Velodyne SC IWBB In-wall Back Box for SC-IW Sub

Length    No
Accessories    N/A
Amplifier    N/A
Auto On/Off    No
Cabinet Design    N/A
Color    Black
Dimensions: (H/W/D)    For installation, use mudring as a guide (leave an opening that is approximately 16 1/2” x 13 1/4”)
HiPass Crossover    N/A
LoPass Crossover    N/A
Phase Control    No
Removable Grille    No
Shipping Weight    No
Size    Large
Voice Coil    N/A
Warranty (N. Am.)    N/A

Flange Dimensions | Metric :8-1/8” W x 29-3/4” H | 20.6 x 75.6 cm
Cut Out Dimensions | Metric :7” W x 28-1/2” H | 17.8 x 72.4 cm
Depth from Flange | Metric :3-13/16” | 9.7 cm
Driver Complement :One 1" pure aluminum dome tweeters; Two 6-1/2" cast-basket bass/midrange drivers pressure coupled to two 6-1/2” bass radiators
Frequency Response :22 Hz – 30 kHz
Impedance :Compatible with 8 Ohm outputs
Sensitivity :92 dB
Recommended Associated Amplifier Power :10 – 350 watts
A/V Receiver Crossover Setting :40 Hz
Inputs :One pair of gold plated spring loaded posts
Enclosure :Sealed Medite
Available Finishes :Paintable White
Accessories :Paint mask; Cut-out template
Weight | Metric :17 lbs | 7.7 kg
Packaging :One to a carton
Warranty :5 Years

Dimensions | Metric :5-7/16" W x 4-1/4" D x 25-1/4" H | 13.8 x 10.8 x 64.1 cm
Height with Base | Metric :26-5/8” | 65.1 cm
Base Dimensions | Metric :8” W x 6” D | 20.3 x 16.5 cm
Driver Complement :One 1" pure aluminum dome tweeter; Two 4-1/2" high definition upper bass/midrange drivers; Two 4-1/2" pressure coupled bass radiators
Frequency Response :45 Hz – 30 kHz
Impedance :Compatible with 8 Ohms outputs
Sensitivity :91 dB
Recommended Associated Amplifier Power :10 – 200 watts
A/V Receiver Crossover Setting :100 Hz
Inputs :One pair of 5 way binding posts
Enclosure :Aircraft grade extruded aluminum
Available Finishes :Gloss Black
Base :Tempered Glass
Mounting Options :Vertically Only: On Shelf with included glass base; On wall with included flush mounting bracket
Accessories :Wall bracket; Glass Base
Packaging :One to a carton
Weight | Metric :15 lbs | 6.8 kg
Warranty :5 Years

Driver Complement
Mid/Woofer     1 - 6-1/2" Diameter (16.51cm)
Dynamic Balance, mineral filled Polymer cone with rubber surround
Tweeter     1 - 3/4" Diameter (1.91cm)
Dynamic Balance, metalized soft dome in swivel mount
Electrical
Overall Frequency Response     32Hz - 20kHz
Lower -3dB Limit     60Hz
Upper -3dB Limit     20kHz
Nominal Impedance     8 ohms
Recommended Amplifier Power     20-100 w/channel
Efficiency     89 dB
Dimensions
Size     12-1/16" H x 8-5/8" W
(30.64cm H x 21.91cm W)
Cut-out Size     10-7/8" H x 7-3/8" W
(27.62cm H x 18.73cm W)
Mounting Depth
(assumes 1/2" [12.7mm] wall material)     2-3/8" (6.03cm)
Overall Depth     2-7/8" (7.30cm)
Shipping/Other      
Shipped As     pair
Total Shipping Weight     8.00 lbs. (3.63kgs)
Speaker Warranty     Lifetime Warranty

ter Flange Dimensions | Metric :7” W x 25” H | 17.8 x 63.5 cm
Cut Out Dimensions | Metric :5-7/8” W x 23-3/4” H | 14.9 x 60.3 cm
Depth from Flange | Metric :3-13/16” | 9.7 cm
Driver Complement :One 1" pure aluminum dome tweeters; Two 5-1/4" cast-basket bass/midrange drivers pressure coupled to two 5-1/4” bass radiators
Frequency Response :24 Hz – 30 kHz
Impedance :Compatible with 8 Ohm outputs
Sensitivity :92 dB
Recommended Associated Amplifier Power :10 – 325 watts
A/V Receiver Crossover Setting :60 Hz
Inputs :One pair of gold plated spring loaded posts
Enclosure :Sealed Medite
Available Finishes :Paintable White
Accessories :Paint mask; Cut-out template
Packaging :One to a carton
Warranty :5 Years
Weight | (Metric) :15 lbs | 6.8 kg