| Content |
JBL VRX915M 15'' 2-way 800W RMS Stage Monitor
Key Features :
Compact and low-profile for minimal obstruction of audience sightlines
50 x 90 nominal coverage
Bi-amplified or full-range passive operation
Differential Drive woofer with neodymium magnet for high power capacity and very light weight
4" (voice coil) diameter compression driver with neodymium magnet
Specifications:
|
Frequency Range
|
:
|
60 Hz - 20 kHz
| |
Frequency Response
|
:
|
70 Hz - 20 kHz
| |
Coverage Pattern
|
:
|
50 x 90 nominal
| |
Crossover Modes
|
:
|
Passive / Bi-amp
| |
Crossover Frequency
|
:
|
1.1 kHz
| |
Power Rating2 (Continuous / Program / Peak)
|
:
|
Passive Full-Range 800 W / 1600 W / 3200W, 2 hrs1 Passive Full-Range 600 W / 1200 W / 2400W, 100 hrs
| |
System Maximum SPL
|
:
|
127 dB SPL continuous (133 dB SPL peak)
| |
System Sensitivity (1w @ 1m
|
:
|
98 dB SPL
| |
LF Driver
|
:
|
1 x JBL 2265H 380 mm (15 in) Differential Drive?? woofer 8 Ohms
| |
HF Driver
|
|
1 x JBL 2452H, 100 mm (4.0 inch) diameter voice coil, 38 mm (1.5 inch) exit, neodymium magnet compression driver 8 Ohms
| |
Nominal Impedance
|
:
|
8 ohms
| |
Active Tunings
|
:
|
Tunings available at www.jblpro.com
| |
Enclosure
|
:
|
Symmetrical stage monitor, 15/18 mm, plywood
| |
Finish
|
:
|
Black DuraFlex finish
| |
Grille
|
:
|
Powder coated, black, 16 gauge perforated steel with acoustically transparent black screen backing
| |
Input Connectors
|
:
|
Neutrik Speakon NL-4 (x2), one on each end
| |
Dimensions (H x W x D)
|
:
|
629 mm x 432 mm x 324 mm (375 mm stage height) 24.75 in x 17 in x 12.75 in (14.75" stage height)
| |
Net Weight
|
:
|
21 kg (46.0 lb)
|
|
Features :
Compact and low-profile for minimal obstruction of audience sight-lines.
70°x 70° nominal coverage.
Bi-amplified or full-range passive operation.
Pole socket for applications requiring pole or tripod mounting.
High power handling, low distortion Vented Gap Cooling™ LF driver.
3 in. (diaphragm) neodymium magnet compression driver.
Rugged DuraFlex™ coated enclosures sized to be truck pack friendly.
14-Gauge steel grille lined with acoustically transparent cloth.
Specifications :
Frequency Range ( –10 dB) : 50 Hz-20 kHz
Frequency Response (± 3 dB) : 75 Hz-20 kHz
Coverage Pattern : 70˚ × 70˚ nominal
Sensitivity (1W/1m) : 95 dB
Power Rating
(Cont. Pink Noise/Program/Peak) : 800 W / 1600 W / 3200 W
(Continuous/Program/Peak)
Rated Maximum SPL : 130 dB SPL Peak
Nominal Impedance : 8Ω
Input Connectors : Two NL4
Operational Modes : Full Range/Bi-Amp
Dimensions (H x W x D) : 571 mm x 355 mm x 264 mm
(22.5" x 13.4" x 10.4“)
Net Weight : 19 kg ( 42 lbs)
![acrobat_reader_logo.]( "acrobat_reader_logo.") User's Manual
|
Chassis Size 304.8 mm (12“)
Color Black
Directivity Index 11.6 dB
Input Connections 2 four-pin Speakon
Speaker Type Two-Way
Speaker Type Wedges
Frequency Response (-3 dB) 65 - 16000 Hz
Frequency Response (-10 dB) 50 - 20000 Hz
Internal Crossover No
Sensitivity 1 W/1 m 98 dB
Max. SPL/1m (calc) 129 dB
Coverage
(Nominal -6 dB) H° 55 °
Coverage
(Nominal -6 dB) V° 80 °
Rotatable Horn No
LF Transducer DL12ST
Low Frequency Power Handling (Continuous/Program/Peak) 300 Watts
High Frequency Power Handling (Continuous/Program/Peak) 75 Watts
LF Nominal Impedance 8 Ω
HF Transducer ND6-16
HF Nominal Impedance 16 Ω
Minimum Impedance 8.2/10.5 Ω
Enclosure Material 13-ply birch plywood with Futura
Flying No
Outdoor No
Height 584 mm (22.99“)
Width 449 mm (17.68“)
Depth 313 mm (12.32“)
Weight Net 21.9 kg (48.28 lbs) |
PRICE PER UNIT
ADAMs A7 & A7X: the evolution of a legend The predecessor to the A7X, the A7, became the most famous of all ADAM monitors in a very short time. Not only has it been reviewed over three dozen times with outstanding results, it has also received numerous awards. The A7 quickly gained mass appeal, praised in many of the worldʼs largest internet forums. Still today, the A7 are the reference monitors in many smaller studios. With the A7X, ADAM Audio proudly presents the evolution of a legend. It takes everything that made the A7 such an outstanding speaker to a new level. Driver technology The first aspect that distinguishes the old from the new model is the X-ART tweeter. The ʽXʼ stands for ʽeXtended frequency responseʼ and thus for one of the features of the Accelerating Ribbon Technology that has been drastically improved: the frequency response. It now extends all the way up to 50kHz. In addition, the X-ART tweeter has a higher efficiency and higher maximum sound pressure levels. The perfect integration with the lower frequencies has been achieved with a newly designed 7” midwoofer. It has been redesigned with a much bigger voice coil (1.5”) and is driven by an amplifier with twice the power compared to its predecessor. This combination produces an amazing sound and pressure levels with an almost distortion-free musical reproduction. Amplifiers / controls Each driver has its own dedicated amplifier. A 50W A/B amp is responsible for the X-ART tweeter, while the midwoofer is being driven by a 100W PWM amp. The front panel includes a power switch and a control for the volume that retains the volume setting independently from the on/off switch. On the rear panel are several additional controls: a gain for the high frequencies (± 4dB) and two shelf filters for high and low frequencies.
To ensure greater compatibility, there are both XLR (balanced) and RCA (unbalanced) connectors. | Mid-Woofer |
| | Number | 1 | | Basket Ø | 7" (175 mm) | | Voice coil Ø | 1.5" (38 mm) | | Cone material | Carbon/Rohacell/Glass Fiber | | Tweeter |
| | Number | 1 | | Type | X-ART | | Diaphragm area | 4 inch² (2420 mm²) | | Equiv. Diaphragm Ø | 2" (56 mm) | | Velocity transform ratio | 4:1 | | Diaphragm weight | 0.17 g | | Built-in Amplifiers |
| | Mid-Woofer | 1 | | Type | PWM | | Amp. power RMS / music | 100 W / 150 W | | Tweeter | 1 | | Type | A/B | | Amp. power RMS / music | 50 W / 75 W | | Control panel |
| | Input Sensitivity | -∞ to +14 dB | | High Shelf EQ > 5 kHz | ±6 dB | | Low Shelf EQ | ±6 dB | | Tweeter gain | ±4 dB | | Input connectors |
| | Analog | XLR / RCA | | General data |
| | Frequency response | 42 Hz - 50 kHz | | THD 90dB/1m > 100 Hz | ≤0.5 % | | Long term output | ≥106 dB | | Max. peak | ≥114 dB | | Crossover frequencies | 2500 Hz | | Input impedance | 30 KOhm | | Weight | 20.3 lb (9,2 kg) | | Magnetically shielded | No | | Height x Width x Depth | 13.5" (337 mm) x 8" (201 mm) x 11" (280 mm) | | Warranty | 5 Years |
| Delivery contents | | Power cord, Manual |
|
Description:
Following in the tradition of the original 12MX, the 10MX offers most of the same features but in a more compact enclosure. Due to its unique cabinet geometry, the 10MX is at home either on the stage as an extremely low profile stage monitor, or as a main, medium duty, front of house speaker. Adamson's Acoustic Waveguide is employed in the 10MX and its integral pole mount makes installation fast and effective. As with all Adamson enclosures, frequency response, output and beamwidth control are second to none. The 10MX carries on the tradition of multi-purpose versatility.
Applications:
Extremely Low Profile Stage Monitor
Arrayable Front of House Enclosure
Theater
Houses of worship
Corporate
Features:
Unique Cabinet Geometry
Adamson AX10 Low Frequency Driver
1" High Frequency Compression Driver
Passive Operation
Adamson Acoustic Waveguide
Durable Dual Component Finish
Roadworthy Construction
Weight: 22 | The JBL Control 128W premium in-wall speaker designed for applications where top performance is required. The high performance 8 inch wooer features apolymer-coated aluminum cone with pure butyl rubber surround. The 1" pure titanium dome tweeter is mounted on a low-diffraction swivel-mounting system enabling the user to direct high frequencies where required without the diffraction distortion inherent in other aimable tweeter designs.
JBL Control 128W at a Glance:
- 30 Hz - 20 kHz frequency range.
- 120W continuous program (60W cont. pink, 240W cont. peak).
- 90 dB sensitivity (1W/1m).
- High-slope crossover network produces natural sound and even coverage.
- Optional MTC-128RIF Rough-In-Frame for new construction installation to wallstuds.
|
Reviews
There are no reviews yet.