| Content |
The YC-850 Wall mounting bracket is designed to mount the N-8000 Series Interface units to a wall.
| Finish | Surface-treated steel plate, black, 30 % gloss | | Dimensions | 45.1 (W) × 220 (H) × 10 (D) mm (1.78" × 0.39" × 8.66“) | | Weight | 180 g (0.4 lb) | | Accessory | Unit mounting screw ……4, Screw for wall mounting (wood screw)…4 | | Applicable Model | N-8000RS, N-8000DI, N-8000AF, N-8000CO, N-8000AL,
N-8010RS, N-8400RS |
| Baofeng UV-5R features include CTCSS and DCS sub-tone encoding and decoding, DTMF tone sending, VOX, multiple tuning pitch options from 2.5 to 25KHz, 128 memories, Narrow and Wide FM modulation selection, low and high power selection, full numeric keypad, adjustable frequency shift for access to repeaters, scan functions, voice guidance and much more.
BaoFeng UV-5R Radio Background
BaoFeng Introduced the UV-5R Dual Band, Dual Display radio in 2012. Since its introduction the UV-5R has seen a massive success. The UV-5R has seen 2 major changes since its launch with the second generation being signified by BFB297 Firmware (2nd Gen.) in early 2013 and the N5R firmware tweak in August of 2014.
There are several cosmetic variants of the UV-5R. These variants have no differences from the UV-5R besides their cosmetic design along with the possible removal of the ‘Band Key’ (no longer required in Gen. 2).
Variations include the: UV-5R v2+, UV-5RA, UV-5RE, UV-5R+ (Plus), along with several other lesser produced variants. Some of these variations may also no longer work with case specific accessories such as the original UV-5R batteries.
Late in 2013, the UV-5R also included a new variant generation with the inverted (privacy) display series; with the introduction of the BF-F8+ and its own cosmetic variants (such as the GT-3 and 997-S).
Finally, in the fall of 2014, the UV-5R saw the introduction to its successor the 3rd. Generation BF-F8HP.
Features – Original 2012 Product Launch (1st Gen.)
High / Low Power Settings (4W/1W) Programmable Amateur Radio
Frequency Range: 65-108 MHz (Only commercial FM radio reception) VHF: 136-174 MHz(Rx/Tx). UHF: 400-520 MHz(Rx/Tx)
Customize Channel Names, the Boot Display and More by Using the PC03 FTDI Programming Cable
1500mAh Battery (1800mAh Label); Broadband (Wide) 25khz / Narrowband (Narrow) 12.5khz Selectable
AUTO Keypad Lock, Dual Band, Dual Display and Dual Standby
The BaoFeng UV-5R is a compact hand held transceiver providing 4 watts in the frequency range of 136-174 MHz and 400-480MHz (520MHz later versions). It is a compact, economical HT that includes a special VHF receive band from 65 – 108 MHz which includes the regular FM broadcast band. Dual watch and dual reception is supported. You get up to 128 memories. Other features include: selectable wide/narrow, battery save function, VOX, DCS/CTCSS encode, key lock and built in flashlight. Selectable frequency steps include: 2.5, 5, 6.25, 10, 12.5 and 25 kHz. RF power may be selected at 4 or 1 watts. This radio comes with an SMA-Female antenna, flexible antenna, BL-5 Li-ion battery (7.4V 1500 mAh (1800mAh label)), belt clip, wrist strap, AC adapter (8.4V 600ma) and drop-in charging tray. This radio requires the PC03 FTDI programming cable.
Features – Updated Late 2013 ProducT Launch (2ND Gen.)
Radio Frequency IC:
- Upgraded SQ to enhance the anti-interference ability
- RDA1846S adds an new tail tone elimination function, when transmitting and receiving signal between 50Hz with 55Hz
- Improves the receiver AGV switching noise when signal strength changes severe
Frequency-Modulated Receiver Chip:
- The RDA5802N has a powerful low-IF digital audio processor, which makes it have the most optimum sound quality with varying reception conditions
Power Amplifier IC :
- Low crossover distortion
- Low quiescent circuit current
N5R Firmware (August 2014)
- Hold ‘0’ – Display Voltage
- Removes Cloning Capabilities (Due to Several Firmware Edits)
VERSATILE RADIO FOR AMATEUR USE
The BaoFeng UV-5R is legal for use on amateur frequencies. The UV-5R is able to Transmit on Narrowband (12.5kHz) and Wideband (25kHz).
Dual Watch Receiver
The BaoFeng UV-5R has one built-in receiver but can “watch” two channels (semi duplex). Monitor two different frequencies (even on different bands (VHF/UHF)) and the radio will monitor both frequencies giving priority to the first station to receive an incoming call.
FM Broadcast Station
You can listen to the FM Broadcast radio, while still monitoring your radio frequencies in the background. Any incoming call will be given priority insuring you never miss an important call while listening to the radio.
Group Tones supported
The BaoFeng UV-5R supports the most common Analog Tones. It supports CTCSS, DCS, and DTMF calling methods. Set-up your calling methods to call by group tones. Tone calling (private line) is required by most repeater applications and the UV-5R supports the latest standards
The BaoFeng UV-5R can even send DTMF tones. This allows for sending ANI (Caller ID) or remote commands that require DTMF tones
Alias Models – Cosmetically Different only
UV-5R5
UV-5Rv2+
UV-5RA
UV-5RE
UV-5R+ (Plus)
Customize Your Operation with channels, Programmable Buttons, and more!
You can program your BaoFeng UV-5R exactly how you want it. There are 128 programmable memory channels. You can add or remove channels from scanning list using the free computer software. You can give channels alphanumeric names, using a computer. The radio has 2 power levels (5 watt maximum), allowing you to choose how far you can communicate. You can set VFO limits using the CHIRP software. You can easily program from a PC to set-up the radio to operate exactly as needed.
What’s In the Box?
BaoFeng UV-5R
1500mAh Battery
Antenna
Power Adapter
Earpiece
Belt Clip
Hand Strap
Battery Charger
User Manual
Features
25KHz/12.5KHz Switchable (Wide/Narrow Band)
FM Radio (65.0MHz-108.0MHz)
Large Inverted LCD Display
LED Flashlight
High /Low RF Power Switchable
VOX
50 CTCSS/ 104 DCS Tones
Tone searching/scanning
Dual standby
PC programmable
Transmitter time-out timer(TOT)
Busy channel lock-out(BCLO)
UV-5R SPECIFICATIONS
Frequency range:
[TX] 136 – 174MHz, 400 – 520MHz
[RX] 136 – 174MHz, 400 – 520MHz, 68-108MHz (FM Broadcast)
Channel Capacity:
128 Channels
Channel Spacing
25KHz (wide band)12.5KHz (narrow band)
Sensitivity
=0.25µV (wide band) =0.35µV (narrow band)
Operation Voltage
7.4V DC ±20%
Battery:
1500mAh
Frequency step:
2.5, 5, 6.25, 10, 12.5, 20, 25, 30 and 50KHz
Antenna:
Antenna Connector: SMA-Female / Antenna Impedance: 50O
Accessory Connector:
Kenwood 2 Pin Standard
Stability:
±2.5ppm
Output power:
5W / 1W
Audio Power Output
700mW/10% |
The N-8000DI is a Direct select unit designed for use with TOA's packet intercom system (IP network-compatible intercom system) that employs the packet audio technology. It is equipped with each 32 contact inputs and outputs, and the indicators on the front panel indicate the output statuses. Connecting the unit to the LAN permits the calling station display, external equipment control, and direct selection function to be realized. It can be mounted in an EIA equipment rack (1U size) with the use of an accessory rack mounting bracket or installed on a wall using an optional wall mounting bracket.
| Power Source | 220 - 240 V AC, 50/60 Hz | | Power Consumption | 16 W (max.) | | Contact Input | 32 inputs, no-voltage make contact input, open voltage: 24 V DC,
short-circuit current: 5 mA or less, removable terminal block (20 pins)
(1 common terminal for 4 inputs) | | Contact Output | 32 outputs, relay contact output, contact capacity: 24 V DC/2 - 500 mA,
removable terminal block (32 pins) | | Network Section | Network I/F: 10BASE-T/100BASE-TX (Automatic-Negotiation)
Auto MDI/MDI-X compatible
Network protocol: TCP/IP, UDP, HTTP, RTP, ARP, ICMP, IGMP
Connector: RJ45 connector | | Indication | Network LNK/ACT indication, Status lamp, Power-on indication lamp,
Channel indication lamps (32 channels) | | Other | Firmware update function, System data hold function, Time of day hold facility,
Reset switch (front panel) | | Setting Method | Rack, Desk, Surface mount | | Operating Temperature | 0 ℃ to +40 ℃ (32 ゜F to 104 ゜F) | | Operating Humidity | 90 %RH or less (no condensation) | | Finish | Pre-coated steel plate, black, 30 % gloss | | Dimensions | 420 (W) × 44.3 (H) × 267 (D) mm (16.54" × 1.74" × 10.51“) | | Weight | 2.8 kg (6.17 lb) | | Accessory | Power cord (2 m (6.56 ft))…1, CD (for PC setting, maintenance use)…1,
Removable terminal plug (10 pins)…4, Removable terminal plug (16 pins)…4,
Plastic foot…4, Screw for fitting plastic foot…4, Rack mounting bracket…2,
Screw for mounting bracket…8, Screw for rack mounting…4 | | Option | Wall mounting bracket: YC-850 |
|
The YC-280 is a wall-mounting bracket specially designed for the master station of the N-8000 series Packet Intercom system. The master station can be installed on a wall or its front operation panel can be inclined from the desk surface by attaching the YC-280.
| Finish | Surface-treated steel plate, gray, paint | | Dimensions | 100 (W) × 140 (H) × 31.8 (D) mm | | Weight | 120 g | | Accessory | Screw for wall mounting (wood screw) …2, Rubber foot …4 | | Applicable Model | N-8000MS, N-8010MS, N-8020MS, N-8500MS, N-8510MS |
|
Features:
1) IP67 waterproof and dustproof (Not diving)
2) Relay Forwarding Confirmed (1750 HZ)
3) Tri-Band, Dual Display and Dual Standby
4) High & Low Power Switchover
5) Battery Saving
6) VOX Function
7) Wide/Narrow Band Selection
8) Auto-Back Light
9) Dual Band Standby
10) Time-out Timer (TOT)
11) 50 CTCSS and 104 DCS Codes
12) Voice Prompt
13) ANI Code
14) PC or Manual Program
15) DTMF Code
16) PTT-ID
17) ATUO Keypad Lock
18) Busy Channel Lock Function
19) Low Battery Warning
20) Emergency Alarm
21) Priory Scanning Function
22) U/V Cross Band Dual Watch
Functions:
●Tri-band handheld transceiver, with display function menu on the display ‘LCD’.Working Frequency:136-174MHz/400-480MHz
●High/mid/low power selectable(5 W/3 W /1 W)
●Up to 128 memory channels.
●Cross band reception/transmission
●A variety of display channel number, frequency, channel frequency, channel name, etc.
●CTCSS&DCS
●Tone end of transmission
●Function ‘VOX'(voice operated transmission).
●DTMF emergency alarm
●ANI code
●Selectable Frequency Step 2.5/5/6.25/10/12.5/20/25/50 kHz
●Frequency reverse
●Battery saving function ‘SAVE’.
●Emergency SOS sound and light alarm
●Programmable by PC.
●Broadband (Wide 25KHz)/ Narrowband(Narrow 12.5KHz), selectable..
●Commercial FM radio receiver(65 MHz~ 108 MHz).
●Display illumination and programmable keyboard.
●Built-in LED flashlight
■ Specifications are subject to change for technology improvement without notice
Package contents:
1 x radio
1 x desktop charger
1 x dual band antenna
1 x handstrap
1 x belt clip
1 x battery 4800mAh
1 x user guide |
The N-8000RS is a Sub-station interface unit designed for use with TOA's packet intercom system (IP network-compatible intercom system) that employs the packet audio technology. Up to 16 sub-stations can be connected using 2-core shielded cables. The number of LAN-connected N-8000 system components such as the N-8000RS and IP intercom exchanges is 192 maximum in total. Connecting the unit to the LAN permits the sub-station to receive paging calls and make calls to both the master station connected to the IP intercom exchange and the IP master station. It can be mounted in an EIA equipment rack (1U size) with the use of an accessory rack mounting bracket or installed on a wall using an optional wall mounting bracket.
| Power Source | 220 - 240 V AC, 50/60 Hz | | Power Consumption | 40 W (at rated), 50 W (max.) | | Interface Section for Sub-station | Number of lines: 16 lines
Number of speech link: 2 links
Transmission system: Analog baseband
Transmission range: 500 m (546.81 yd)/φ0.5 mm (AWG24), 800 m (874.89 yd)/
Speech method: Half-duplex conversation by way of voice switch,
Connector: Removable terminal block (3 pins)
Wiring method: Two-core shielded cable
Audio output: Conversation: Max. 1 W, Paging: Max. 0.5 W/line
Feeding voltage/current: 22 V DC, 30 mA max.
Control signal: Call in button detection, privacy button detection, hook detection | | Network Section | Network I/F: 10BASE-T/100BASE-TX (Automatic-Negotiation)
Auto MDI/MDI-X compatible
Network protocol: TCP/IP, UDP, HTTP, RTP, ARP, ICMP, IGMP
Audio packet transmission system: Unicast (Speech: 2 links, Paging: Max. 8 zones)
Connector: RJ45 connector
Voice sampling frequency: 16 kHz, 8 kHz (controllable on the software)
Quantifying bit number: 16-bit
Voice encoding method: Sub-band ADPCM, Cryptosystem
Voice packet loss recovery: Silence insertion
Audio delay time: 80 ms, 320 ms (controllable on the software) | | Indication | Network LNK/ACT indication, Status lamp, Power-on indication lamp | | Other | Firmware update function, System data hold function, Reset switch (front panel) | | Setting Method | Rack, Desk, Surface mount | | Operating Temperature | 0 ℃ to +40 ℃ (32 ゜F to 104 ゜F) | | Operating Humidity | 90 %RH or less (no condensation) | | Finish | Pre-coated steel plate, black, 30 % gloss | | Dimensions | 420 (W) × 44.3 (H) × 325.5 (D) mm (16.54" × 1.74" × 12.81“) | | Weight | 3.9 kg (8.6 lb) | | Accessory | Power cord (2 m (6.56 ft))…1, CD (for PC setting, maintenance use)…1,
Removable terminal plug (3 pins)…16, Plastic foot…4, Screw for fitting plastic foot…4,
Rack mounting bracket…2, Screw for mounting bracket…8, Screw for rack mounting…4 | | Option | Wall mounting bracket: YC-850 |
|
Reviews
There are no reviews yet.