WHARFEDALE SW-12 Black Subwoofer

• Drive Units: 1 x (12“) 300mm cone long-throw
• Frequency Response: 35 - 120Hz ±3dB
• Amplifier Power Output: 300W
• Peak Power Output: 450W
• Line Input Sensitivity: 200mv for maximum output
• Crossover Range: 30 - 150Hz
• Inputs: Stereo Line In (2 x RCA Phono)
• Mono (LFE) Line In: (RCA Phono)
• Input Impedance: Line Input 10kΩ

Amplifier Output: 1000 watts (RMS) 2000 watts (Peak)
Frequency Response: 16Hz to 40/160Hz variable
Crossover (Low Pass): 40Hz - 160Hz Variable slope characteristic from
12 - 36dB/Octave
Sub-Sonic Filter (High Pass): 16Hz - 31Hz
EQ: 4 x Presets 1 x User Setting
Equalisation: Graphic 9 band Equaliser ±6dB in 0.5dB steps
Volume Level: -80 - 0dB (1dB increments from 0 to -30dB & 2dB
increments from -31 to -80dB)
Auto Sensing Input Requirements: Line Level>5mV (RMS) Variable delay time
5, 10, 15, 20, 25 & 30 minutes
Variable Phase Control: 0. 45. 90, 135, 180, 225, 270 & 315º
Internal Memory: 3 Independent memory locations
Cabinet Specification:
Sealed Cabinet with 25mm thick M.D.F
construction with critical internal bracing
Amplifier Classification:
Class-D amplifier with DSP control
Driver Complement:
1 x 15" C-CAM long throw sub-woofer driver featuring triple suspension and a 4" long throw voice coil

External Dimensions -
Excluding Plinth: Width: 485mm (19 inches)
Height: 455mm (18 inches)
Depth: 475mm (18 3/4 inches)
Weight: 50 Kg (110lbs)
Mains input Voltage: 100 - 240 Vac 50/60Hz (Factory Set)
Trigger Input:
3.5mm Jack input, +12Vdc = On State

User's Manual

AVAILABLE IN THESE COLOR FINISHES

System Format: Sealed Cabinet. 25mm M.D.F construction with internal bracing. Sealed amplifier compartment
Low Frequency Limit: 18 Hz
Upper Frequency Limit: 40 - 120 Hz Variable
Low Pass Filter Alignment: Active 4th order 24dB/octave (6/12/18/24 dB user adjustable)
Amplifier Power Output 650 watts Continuous. 1200 watts (peak)
Amplifier Classification D2AudioTM* DSP controlled, Class-D amplifier system. High current switch mode power supply (smpsu)
Equalisation 4 Settings (Off/Music/Movie/Impact)
Phase Control 0-90-180-270 degrees
Auto Sensing Input Level Requirements Line Level > 2mV. Standby after 10 minutes if no signal sensed
Digital Volume Level -60 to +10dB in 1dB increments
Drive Unit Complement 1 x 15” C-CAM® sub-woofer driver featuring triple suspension
3” long throw voice coil
12V Trigger Input 3.5mm mono jack socket
Connections Stereo RCA in/out
LFE in/out
12V Trigger in (3.5mm mono jack)
LEO* - 3.5mm Microphone input jack (microphone supplied)
Input Impedance 20 kohms
Dimensions (H x W x D) 430 x 400 x 400 mm (16 15/16 x 15 3/4 x 15 3/4 Inches)
Grille Depth 28 mm (1 1/8 Inches)
Weight (unpacked) 35.3 kg (77.6 lbs)
Mains Input Voltage 100 - 120 Vac / 220 - 240 Vac 50/60 Hz (Factory preset)
Electrical Certifications CE/CB/ETL/Fcc/ErP (Energy saving compliant)
Power Consumption Maximum 1000W. Standby Fuse Type 20mm UL/VDE (Value is region specific)
IR Remote Control Code NEC SH6122

AVAILABLE IN SIX COLOR FINISHES

Type     Advanced YST II and QD-Bass Subwoofer
Driver     25cm(10'') cone
Dynamic Power     250 W
Frequency Response     20-160 Hz
Advanced YST     Advanced YST II
QD-Bass Technology     Front-firing
High-Efficiency Power Amplifier     Yes
Linear Port     Yes
BASS (Bass Action Selector System)     Yes
Standby Power Consumption     0.3 W
Dimensions (W x H x D)     380 x 368 x 420 mm
Weight     18.5 kg

Crossover Tuning    
Mushrooms    
Description     Active closed-box subwoofer system
Drive unit     ø250mm (10 in) paper/Kevlar® cone long-throw
Frequency range     -6dB at 18Hz and 25/140Hz adjustable (EQ at A)
Frequency response     ±3dB 25Hz – 40/140Hz adjustable (EQ at A)
Bass Extension     -6dB at 18Hz (position A)

-6dB at 23Hz (position B)

-6dB at 28Hz (position C)
Amplifier     Power output: 500W
Rated power consumption:     98W / 1W standby
Input impedance:     33kΩ
Signal / noise:     >90dB
Functions:     Input level (line in)

Input level (speaker in)

Low-pass filter frequency (line in only)

Low-pass filter bypass

Bass extension

Bass roll-off alignment

Auto sense on/standby

Phase switch
Inputs:     Line In (RCA Phono)

Speaker in (Binding post)

12v trigger (3.5mm jack)

Low-pass filter

Active 4th-order, variable cut-off frequency
Dimensions     Height: 325mm (12.8 in) not including feet

Width: 325mm (12.8 in)

Depth: 375mm (14.8 in) including grille and controls
Net weight     15.5kg (34.4 lb)
Finishes     Matte Black

Outer Flange Dimensions | (Metric) :15-1/2” W x 21” H | 39.4 x 53.3 cm
Cut Out Dimensions | (Metric) :14-3/8” W x 19-7/8” H | 36.5 x.50.5 cm
Depth from Flange | Metric :3-13/16” | 9.7 cm
Driver Complement :One 10" Long-Excursion Woofer coupled to one 10" infrasonic Radiator
Frequency Response :16 Hz – 200 Hz
Impedance :4 ohms
Required Amplifier :SubAmp 600 (available separately)
Inputs :One pair of gold plated spring loaded posts
Enclosure :Sealed Medite
Available Finishes :Paintable White
Accessories :Paint mask; Cut-out template; Paintable removable all metal grill
Packaging :One to a carton
Weight | (Metric) :30 lbs | 13.6 kg