| Content | Adjustable heavy-duty studio monitor stand set suitable for studio monitor speakers up to 8 inch. The stands are adjustable between 34cm and 49cm in height. Comes supplied including 8 anti-vibrating caps and a foam anti-slip topping to stick on the top if required.
- Universal fit for all Studio monitors up to 8“
- Quick and easy to setup and adjust
- Metal upright sections with black finish
- Adjustable height: 340 - 495mm
- Supplied with allen key, anti-slip topping and feet
- Maximum load 20kg per stand
| Height |
340mm |
| Max. load |
20kg |
| Max. height |
495mm |
| Tube |
Top 35mm / Bottom 40mm |
| Dimensions: Folded |
220 x 230mm (Topplate) |
| Dimensions |
240 x 240mm (Bottomplate) |
| Weight |
5kg |
| Isolation Pad for Studio Monitors 265 x 330 mm
The ah PAD series is designed to isolate studio monitors acoustically, i.e., avoid disturbing resonances with the surface on which they stand, which results in a significantly improved sound. The two-component design results in three possible combinations (horizontal placement + two different angles.
Product type
Other Studio and Recording Equipment
Material
High density acoustic foam
Colour
charcoal
Setup
2-layer
Foam density
38 kg/m
Width
265 mm
Height
40 mm
Depth
330 mm
Weight
0,22 kg |
- Height Adjustable Near-Field Monitor Stand
Speaker plate dimensions: 9” square - 23 cm square
Height Positions (5): 30.7”, 34”, 37.4”, 40.7”, 44” - 78, 86.5, 95, 103.5, 112 cm
Base Size: 14.5” x 16.1” - 37 x 41 cm
Weight capacity: 125 lb - 57 kg
Weight: 11.1 lb - 5 kg
|
These Monitor stands feature cabinet quality top plates, cable management, Metal base spikes,
and the ability to add shot or sand internally. They are also great for living rooms to get those
expensive speakers up to ear level and produce the sharpest and clearest sound possible.
Cable management runs from top to bottom. A plastic strip snaps in to back to retain and hide
cables. This unique feature has two channels to prevent interference when using non-balanced cables.
It also keeps the cables out the center channel when you weight the stand with shot or sand. |
Mastering and mixing professionals usually listen to music in ideal conditions in control rooms specifically designed for mastering and mixing. Studio monitors are either built into the wall or installed on expensive stands positioned just far enough away from studio furniture so that nobody can accidentally bump into them. In day-to-day life, however, most musicians, producers, podcasters, etc., put their monitors right on the table. Not because this is the best solution, but because there's not enough space available.
Even if you invest in a good table stand in this case, you still have to live with the fact that people might walk by or carelessly move the entire structure and destroy your optimum listening set-up. Regular stands for studio monitors also need a lot of room on the table due to their lower base plate.
Gravity® has tackled all these problems with the SP 3102 TM. The studio monitor stand features a table clamp to securely and safely attach the structure to tables with tabletops no thicker than 100 mm. Just like other Gravity® products, it can be tightened using a sturdy and handy knob. In contrast to conventional table stands which require a large base plate to not budge, SP 3102 TM's clamp base is only 10 × 7 cm and does not take up more space than a standard screen holder. The design of the studio monitors stands ensures that they do not stick too far out off the table. This ensures a greater distance between the listener and monitors even when tables aren't that deep, as well as the perfect speaker placement to find the sweet spot in the room.
Everything stays put with the SP 3102 TM thanks to its clamp that keeps stands fixed in position. In addition, the SP 3102 TM is fully equipped to help you perfectly align the monitors into the listening position. The stand has clearly visible markings to adjust the height, rotation, and tilt. There's also EVA padding and an anti-tipping device to make sure your valuable monitors rest securely on the upper shelf, even when tilted up to 15°. You can now sit back and enjoy the sweet spot!
Product type
Stands and Tripods
Tubing surface
Powder-coated
Bearing surface
240 x 250 mm , EVA padded
Height adjustment
Adjusting screw
Base edge length
100X70 mm
Interchangeable rings
1 x 15 mm , 2 x 30 mm
Black ring pack included
Yes
| Features
- Sturdy construction for use with extremely heavy studio monitors
- Adjustable spikes to compensate for uneven floors
Specifications
- Material: steel
- Color: black
- Height: 90 cm
- Maximum load capacity: 60 kg
- Pole diameter: 100 mm * (2.0 mm material thickness)
- Support plate: 500 x 350 mm (6.0 mm material thickness)
- Base plate: 600 x 450 mm (6.0 mm material thickness)
- Weight: 27 kg?
Scope of delivery
Applications
- Speaker stand in recording or project studio
- Speaker stand in band rehearsal room
- Speaker stand for installation and in conference rooms
|
Reviews
There are no reviews yet.