| Content | Adjustable heavy-duty studio monitor stand set suitable for studio monitor speakers up to 8 inch. The stands are adjustable between 34cm and 49cm in height. Comes supplied including 8 anti-vibrating caps and a foam anti-slip topping to stick on the top if required.
- Universal fit for all Studio monitors up to 8“
- Quick and easy to setup and adjust
- Metal upright sections with black finish
- Adjustable height: 340 - 495mm
- Supplied with allen key, anti-slip topping and feet
- Maximum load 20kg per stand
| Height |
340mm |
| Max. load |
20kg |
| Max. height |
495mm |
| Tube |
Top 35mm / Bottom 40mm |
| Dimensions: Folded |
220 x 230mm (Topplate) |
| Dimensions |
240 x 240mm (Bottomplate) |
| Weight |
5kg |
| Features
- Sturdy construction for use with extremely heavy studio monitors
- Adjustable spikes to compensate for uneven floors
Specifications
- Material: steel
- Color: black
- Height: 105 cm
- Maximum load capacity: 60 kg
- Pole diameter: 100 mm * (2.0 mm material thickness)
- Support plate: 500 x 350 mm (6.0 mm material thickness)
- Base plate: 600 x 450 mm (6.0 mm material thickness)
- Weight: 29 kg?
Scope of delivery
Applications
- Speaker stand in recording or project studio
- Speaker stand in band rehearsal room
- Speaker stand for installation and in conference rooms
| The Gravity studio monitor stand GSP 3202 VARI-TILT® features a heavy, triangular base made of cast iron and a 25x25 cm steel tray with isolating foam rests. It is tilt-adjustable by 10° and height-adjustable from 90 to 150 cm for optimum speaker positioning. The stand is supplied with a set of spikes. Mounted on the large, integrated rubber feet, these ensure effective coupling to the floor.
Product type
Stands and Tripods
Tubing surface
Powder coated
Height adjustment
Clamp with safety pin
Base edge length
292.5 mm
Tubing diameter
42 mm / 35 mm
Centic load capacity (without spikes)
30 kg
Centic load capacity (with spikes)
10 kg
Interchangeable rings
1 x 15 mm, 1 x 20 mm, 1 x 30 mm
Black ring pack included
Yes
Additional information
Including acoustic isolation spikes
|
These Monitor stands feature cabinet quality top plates, cable management, Metal base spikes,
and the ability to add shot or sand internally. They are also great for living rooms to get those
expensive speakers up to ear level and produce the sharpest and clearest sound possible.
Cable management runs from top to bottom. A plastic strip snaps in to back to retain and hide
cables. This unique feature has two channels to prevent interference when using non-balanced cables.
It also keeps the cables out the center channel when you weight the stand with shot or sand. | Xαρακτηριστικά :
Eιδικά κατασκευασμένες βάσεις δαπέδου για τα ηχεία Wharfedale Linton
Kομψός σχεδιασμός
Προσφέρει εξαιρετικό damping
Tοποθετεί τον άξονα ακρόασης του ηχειου , στο βέλτιστο σημείο
Διαστάσεις (YxΠxB): 43,68 x 29.97 x 33.02 cm. | A mix's sound and feel is heavily influenced by having your monitors placed in the proper position. In a home studio, however, where space is at a premium, it's not always possible to put your studio monitors right next to a table using suitable stands. The Gravity SP 3102 is the solution to this problem. The flexible, powder-coated steel stand squeezes onto pretty much any desk. The edge of the solid base is only 25 cm in length. Monitor boxes weighing up to 25 kg can be flexibly positioned at the height you want, and EVA padding and tilting protection make it possible to vertically angle them by up to 15° and horizontally rotate them 360°, meaning you can always find the perfect position for your studio monitors. The colourful G-rings make a clear design statement and can be swapped out in mere seconds. An additional black ring set is also supplied with the product.
Product type
Stands and Tripods
Tubing surface
Powder-coated
Bearing surface
240 x 250 mm , EVA padded
Height adjustment
Adjusting screw
Interchangeable rings
1 x 20 mm , 1 x 30 mm
Black ring pack included
Yes
|
Reviews
There are no reviews yet.