get a ton of bass for you dollar. You can blend the Impact-12 with your satellite speakers using the adjustable low pass crossover frequency feature. All this great sound is wrapped up in an attractive black ash wood grain colored cabinet with black gloss trim.

Features

• Compact, stylish cabinet; high-value subwoofer
• High quality, long throw drivers
• 12" forward firing coated fiber woofer
• Down-firing port minimizes distortion
• 2" copper-wound voice coils for exceptional reliability
• “Green” MDP amp rated at 275 watts Dynamic power

Outer Flange Dimensions | (Metric) :15-1/2” W x 26-3/16” H | 39.4 x 66.5 cm
Cut Out Dimensions | (Metric) :14-3/8” W x 25-1/8” H | 36.5 x 63.8 cm
Depth from Flange | Metric :4” | 10.2 cm
Driver Complement :One 13" Long-Excursion Woofer coupled to a 13" infrasonic Radiator
Frequency Response :14 Hz – 200 Hz
Impedance :4 ohms
Required Amplifier :SubAmp 600 (available separately)
Inputs :One pair of gold plated spring loaded posts
Enclosure :Sealed Medite
Available Finishes :Paintable White
Accessories :Paint mask; Cut-out template; Paintable removable all metal grill
Packaging :One to a carton
Weight | (Metric) :45 lbs | 20.4 kg
Warranty :5 Years

System Format: Sealed Cabinet. 25mm M.D.F construction with internal bracing. Sealed amplifier compartment
Low Frequency Limit: 18 Hz
Upper Frequency Limit: 40 - 120 Hz Variable
Low Pass Filter Alignment: Active 4th order 24dB/octave (6/12/18/24 dB user adjustable)
Amplifier Power Output 650 watts Continuous. 1200 watts (peak)
Amplifier Classification D2AudioTM* DSP controlled, Class-D amplifier system. High current switch mode power supply (smpsu)
Equalisation 4 Settings (Off/Music/Movie/Impact)
Phase Control 0-90-180-270 degrees
Auto Sensing Input Level Requirements Line Level > 2mV. Standby after 10 minutes if no signal sensed
Digital Volume Level -60 to +10dB in 1dB increments
Drive Unit Complement 1 x 15” C-CAM® sub-woofer driver featuring triple suspension
3” long throw voice coil
12V Trigger Input 3.5mm mono jack socket
Connections Stereo RCA in/out
LFE in/out
12V Trigger in (3.5mm mono jack)
LEO* - 3.5mm Microphone input jack (microphone supplied)
Input Impedance 20 kohms
Dimensions (H x W x D) 430 x 400 x 400 mm (16 15/16 x 15 3/4 x 15 3/4 Inches)
Grille Depth 28 mm (1 1/8 Inches)
Weight (unpacked) 35.3 kg (77.6 lbs)
Mains Input Voltage 100 - 120 Vac / 220 - 240 Vac 50/60 Hz (Factory preset)
Electrical Certifications CE/CB/ETL/Fcc/ErP (Energy saving compliant)
Power Consumption Maximum 1000W. Standby Fuse Type 20mm UL/VDE (Value is region specific)
IR Remote Control Code NEC SH6122

AVAILABLE IN SIX COLOR FINISHES

Dimensions | Metric :16-3/4” W x 16-3/4” D x 16-15/16” H | 42.5 x 42.5 x 43.0 cm
Driver Complement :One high-definition 14" long throw woofer, pressure coupled to two 14” low bass radiators
Frequency Response :11 Hz – 200 Hz
Internal Amplifier Power :1800 watts
Auto On / Off :Signal Sensing (US) | Signal Sensing and Switched (International)
Power Requirements :110 volts Alternating Current (US) | 220 volts Alternating Current (International)
High Level Inputs :Two pairs of 5 way binding posts
High Level Outputs :Two pairs of 5 way binding posts
Subwoofer Inputs :One LFE input (for SW preout only)
Low Level Inputs :Two low level inputs: left and right low level in
Low Level Outputs :Two low level outputs: left and right low level out
High Level High Pass Crossover :Non Variable 6 dB/octave @ 80 Hz: Available only with high level inputs and outputs only
Low Level High Pass Crossover :12 dB/octave continuously variable from 40 Hz to 150 Hz: Available only with low level inputs and outputs
Low Pass Crossover% :24 dB/octave continuously variable from 40 Hz – 150 Hz: Available only with high level inputs and outputs or low level inputs and outputs
Available Finishes :Piano-Gloss Black
Accessories :Rubber feet; Isolation spikes
Fuse :8 amp 250 volt Slo Blo (US) | 4 amp 250 volt Slo Blo (International)
Weight | Metric :97 lbs | 44.0 kg
Warranty :5 Years; 3 Years for Amplifiers

 Super-compact size
8" custom downfiring woofer
Wireless-ready!
Solid hand-finished, front-ported cabinet
Auto-sleep power saving mode
Dual line-level inputs (RCA and mini-jack)
All cables included
Excellent performance for music, movies,
and videogames
A perfect bass extension for Audioengine
powered speakers or any audio system!

Brand Name:    Audioengine
Speaker Type:    Subwoofer
Item Display Height:    11.3 in
Depth:    11.3 in
RMS Power Range - Speakers:    125 watts
Peak Power Handling - Speakers:    250 watts
Maximum Speaker Depth (inches):    11.3 in

System Format:    Sealed Cabinet. 25mm M.D.F construction with internal bracing. Sealed amplifier compartment
Low Frequency Limit:    18 Hz
Upper Frequency Limit:    40 - 120 Hz Variable
Low Pass Filter Alignment:    Active 4th order 24dB/octave (6/12/18/24 dB user adjustable)
Amplifier Power Output    650 watts Continuous. 1200 watts (peak)
Amplifier Classification    D2AudioTM* DSP controlled, Class-D amplifier system. High current switch mode power supply (smpsu)
Equalisation    4 Settings (Off/Music/Movie/Impact)
Phase Control    0-90-180-270 degrees
Auto Sensing Input Level Requirements    Line Level > 2mV. Standby after 10 minutes if no signal sensed
Digital Volume Level    -60 to +10dB in 1dB increments
Drive Unit Complement    1 x 15” C-CAM® sub-woofer driver featuring triple suspension
3” long throw voice coil
12V Trigger Input    3.5mm mono jack socket
Connections    Stereo RCA in/out
LFE in/out
12V Trigger in (3.5mm mono jack)
LEO* - 3.5mm Microphone input jack (microphone supplied)
Input Impedance    20 kohms
Dimensions (H x W x D)    430 x 400 x 400 mm (16 15/16 x 15 3/4 x 15 3/4 Inches)
Grille Depth    28 mm (1 1/8 Inches)
Weight (unpacked)    35.3 kg (77.6 lbs)
Mains Input Voltage    100 - 120 Vac / 220 - 240 Vac 50/60 Hz (Factory preset)
Electrical Certifications    CE/CB/ETL/Fcc/ErP (Energy saving compliant)
Power Consumption    Maximum 1000W. Standby Fuse Type    20mm UL/VDE (Value is region specific)
IR Remote Control Code    NEC SH6122