| Content |
Length No
Accessories Remote Control, Digital Drive Plus Accessory Kit, Video Cable
Amplifier 3000 watts Dynamic, 1250 watts RMS Power
Auto On/Off Yes
Cabinet Design Sealed servo enclosure
Dimensions: (H/W/D) 22.7" x20.7" 25.6" (58cm x 53cm x 65cm)
HiPass Crossover 80 or 100 Hz at 6 dB/octave
LoPass Crossover 40 Hz to 199 Hz (variable in 1 Hz increments) selectable slope Default: 80 Hz @ 24 dB/Octave
Phase Control 0, 180 Degrees
Removable Grille Yes
Shipping Weight 140 lbs. (64 kg)
Size No
Voice Coil Six-layer, 75mm
Warranty (N. Am.) Two years (electronics & drivers - parts & labor)
|
Dimensions | Metric :10-5/16” W x 15-3/4” D x 12-7/8” H | 26.2 x 40.0 x 32.7 cm
Driver Complement :One high-definition 8" woofer pressure coupled to one 8" low bass radiator.
Frequency Response :20 Hz – 150 Hz
Internal Amplifier Power :300 watts
Auto On / Off :Signal Sensing (US) | Signal Sensing and Switched (International)
Power Requirements :110 volts Alternating Current (US) | 220 volts Alternating Current (International)
High Level Inputs :Two pairs of 5 way binding posts
High Level Outputs :Two pairs of 5 way binding posts
Low Level Inputs :One LFE input (for SW preout only)
High Pass Crossover :Non Variable 6 dB/octave @ 80 Hz: Available only with high level inputs and outputs
Low Pass Crossover% :24 dB/octave, continuously variable from 40 Hz – 150 Hz: Available with high level inputs only
Available Finishes :Matte Black; Matte White
Fuse :3.2 amp 250 volt Slo Blo (US) | 2 amp 250 volt Slo Blo (International)
Packaging :Packaged individually or as part of ProCinema 800 system
Weight | Metric :26 lbs | 11.8 kg
Warranty :5 Years; 3 Years for Amplifiers
| For big sound in smaller spaces, you canʼt beat the ASW608, the most compact of the 600 Series subwoofers.
Its long-throw 200mm driver allows the ASW608 to move the large volumes of air needed for high-quality low-frequency output, and its audiophile-standard 200W Class D amplifier keeps the unit running cool, even when the music or movie action is whipping up a storm.
In all of the 600 Series subwoofers, the bass driver diaphragms are constructed from a rugged, finely-tuned mix of paper pulp, Kevlar® fibres and resin, which provides the stiffness needed to withstand the tremendous physical forces exerted by the voice coil and pressures inside the cabinet.
Ultra-solid construction delivers slamm
| Description |
Active closed-box subwoofer system |
| Drive unit |
ø200mm (8 in) paper/Kevlar® cone long-throw |
| Frequency range |
-6dB at 23Hz and 25/140Hz adjustable (EQ at A) |
| Frequency response |
±3dB 32Hz – 40/140Hz adjustable (EQ at A) |
| Bass Extension |
-6dB at 23Hz (position A) |
|
-6dB at 28Hz (position B) |
|
-6dB at 36Hz (position C) |
| Amplifier |
Power output: 200W |
| Rated power consumption: |
40W/ 0.5W standby |
| Input impedance: |
33kW |
| Signal / noise: |
>90dB |
| Functions: |
Volume level – line in |
|
Volume level – speaker in |
|
Low-pass filter frequency – line in only |
|
Low-pass filter bypass |
|
Bass extension |
|
Bass roll-off alignment |
|
Auto sense on/standby |
|
Phase switch |
| Inputs: |
Line In (RCA Phono) |
|
Speaker in (Binding post) |
|
12v trigger (3.5mm jack) |
|
Low-pass filter |
|
Active 4th-order, variable cut-off frequency |
| Dimensions |
Height: 260mm (10.2 in) not including feet |
|
Width: 260mm (10.2 in) |
|
Depth: 330mm (13 in) including grille and controls |
| Net weight |
8.85kg (19.5 lb) |
| Finishes |
Black Ash Vinyl |
|
Red Cherry Vinyl |
|
Dimensions | Metric :16-3/4” W x 16-3/4” D x 16-15/16” H | 42.5 x 42.5 x 43.0 cm
Driver Complement :One high-definition 14" long throw woofer, pressure coupled to two 14” low bass radiators
Frequency Response :11 Hz – 200 Hz
Internal Amplifier Power :1800 watts
Auto On / Off :Signal Sensing (US) | Signal Sensing and Switched (International)
Power Requirements :110 volts Alternating Current (US) | 220 volts Alternating Current (International)
High Level Inputs :Two pairs of 5 way binding posts
High Level Outputs :Two pairs of 5 way binding posts
Subwoofer Inputs :One LFE input (for SW preout only)
Low Level Inputs :Two low level inputs: left and right low level in
Low Level Outputs :Two low level outputs: left and right low level out
High Level High Pass Crossover :Non Variable 6 dB/octave @ 80 Hz: Available only with high level inputs and outputs only
Low Level High Pass Crossover :12 dB/octave continuously variable from 40 Hz to 150 Hz: Available only with low level inputs and outputs
Low Pass Crossover% :24 dB/octave continuously variable from 40 Hz – 150 Hz: Available only with high level inputs and outputs or low level inputs and outputs
Available Finishes :Piano-Gloss Black
Accessories :Rubber feet; Isolation spikes
Fuse :8 amp 250 volt Slo Blo (US) | 4 amp 250 volt Slo Blo (International)
Weight | Metric :97 lbs | 44.0 kg
Warranty :5 Years; 3 Years for Amplifiers
|
System Format: Sealed Cabinet. 25mm M.D.F construction with internal bracing. Sealed amplifier compartment
Low Frequency Limit: 18 Hz
Upper Frequency Limit: 40 - 120 Hz Variable
Low Pass Filter Alignment: Active 4th order 24dB/octave (6/12/18/24 dB user adjustable)
Amplifier Power Output 650 watts Continuous. 1200 watts (peak)
Amplifier Classification D2AudioTM* DSP controlled, Class-D amplifier system. High current switch mode power supply (smpsu)
Equalisation 4 Settings (Off/Music/Movie/Impact)
Phase Control 0-90-180-270 degrees
Auto Sensing Input Level Requirements Line Level > 2mV. Standby after 10 minutes if no signal sensed
Digital Volume Level -60 to +10dB in 1dB increments
Drive Unit Complement 1 x 15” C-CAM® sub-woofer driver featuring triple suspension
3” long throw voice coil
12V Trigger Input 3.5mm mono jack socket
Connections Stereo RCA in/out
LFE in/out
12V Trigger in (3.5mm mono jack)
LEO* - 3.5mm Microphone input jack (microphone supplied)
Input Impedance 20 kohms
Dimensions (H x W x D) 430 x 400 x 400 mm (16 15/16 x 15 3/4 x 15 3/4 Inches)
Grille Depth 28 mm (1 1/8 Inches)
Weight (unpacked) 35.3 kg (77.6 lbs)
Mains Input Voltage 100 - 120 Vac / 220 - 240 Vac 50/60 Hz (Factory preset)
Electrical Certifications CE/CB/ETL/Fcc/ErP (Energy saving compliant)
Power Consumption Maximum 1000W. Standby
Fuse Type 20mm UL/VDE (Value is region specific)
IR Remote Control Code NEC SH6122
|
Technical features 500W class 'D' power amplifier
Description Active closed-box subwoofer system
Drive unit 1x f250mm (10 in) paper / Kevlar® cone long-throw
Frequency range -6dB at 18Hz and 40/140Hz adjustable (EQ at A)
Frequency response ±3dB 25Hz – 40/140Hz adjustable (EQ at A)
Power output: 500W
Rated power consumption: 94W
Input impedance: 33kΩ
Signal / noise: >80dB
Functions: Input Level (line in)
Input Level (speaker in)
Low-pass filter frequency
Low-pass filter bypass (line in only)
Bass extension
Bass roll-off alignment
Auto sense on/standby
Phase switch
Inputs: Line In (RCA Phono)
Speaker Level In (Binding post)
Low-pass filter Active 4th-order, variable cut-off frequency
Height: 325mm 12.8 in)
Width: 325mm (12.8 in)
Depth: 362mm (14.3 in)
Net weight 15.5kg (34.4 lb)
Cabinet Gloss Black
AVAILABLE IN gloss black,wenge,rozenut COLORS
|
Reviews
There are no reviews yet.