Content |
2-way centre speaker
General Description |
2-way centre speaker |
Enclosure Type |
bass reflex |
Transducer Complement |
2-way |
Bass Driver |
5“(130mm) Black woven Kevlar cone x 2 |
Full Range Driver |
1“(25mm) soft dome |
Sensitivity (2.83v @ 1m) |
89dB |
Peak Power Handling |
25-120W |
Peak SPL |
95dB |
Nominal Impedance |
4Ω (compatible 8Ω ) |
Minimum Impedance |
3.8Ω |
Frequency Response (+/-3dB) |
65Hz ~ 20kHz |
Bass Extension (-6dB) |
55Hz |
Crossover Frequency |
2.5kHz |
Dimensions ( H x W x D ) |
(180+10) x 510 x (200+32)mm |
Net Weight |
8.0kg/pcs |
|
Frequency Response: 45Hz- 100kHz Sensitivity (1W@1M): 89 dB Nominal Impedance: 4 Ohms Maximum S.P.L (Per pair in room): 112.8 dBA Power Handling (RMS): 200 W Recommended Amplifier Requirements (RMS): 60 - 200 W Bass Alignment: Rear Ported HiVe II Technology Mid / H.F Crossover Frequency: 1800 Hz Bass Low Pass Crossover Frequency: 250 Hz Drive Unit Complement: 2 x 6 1/2" RDT bass/mid-range driver 1 x C-CAM high frequency ribbon transducer External Dimensions - Excluding Stand: Width: 583mm (22 15/16 inches) Height: 225mm (8 7/8 inches) Depth: 291.2mm (11 7/16 inches) Stand Dimensions: Width: 610mm (24 inches) Height: 335mm (13 13/16 inches) Depth 463mm (18 1/4 inches) Weight: 19 Kg (41.8lbs) User's Manual AVAILABLE IN THESE COLOR FINISHES
|
Dimensions | Metric :17" W x 6-1/2" D x 6-1/2" H | 43.2 x 16.5 x 16.5 cm
Frequency Response :42 Hz – 30 kHz
Driver Complement :One 1" pure aluminum dome tweeter; Two 5-1/4" BDSS upper bass/midrange drivers; Two 5-1/4" pressure coupled bass radiators
Impedance :Compatible with 8 Ohms outputs
Sensitivity :91 dB
Recommended Associated Amplifier Power :10 – 250 watts
A/V Receiver Crossover Setting :60 Hz
Inputs :One pair of 5 way binding posts
Available Finishes :Gloss Black only
Accessories :Leveler Foot; Two ¼ 20 insert cover plugs
Mounting Options :Horizontal: On Shelf with included leveling foot; Equipped with two ¼ 20 sized threads to accommodate on wall mounting brackets (available separately)
Packaging :One to a carton
Weight | Metric :10 lbs | 4.5 kg
Warranty :5 Years
|
Enclosure Sealed/Ported
Tweeter Ring Radiator
Midrange size (inches) 3-1/4
Woofer size (inches) 6-1/2
Connector Type Post
Power Range 20-250
Sensitivity 88 dB
Impedance (Ohms) 8
Frequency Response 50-30k Hz
Height (inches) 9-1/16
Width (inches) 28-11/16
Depth (inches) 14
Weight 42.3 lbs
Parts Warranty 5 Years
Labor Warranty 5 Years
ALSO AVAILABLE IN "EBONY" COLOR
|
Driver Complements
Mid/Woofer 2 - 3 1/4" Diameter (8.26cm)
Dynamic Balance aerated polypropylene cone with Extended Linear Motion voice coil driver
Midrange
Tweeter 1 - 3/4" Diameter (1.91cm)
Dynamic Balance ring radiator tweeter
Electrical
Overall Frequency Response 90Hz-31kHz
Lower -3dB Limit 115Hz
Upper -3dB Limit 28kHz
Nominal Impedance 8 ohms
Recommended Amplifier Power 10-125 w/channel
Efficiency 90 dB
Inputs Gold-plated 5-way binding posts
Dimensions
Cabinet Size 4 5/16" H x 16 11/16" W x 3 15/16" D
(10.95cm H x 42.39cm W x 10.00cm D)
Mounting Options keyhole slot; one .25 x 20 threaded insert
Enclosure Type Steel-plate reinforced curved enclsoure with time-aligned driver geometry and PowerPort bass venting
Shipping/Other
Product Weight 4.70 lbs. (2.13kgs)
Shipping unit: each
Total Shipping Weight 5.50 lbs. (2.49kgs)
Speaker Warranty 5 years parts and labor (original purchaser)
|
System Format: 2 Way
Frequency Response: 55 Hz - 60 kHz
Sensitivity (1W@1M): 89 dB
Nominal Impedance: 8 ohms
Maximum S.P.L
(Per pair in room): 111.5 dBA
Power Handling (RMS): 150 W
Recommended Amplifier Requirements (RMS): 100 - 150 W
Bass Alignment: Sealed Cabinet
Crossover Frequency: 2.8 kHz
Drive Unit Compliment: 2 x 5.5" RST bass/mid-range driver
1 x C-CAM H.F ribbon transducer
External Dimensions excl Stand (H x W x D)
172 x 461 x 303 mm
(6 11/16 x 18 1/8 x 11 15/16 inch)
Weight (each) Excluding stands: 6 Kg (13.25 lbs)
AVAILABLE IN SIX COLOR FINISHES
|
Reviews
There are no reviews yet.