| Content | Instrument wireless system
Xvive U2 guitar system features digital wireless technology that delivers incredible audio quality, simple setup, and is extremely reliable for any gigging musicians. It delivers a full 20Hz-20 kHz frequency response, so youʼll hear your guitar tone in great detail with only 6ms of latency. This wireless system operates at 2.4GHz ISM band for crystal clear broadcasting ensuring the integrity of your signal on stage and covers 100 feet of range without any signal dropout. The Li-ion batteries help makes the U2 wireless system environmentally friendly that can last up to 5 hours per charge. The chassis is made out of a durable ABS plastic that can withstand the rigors of touring and the harshest of climates. This wireless is a perfect fit for any pedal board thanks to its simplistic, and compact design. So, go wireless with the Xvive U2 system. Itʼll declutter the stage and offers freedom in motion
SPECIFICATIONS
Tuning Bandwidth
Working Range
Audio Frequency Response
Dynamic Range
Battery Life
RF Sensitivity
Total Harmonic distortion
RF Output Power
Operating Temperature Range
Channel Count
Maximum Level
Sample Rate
2400 – 2483.5MHz
>70 feet Line-0-site outdoors. Actual range depends on RF signal
absorption, reflection and interference.
20Hz – 20KHz(-3dB). Dependent on microphone type or Input signal.
>103dB
Up to 5 hours (3.7V Rechargeable Li-lon, 650mA)
-85dBm
0.2%
10 mW E.I.R.P. max
-18ȭ to 57ȭ. Battery characteristics may limit this range.
up to 4 Channels
Input: 5.6Vp-p Output: 5.6Vp-p
24bit/48K Hz uncompressed digital transmission |
System Specifications
Operating Frequencies: UHF band
Band C: 541.500 MHz to 566.375 MHz (996 frequencies)
Band D: 655.500 MHz to 680.375 MHz (996 frequencies)
Band I: 482.000 MHz to 507.000 MHz (1001 frequencies)
Not all frequencies are available in all areas. Please check with local regulations.
Minimum Frequency Step: 25 kHz
Modulation Mode: FM
Maximum Deviation: +/-35 kHz
Dynamic Range: > 110 dB (A-weighted), typical
Total Harmonic Distortion:
Operating Range: 100 m (300'), typical
Open range environment with no interfering signals.
Operating Temperature Range: -5o C to +45o C (23o F to 113o F)
Battery and LCD performance may be reduced at very low temperatures.
Frequency Response: 70 Hz to 15 kHz (+1 dB, -3 dB)
Receiver
Receiving System: True diversity
Image Rejection: 60 dB nominal, 55 dB minimum
RF Sensitivity: 20 dBuV at 60 dB S/N ratio
Maximum Output Level: XLR, balanced: +9 dBV; 1/4-inch (6.3 mm), unbalanced: +7 dBV
Antenna Input: BNC-type, 50 ohms
Bias voltage 12V DC, 60 mA, each
Power Requirements: 12-18V DC, 500 mA
Dimensions: 210.0 mm (8.27“) W x 164.4 mm (6.47“) D x 44.0 mm (1.73“) H
Not including BNC connectors or feet.
Net Weight: 1.1 kg (38.8 oz), without accessories
Accessories Included: Two flexible UHF antennas; AC adapter (country dependent); rack-mount adapters
Body Pack
RF Power Output High: 30 mW, Low: 10 mW (switchable), at 50 ohms
Spurious Emissions: Following federal and national regulations
Input Connection: Four-pin Locking Connector
- Pin 1: GND
- Pin 2: INST INPUT
- Pin 3: MIC INPUT
- Pin 4: DC BIAS +5V
Batteries: Two 1.5V AA, not included
Battery Life:
- High: 6 hours (alkaline)
- Low: 8 hours (alkaline)
Depending on battery type and use pattern.
Dimensions: 66.0 mm (2.60“) W x 24.0 mm (0.94“) D x 87.0 mm (3.43“) H
Net Weight: 81 g (2.9 oz), without batteries Dimensions and Weight in PackagingChannel DShipping Weight: 5 lbs Shipping Dimensions: 15 x 13 x 4 in Channel CShipping Weight: 5 lbs Shipping Dimensions: 15 x 13 x 4 in Channel IShipping Weight: 6 lbs Shipping Dimensions: 15 x 14 x 4 in |
- The ACT-818 is a 1/2U single channel rack-mountable receiver with metal chassis.
- A full-color VFD (vacuum fluorescent display) provides clear viewing of all parameters. All controls are intuitive and easily accessible, allowing for quick and easy system setup via a single rotary control.
- Enhanced RF circuitry improves anti-interference characteristics and system compatibility with a 64 MHz-wide bandwidth, allowing more interference-free channels to be selected.
- New digital diversity receiving technology eliminates signal dropout and enhances receiving range.
- Full-range sound quality is not affected by the strength of RF signals or operating distance.
- Digitally-processed RF circuitry and DigitnamicPlus™ technology eliminates compander noise, assuring a wireless sound quality that easily rivals cable transmission.
- Improved proprietary Audio A/D Converter provides a true dynamic range of 115 dBA, T.H.D.
- AES3id Digital Audio Interface facilitates a direct connection to digital mixing consoles and transmits signal without distortion, ensuring a stable S/N ratio which will not deteriorate in long distance transmission.
- Proprietary 256-bit encryption provides secure audio transmission, preventing unauthorized listening.
- 10 built-in SmartEQ™ presets and user-defined microphone capsule equalization allows faithful sound reproduction to suit artistsʼ preferences.
- 10 built-in digital anti-feedback SmartEQ™ presets minimize feedback effectively without sacrificing sound quality.
- Optional MIPRO RCS2.Net software allows real-time network remote-controlling and monitoring of 64 systems.
| | Frequency Range | 480~544MHz（US & EU）
540~604MHz（US & EU）
636~700MHz（EU）
696~760MHz（EU）
760~824MHz | | | | Bandwidth | 64 MHz | | | | Preset Frequency | 12 non-interference compatible frequencies in group 1-10.
16 non-interference compatible frequencies in group 11-16.
16 user-defined frequencies can be stored in group 18.
216 preset frequencies in total. | | | | Channel Grid | 25 kHz | | | | Channel Set-up | Scan & ACT sync | | | | Audio Sampling | 24-bit / 44.1 kHz Rate | | | | Audio Compression | 2nd Generation DSP inertial coding | | | | Latency | | | | | Frequency Response | 20 Hz~20 kHz (-2dB) | | | | S/N Ratio (analog output) | > 115dB(A) | | | | T.H.D. | | | | | Encryption | 256 bit | | | | Receivers | | | | Chassis /Channel | EIA Standard 19 " 1/2U, Single | | | | Sensitivity | 15 dBμV at S/N≒118 dBA | | | | Image and Spurious Rejection | > 85dB | | | | Receiving Mode | Digital Diversity | | | | Analog Output | Balanced XLR × 1
Unbalanced 6.3 mm (1/4 ") × 1 | | | | Analog Output Switch | Mic / Line × 1 | | | | Digital Audio Interface | AES3id output. BNC female × 1 | | | | Digital Equalizer | 10 microphone capsule modeling presets | | | | Digital Anti-feedback Equalizer | 10 anti-feedback microphone capsule modeling presets | | | | PC Interface | USB or RS-232 Interface. Proprietary MIPRO ACT-BUS | | | | Display | Full-color VFD | | | | Battery Meter | Transmitter battery status | | | | Antenna Input | 50Ω TNC Female Connector × 2 | | | | Power Supply | External AC power supply, 12~15V DC, 1A; Power Consumption: 7.5W | | | | Dimensions (W×H×D) | 210 × 44 × 230 mm (8.3 × 1.7 × 9 ") | | | | Weight | Approx. 1.1 kg (2.4 lbs) | | | | Transmitter | ACT-80H / 80HC Handheld, ACT-80T / 80TC Bodypack & TA-80 Plug-on Transmitter | | | | Operating Temperature | -10~+60 ℃ | | | | Notes | Refer to actual product in the event of product description discrepancy.
Frequency range and maximum deviation comply with the regulations of different countries. |
|
VWTTM
Exclusive VWT (Virtual Wire Transmission) technology ensures full-range frequency response, excellent transient response, and wide dynamic range - just like a high-quality guitar cable.
Superior specs.
Relay digital wireless systems produce full-range tones with 10Hz-20kHz frequency response, exceedingly low noise with up to 120dB dynamic range, and studio-quality resolution with 24-bit A/D conversion. (Comparably priced analog wireless systems offer 50Hz-15kHz frequency response and >90dB dynamic range. This wreaks havoc on your tone, especially if you use a high-gain amp.)
Cable tone simulation.
Using a cable and a wireless system? Now you can switch back and forth without having to adjust the tone settings on your amplifier. Relay digital wireless systems feature a Cable Tone Simulator, which lets you match the sound of your Relay to the sound of your cable.
Compander free.
Companders squash your signal and ruin your tone. Analog wireless systems require companders but Relay wireless systems do not. Remaining compander-free enables Relay to deliver a beautiful high-end sparkle, thunderous low-end punch, and touch response that analog wireless systems simply cannot deliver.
| | Metal 1U Rack System | | Transmission Format | Line 6 proprietary digital audio transmission | | Frequency Response | 10Hz - 20kHz | | Dynamic Range | 120 dB | | RF Carrier Frequency | 2.4GHz | | Operating modes | RF1
RF2 | | Compatible Channels | 14 | | Transmission Range | 300 feet line-of-sight (may vary due to local conditions) | | FCC Approval | Part 15 approved, no user-license required | | Transmitter Specs | | | TBP12 Transmitter | | A/D Conversion | 24-bit Delta Sigma, 128 times oversampling | | Input Impedance | 1.3 M-Ohm | | Connectors | TA4f | | Controls | Power On/Off, Channel Select | | LEDs Display | Power, Audio Status | | LCD Display | Channel Number, Battery Life | | Battery Life | Approx. 8 hours (2x AA alkaline batteries) | | Receiver Specs | | | RXR12 Receiver | | D/A Conversion | 24-bit Delta Sigma, 128 times oversampling | | Connections | 1/4-inch output, XLR output; Tuner pass-thru | | LEDs Display | Audio Status, Transmitter Battery Life, Mute, RF | | LCD Displays | Channel Number, Transmitter Battery Life | | Controls | Channel select, Cable Tone Simulator, Setup | | Power Requirements | IEC connector for internal switching power supply that works worldwide |
| Free yourself! for live sound, presentations and installations
The WMS420 wireless microphone system provides a highly flexible as well as easy to use solution. The ultra high frequency system is set up within seconds and is equally suitable on stage as well as in locations where a single- or multi channel solution is needed.
The entire WMS420 wireless system consists of the SR420 stationary receiver, HT420 handheld transmitter and the PT420 pocket transmitter. The HT420 handheld transmitter is available with the patented D5 dynamic microphone acoustic. This capsule guarantees maximum rejection against feedback, reduced handling noise and the famous AKG sound. Both transmitters are shipped with charging contacts that enable the use of rechargeable batteries. Moreover the transmitters offer exceptional eight hours of operation time from a single AA size battery, which dramatically reduces the operating costs in day-to-day use.
The detachable receiver antennas allow the use of professional accessories, such as antenna splitters and remote mounted directional antennas for multi channel systems. The WMS420 series includes three different bodypack sets. The head-worn set includes the high performance C555L condenser microphone. The presenter set includes the professional C417L lavalier microphone. The guitar set includes an instrument cable. With the AKG WMS420 system up to eight channels can be run simultaneously.
Detachable receiver antennas
enable the use of professional RF accessories
Patented state-of-the-art D5 dynamic capsule
cuts through the mix
Transmitters with charging contacts
saves money in day-to-day use and preserves the environment
Compatible with all AKG MicroMics
almost all applications can be covered
Low battery warning indicator
for secure operation
| The WMS 40 Mini Instrumental Set ensures brilliant sound and ease of use at an unbeatable price/performance ratio.
Unique HDAP (High Definition Audio Performance) technology ensures the best possible, most realistic sound at any time.
The SR 40 Mini receiver provides three status LEDs indicating ON/OFF status, received signal strength (RF OK), and audio clipping (AF CLIP). The VOLUME control sets the level at the ¼" output jack. The supplied switched mode power supply operates on any AC voltage from 110 to 240 VAC and includes EU, UK, and US adapters.
The PT 40 Mini bodypack is probably the smallest and lightest transmitter in its class. A reliable mini XLR output allows you to connect every compatible AKG miniature microphone. Battery life of the transmitter is the same legendary "30 hours off a single AA battery" as for the WMS 40 models, reducing the need to replace batteries and thus saving real money in the long run.
The system includes an SR 40 MINI receiver, a PT 40 MINI pocket transmitter, a MKG L instrument cable, a universal power supply with US/UK/EU adapter, and one AA size dry battery.
User's Manual |
Reviews
There are no reviews yet.