| Content |
4 Channel Dj mixer with 4 line IN, 4 phono IN, 1 mic IN, 3 band EQ each channel with kill, Input gain control, 1 master OUT balanced XLR. USB Input.
FUNCTIONS
*Digital connection is available by installing the USB board to the front panel of the VMC-004XLu. The input signal sent through USB is assigned to PGM4 and outputted from MASTER.
*MULTI INPUT 4 CHANNEL MIXER : The total of 10 OUTPUT CHANNELS (phono×4, line stereo×4, mic×2) and 2 stereo outputs that can set master volumes individually has been applied to this model to live up to the DJ scene today where both analog turntables and CD players are becoming a necessity.
*MASTER OUT : 1 also includes a volume control, and the entire output system has been enhanced while still in its compact form.
*INPUT LED METER and TRIM control : Each designated channel has an input LED meter, and trim control, allowing to double check input levels on the fly.
*THREE BAND ISOLATER LIGHT : Not an equalizer, but a 16 dB/oct ISOLATER LIGHT, a first in its class has been added to each and every channel to allow top sound and performance quality.
*CF ASSIGN SWITCH : By using the three point switch, the cross fader can be assigned to any channel allowing several creative mixing ways and source use.
*INPU.The rotary and slide faders exclusively from ALPS for Vestax have been a standard, however the cross fader may be upgraded to the plastic conductive fader, CF-PCV.
*The VMC includes a cross fader switch allowing you to adjust the curves for either a smooth long mix or for a cutting in/out mix.
*With a rotary style switch, the MONITOR, in stereo can be handled in a swift and selective way.
*MASTERThe PHONO EQUALIZER uses the same technology used for our professional series mixers.
*INPUT LED M2 grand terminals and head phone jacks have been reinforced with a metal sleeve and various other parts for durability and longevity.
SPECS
| Input | Line In (RCA-STEREO) x 4
Phono In (RCA-STEREO) x 4
Mic In (φ6.3PHONE) x 2 | | Output | MASTER(RCA-STEREO) x 2
MASTER(XLR-STEREO) x 1
Headphone (1/4 inch HeadPhone Jack) x 1 | | Dimension(s) / Weight | 327(W) x 110(H) x 260(D)mm / 6.5kg | | Replacement Faders | CF-05mk4
CF-PCV (Option) | | Power | AC-14 |
|
- Type Analog
- Channels 4 + 1
- EQ 3-band / Total Kill (CH 1-4 + CH A)
- USB Soundcard 20 Channel (10 in / 10 out)
USB2 / Class Compliant
24bit / 96kHz
1 x MIDI IN
1 x MIDI Out - Line Inputs 4 x RCA (CH 1-4)
1 x 1/4″ TRS (CH A) Mono/Stereo - Phono Inputs 4 x RCA (CH 1-4)
LN/PH Switch for DVS - USB Inputs 5 x USB (CH 1-4 + CH A)
- Mic Input 1 x XLR
- Master Output 1 x XLR (Balanced)
- Master 2 Output 1 x RCA (Un-balanced)
- Booth Output 1 x 1/4″ TRS
- Record Output 1 x RCA (Un-balanced)
- Master Insert 1 x 1/4″ TRS
- MIDI Sync/Out 1 x 5-Pin DIN
DIN Offset Control - Send/Return I/O
1 x 1/4″ TRS Send
1 x 1/4″ TRS Return
1 x LN/Hi-Z Switch
- Internal Xone:FX Yes
- Hybrid FX Mode Yes (Internal External)
- FX Send 1 x Pre/Post Selectable (CH 1-4 + CH A)
- Filter
1 x VCF Filter
HPF / BPF / LPF
Adjustable Frequency & Resonance
Assignable CH 1-4 + CH A + External Return - X-Link 1 x RJ45
- Headphones
1 x 1/4″
1 x 3.5mm
Split Cue Monitoring - Channel Faders 60mm VCA / Replaceable
- Chanel Meters 12 Segment LED
- Channel Fader Curve 3 Types
- X-Fader 45mm VCA / Replaceable / Innofader Compatible
- X-Fader Curve Settings 3 Types
- MIDI Clock Send + Receive
Start / Stop / Pause / Tempo Bend (-/+) - MIDI Assignable Yes (MIDI CC / MIDI Notes)
- BPM Detection Auto / Manual / Tap Tempo
- Earth Ground Terminals x 2
- Headroom 20dB
- AC Mains
100 to 240V
AC 50/60Hz
Consumption 35W max - Mains Adaptor 3 pin IEC socket with cable clamp
- Fuse Rating 250V AC T1AL 20mm
- Height 4.3″
- Width 12.6″
- Depth 14.8″
- Weight 11.5 lbs.
| Versatile all purpose 8 channel laptop and 19” rack installation mixer, COMPACT 8 inherits and enhances the shockproof and flexible technology of COMPACT5 unit in a revolutionary design for a mixer of its characteristics. Specially developed for applications requiring a large number of microphone and stereo signals.
Easy of use, suitable for both non technical and experimented users, COMPACT 8 gathers all what can be expected from an installation pro audio mixer.
* Universal 8 channel laptop and 19” installation rack mixer
* 3 Phono inputs
* 7 Stereo Line RCA inputs plus AUX in front panel
* 8 microphone COMBO connector inputs
* 2 independent outputs (XLR3 and RCA)
* Additional REC output
* ±15 dB 3 band tone control featuring mids 300Hz-6kHz semi-parametric equalization
* Headphones output for PFL and MIX monitoring
* New extra bright 12 position VU-meter
* Assignable talkover with EFFICIENCY and TIME adjustments
* 60 mm high quality faders
* 4 RU
* 5.2 kg
* A/V presentations
* Entertainment music playback
* Meeting and seminar rooms
* Education Centres
* Pubs and disco bars
* Mobile outdoor applications |
- 5 input channels with gain control, 3-band equalizer, cue button and super-smooth channel fader
- 1 DJ microphone channel with talkover selector and 2-band equalizer
- Pre-fader listening to all stereo input channels and the master output via adjustable stereo headphones output
- Replaceable crossfader for crossfading between input channels with assignment switches
- 10-digit stereo LED level meter, master level control, and balance level control
- Adjustable zone output, and record output, independent of the master
- Inputs: 6x line (stereo RCA), 2x phono/line (stereo RCA), switchable; 2x microphone (6.3 mm jack), 1x microphone (XLR/6.3 mm jack) and headphones (6.3 mm jack)
- Outputs: master (3-pin XLR, stereo RCA), zone and record (both stereo RCA)
- Operation via supplied power unit
- Rack installation, 4 U
| Power supply: |
230 V AC, 50 Hz ~, |
|
via supplied power unit |
| Power consumption: |
30 W |
| Inputs: |
| DJ MIC (front): |
combined XLR (3-pin)/ 6.3 mm jack (1/4“) (bal.) |
| MIC 1,2 (rear): |
6.3 mm jack (1/4“) (bal.) |
| Impedance: |
1 kohms |
| Minimum input voltage: |
1.5 mV RMS |
| LINE 1-5: |
stereo RCA |
| Impedance: |
27 kohms |
| Minimum input voltage: |
150 mV RMS |
| PHONO 1,2: |
stereo RCA |
| Impedance: |
47 kohms |
| Minimum input voltage: |
3 mV RMS |
| Outputs: |
| MASTER: |
stereo RCA, stereo XLR (3-pin) |
| ZONE: |
stereo RCA |
| Impedance: |
400 ohms |
| Output voltage: |
1 V RMS/ 0 dB |
| REC: |
stereo RCA |
| Impedance: |
5 kohms |
| Output voltage: |
225 mV RMS |
| Headphones: |
6.3 mm stereo jack (min. 16 ohms) |
| Tone control (DJ MIC): |
| 1x High: |
-12 dB to +12 dB/ 1 kHz, ±1 dB |
| 1x Low: |
-12 dB to +12 dB/ 1 kHz, ±1 dB |
| Tone control (channels 1-5): |
| 5x High: |
-12 dB to +12 dB/ 1 kHz, ±1 dB |
| 5x Mid: |
-12 dB to +12 dB/ 1 kHz, ±1 dB |
| 5x Low: |
-12 dB to +12 dB/ 1 kHz, ±1 dB |
| S/N ratio: |
>80 dB |
| Frequency range: |
20-20,000 Hz |
| Distortion: |
0.02% |
| Dimensions (WxHxD): |
483 x 179 x 94 mm (19“, 4 U) |
| Weight: |
4 kg |
|
- 6 input channels
- MIC (XLR3) inputs on channels 1 and 2
- MIC (JACK ¼”) / stereo LINE (RCA) in channels 3 and 4. Input signal pushbutton selector (MIC/LINE) on back panel
- Stereo LINE (RCA) on channels 5 and 6
- Input signal gain level control (accessible only with screwdriver)
- Each channel features signal present (SP) and CLIP indicators
- General phantom power switch located on back panel. Independent internal phantom power assignment to any MIC input
- Triple tone control (accessible only with screwdriver)
- 2 main stereo OUTPUTS (XLR3) with independent volume control
- 3 LED OUTPUT level meter
- Input channels can be routed to any main output (A,B) or both
- 2 additional stereo REC outputs (REC1, REC2)
- Mono mode selector in outputs A and B
- Headphones monitoring of selected output (A or B)
- Integrated, internally configurable talkover. Affects OUT A and REC A
- Remote MUTE function (PHOENIX) allows linking to external fire detection centrals
- TALKOVER function fully configurable to –20dB or –30dB that affects boths outputs A and REC A
The SAM mixer series has been specially designed for all public address and communication systems requiring a minimum risk of unwanted external manipulation.
Frequently used controls are easily accessible. Specific adjustments remain only accessible by the installer for precise and permanent settings.
SAM SERIES are very easy to use, even for non-technical users. All this is packed into a compact, 1 unit high, 19'' rack unit.
SAM series general KEY features
- Universal 1 RU, 19” installation mixers
- Excellent frequency response
- Balanced MIC and stereo LINE inputs and main outputs
- Reliable proprietary power supply
- Ideal for any application requiring a trouble free mixer
|
The DN-X1700 represents an important achievement by Denon\'s R&D department, which, during the development process, worked closely with some of the top professionals in the industry, gaining key input on its design and functionality. The result is a market driven professional digital mixer that is best in its class. Years of consultation and design have gone into the development of a mixer of this caliber, and nothing in its specification and construction has been sacrificed. Meticulous attention to detail, layout and component quality make operation of the DN-X1700 extremely intuitive, and Denon\'s engineers have provided every capability professional DJs will require: working with vinyl turntables, CD decks, media players, DJ software applications via laptops and USB storage devices.
Features
- 4-channel digital DJ mixer with studio quality components & specifications
- World\'s first professional DJ mixer with 32-bit DAC output
- 24 bit 96kHz USB 2.0 audio interface (soundcard) 4-in/4-out (stereo)
- MAC OSX 10.5.7 and 32-bit windows compatible
- Low latency ASIO driver for PC included
- USB MIDI In/Out and 5-pin MIDI Out
- MIDI mapping for various software is available
- Dual layer control available - MIDI/Normal Audio
- 2 independent effectors with 12 effects available for each:
Delay
Echo
Trans
Flanger
Filter
Phaser
Reverb
Loop
Rev. Loop
Pitch Shift
BeatBreaker
Send/Return
- 2-way EFX Parameter Filter (LPF/HPF)
- Independent EFX 1 & 2 Insert for, Channel, Mic & Master
- Matrix Input Assignment for Line/Phono and selectable USB Audio, Digital Input
- Discrete FET phono preamp stage (4 phono inputs)
- Discrete Mic Circuit w/studio mixer quality specs
- Discrete high powered headphone amp with studio mixer quality specs
- 45mm cross fader (flex fader) w/tension adjust & A/B cut position preset
- 60mm CP studio quality Alps K-Type channel fader
- Fader Contour control for channel and cross fader
- Fader Start function (channel/cross fader)
- Cross fader assignment function: (A, B, Thru)
- Independent 3-band isolator EQ w/Kills (High-Mid-Low)
- 3.5" TFT Color Display w/animated easy navigation
- 4 Digital Inputs (coaxial)
- Selectable digital output (44.1/48/96kHz)
- Balanced/Unbalanced master output
- Balanced booth output
- 2 mic input with ducking level control
- Send/Return for external effectors
- Extensive utility menu to customize user settings
- Preset import/export function by USB memory device (take your settings to another X1700 mixer)
- High resolution 24 segment output peak meters
- Dual power transformer construction for best possible specs (Digital/Analog sections)
- Output Limiter function w/adjustable threshold (great for Club installers)
|
Reviews
There are no reviews yet.