Content |
The YC-850 Wall mounting bracket is designed to mount the N-8000 Series Interface units to a wall.
Finish | Surface-treated steel plate, black, 30 % gloss | Dimensions | 45.1 (W) × 220 (H) × 10 (D) mm (1.78" × 0.39" × 8.66“) | Weight | 180 g (0.4 lb) | Accessory | Unit mounting screw ……4, Screw for wall mounting (wood screw)…4 | Applicable Model | N-8000RS, N-8000DI, N-8000AF, N-8000CO, N-8000AL,
N-8010RS, N-8400RS |
|
The N-8000CO is a C/O interface unit designed for use with TOA's packet intercom system (IP network-compatible intercom system) that employs the packet audio technology. It has an analog central office line circuit, allowing the intercom station to make and receive calls to and from the telephone line. Connecting the unit to the LAN permits paging calls through analog subscriber line to be made and the equipment connected to the N-8000MI and N-8000DI to be controlled. It can be mounted in an EIA equipment rack (1U size) with the use of an optional rack mounting bracket or installed on a wall using an optional wall mounting bracket.
Power Source | 220 - 240 V AC, 50/60 Hz | Power Consumption | 7 W (max.) | Line | Public Switched telephone networks
Number of lines: 1 line
Selective signal type: DTMF signal
Signal system: Compatible with loop start signaling
Wiring method: 1 pair of twisted pair cables | Network Section | Network I/F: 10BASE-T/100BASE-TX (Automatic-Negotiation)
Auto MDI/MDI-X compatible
Network protocol: TCP/IP, UDP, HTTP, RTP, ARP, ICMP, IGMP
Audio packet transmission system: Unicast (simultaneous paging to up to 8 zones)
Multicast (simultaneous paging to up to 191 zones)
Connector: RJ45 connector | Indication | Network LNK/ACT indication, Status lamp, Power-on indication lamp,
Line in-use lamp | Other | Firmware update function, System data hold function, Time of day hold facility,
Reset switch (front panel) | Setting Method | Rack, Desk, Surface mount | Operating Temperature | 0 ℃ to +40 ℃ (32 ゜F to 104 ゜F) | Operating Humidity | 90 %RH or less (no condensation) | Finish | Pre-coated steel plate, black, 30 % gloss | Dimensions | 210 (W) × 44.3 (H) × 267 (D) mm (8.27" × 1.74" × 10.51“) | Weight | 1.7 kg (3.75 lb) | Accessory | Power cord (2 m (6.56 ft))…1, CD (for PC setting, maintenance use)…1,
Mini-clamp plug (2 pins)…2, Plastic foot…4, Screw for fitting plastic foot…4 | Option | Rack mounting bracket: MB-15B-BK (for rack mounting one N-8000CO unit)
MB-15B-J (for rack mounting two N-8000CO units)
Wall mounting bracket: YC-850 |
|
This Master Station is designed to connect to the IP Intercom Exchange, and provides hands-free or handset conversation of high sound quality. In addition to the functions of the standard Master Station, the Multifunctional Master Station provides LCD display, Auto-dialer function enabling one-touch dialing, headset terminal and external speaker terminal. This station can be mounted to the wall using an optional YC-280 wall mounting bracket.
* 0 dB = 1 V Power Source | 48 V DC (supplied from the IP intercom exchange (option)) | Power Consumption | 1.8 W (at rated), 2.4 W (max.) | Wiring Method | Non-polar one pair stranded wire system | Transmission System | 2 wire 160 kbps echo canceller transmission system | Signal Level | Under 0 dB* | Speech Method | Hands-free or handset conversation | Audio Frequency Range | 300 - 7,000 Hz | Transmission Range | Max. 1500 m (φ0.65 mm, Loop resistance 170 Ω) | Hands-free | Speaker: 5.7 cm cone-type, 0.6 W, 8 Ω
Microphone: Omni-directional electret condenser microphone | Handset | Receive path: Cone-type
Send path: Electret condenser microphone | Display | Alphanumeric characters (16 characters × 2 lines LCD) | Line Connecting Terminal | RJ11 modular jack | Headset Terminal | Speaker: 3 mW, 32 Ω, Microphone: -49 dB*, φ3.5 mm mini Jack | External Speaker Terminal | 0.6 W, 8 Ω, screwless connector (2 pins) | Installation Method | Desk/Surface mounted master station
(When mounting to the wall, use the optional YC-280.) | Operating Temperature | 0℃ to +40℃ | Operating Humidity | Under 90% RH (no condensation) | Finish | Body, Handset: ABS resin, gray | Dimensions | 148 (W) x 208 (H) x 70.5 (D) mm (excluding a curl cord section) | Weight | 800 g | Accessory | Connection cord (3 m)…1 | Option | Wall mounting bracket: YC-280 |
| Baofeng UV-82 Wireless Professional Transceiver Dual Band Vhf-Uhf
The Baofeng is one of the leading high quality 2 frequency VHF-UHF transceiver with a power of 8 watts, it is suitable for various sports, hotels, construction sites and all uses that we need to have long distance communication.
The Baofeng UV-82 has a large illuminated display with dual frequency indication,also has an FM radio receiver but also a Led flashlight.The battery is Lion (Lithium) high capacity 2800mAH and charges with the automatic desktop quick charger that is inside the package.
The Baofeng UV-82 is also programmable by computer using a special cable (sold separately) and comes with a belt clip, hand strap, Greek instructions and microphone.
Its use requires a radio amateur license.
Baofeng can be used:
- Construction sites (Construction, Shipyards, Mining etc.)
- Security Services (Fire Brigade, Police, Security, Airports, etc.)
- Police, Security, Security, Airport, Security, Airport Security, Security, Security, Security, Security, Fire, Security, Security, Fire Brigade, Security, Security, etc.)
- Voluntary groups (Firefighting, Rescue, Care, etc.)
- Transport (Taxi, Trucks, Convoys, Trains, Buses, etc.)
- Sports (Cycling, Running, Track and Field, etc.)
- Aerobatics (Parachuting, Parapente, Paragliding, Skydiving etc.)
- Outdoor activity (Hunting, Fishing, Camping, Hiking, Mountaineering, Trail Running, Skiing, etc.)
- Tourism (Guiding, Hotels, etc.)
- On Boat (Sailing, Fishing, Fishing, Water Sports etc.)
- On the Bike (Driver/Passenger Intercom, Driving Schools, etc.)
- In the Car (Speed Racing, Vehicle Convoy, etc.)
|
The N-8000AL is a Telephone interface unit designed for use with TOA's packet intercom system (IP network-compatible intercom system) that employs the packet audio technology. It has a single telephone line interface, allowing an analog telephone to be connected. Connecting the unit to the LAN permits the analog telephone to be operated in the same manner as the intercom master station. It can be mounted in an EIA equipment rack (1U size) with the use of an optional rack mounting bracket or installed on a wall using an optional wall mounting bracket.
Power Source | 220 - 240 V AC, 50/60 Hz | Power Consumption | 8 W (max.) | Line | Number of lines: 1 line
Selective signal type: DTMF signal
Monitoring function: Line Loop detection
Control function: Caller ID function
Wiring method: 1 pair of twisted pair cables | Network Section | Network I/F: 10BASE-T/100BASE-TX (Automatic-Negotiation)
Auto MDI/MDI-X compatible
Network protocol: TCP/IP, UDP, HTTP, RTP, ARP, ICMP, IGMP
Audio packet transmission system: Unicast (simultaneous paging to up to 8 zones)
Multicast (simultaneous paging to up to 191 zones)
Connector: RJ45 connector | Indication | Network LNK/ACT indication, Status lamp, Power-on indication lamp,
Line connection indication lamp | Other | Firmware update function, System data hold function, Time of day hold facility,
Reset switch (front panel) | Setting Method | Rack, Desk, Surface mount | Operating Temperature | 0 ℃ to +40 ℃ (32 ゜F to 104 ゜F) | Operating Humidity | 90 %RH or less (no condensation) | Finish | Pre-coated steel plate, black, 30 % gloss | Dimensions | 210 (W) × 44.3 (H) × 267 (D) mm (8.27" × 1.74" × 10.51“) | Weight | 1.7 kg (3.75 lb) | Accessory | Power cord (2 m (6.56 ft))…1, CD (for PC setting, maintenance use)…1,
Mini-clamp plug (2 pins)…2, Plastic foot…4, Screw for fitting plastic foot…4 | Option | Rack mounting bracket: MB-15B-BK (for rack mounting one N-8000AL unit)
MB-15B-J (for rack mounting two N-8000AL units)
Wall mounting bracket: YC-850 |
| BAOFENG UV-5RA Portable Two-Way Radio 136-174/400-480 MHz Dual-Band Transceiver (Black)
Features:
1) Output : 4W/1W
2) FrequencyRange: 136.00-174.00 MHz & 400.00-480.00MHz
3) Frequency Step Setting
4) High &Low Power Switchover
5) Battery Saving
6) VOX Function
7) Wide/Narrow Band Selection
8) Auto-Back Light
9) Dual Band Standby
10) Time-out Timer (TOT)
11) 50 CTCSS and 104 DCS Codes
12) Voice Prompt
13) ANI Code
14) PC or Manual Program
15) DTMF Code
16) PTT-ID
17) AUTO Keypad Lock
18) Busy Channel Lock Function
19) Dual Band, Dual Display and Dual Standby
20) Emergency Alarm
21) Priory Scanning Function
22) Relay Forwarding Confirmed (1750 HZ)
23) Low Battery Warning
24) U/V Cross Band Dual Watch
25) Dimension: 110x58x32mm
26) Packing Details: 40 Units/CTN, Carton Size: 47.5x42x50 cm N.W: 21.5 KGS, G.W:22.5KGS
Specifications |
Frequency Range: |
136.00-174.00 MHz |
400.00- 480.00MHz |
Storage Channel |
128 |
Step Frequency |
2.5/5/6.25/10/12.5/20/25KHz |
Rated voltage |
DC 7.4V |
Frequency Stability |
±2.5ppm |
Work Temperature |
-20 ℃ to +60℃ |
BatteryCapacity |
H-1800m Ah (Li-ion Battery) |
BatteryLife |
About 12 Hours |
Frequency Combination |
PLL frequency synthesis |
Antenna Impedance |
50 Ω |
Wok Mode |
Same Frequency simplex Operation or Different Frequency simplex Operation |
Dimension |
110x58x32 mm (Excluded Antenna) |
Transmitter |
Output Power |
4W/1W |
Modulation Mode(W/N Band) |
FM (F3E) |
Maximum Frequency Deviation (W/N Band) |
≤5 KHz |
Spurious Power |
≤7.5 µW |
Adjacent channel power |
≤-65dB/≤-60dB |
Audio Distortion |
<5 % |
SNR |
≥-45dB/≥-40dB |
CTSCC/DCS Frequency Deviation(W/N Band) |
0.7±0.1KHz (W), 0.4±0.1KHz (N) |
Modulation Sensitivity |
8-12mV |
Transmitting Current |
≤1500mA |
Receiver |
Sensitivity |
<0.20 µ V (12dB SINAD) |
Audio Power |
1 W |
Inter modulation Interference Resistance |
≥65dB (W), ≥55dB (N) |
Adjacent channel Sensitivity (W/N Band) |
≥65dB (W), ≥55dB (N) |
Audio Distortion |
5 % |
Receiving Current |
≤ 380m A |
Note:
■ Specifications are subject to change for technology improvement without notice
Package contents:
1 x radio
1 x desktop charger
1 x dual band antenna
1 x handstrap
1 x belt clip
1 x battery 1800mAh
1 x user guide |
Reviews
There are no reviews yet.