Content | 2-way bookshelf speaker
General Description |
2-way bookshelf speaker |
Enclosure Type |
bass reflex |
Transducer Complement |
2-way |
Bass Driver |
5“(130mm)
Black woven Kevlar cone |
Full Range Driver |
1“(25mm) soft dome |
Sensitivity (2.83v @ 1m) |
87dB |
Peak Power Handling |
25-100W |
Peak SPL |
95dB |
Nominal Impedance |
4Ω (compatible 8Ω ) |
Minimum Impedance |
3.8Ω |
Frequency Response (+/-3dB) |
56Hz ~ 20kHz |
Bass Extension (-6dB) |
50Hz |
Crossover Frequency |
2.4kHz |
Dimensions ( H x W x D ) |
(310+10) x 180 x (250+28)mm |
Net Weight |
6.0kg/pcs |
|
- Time Lens Technology-The acoustic centers of the tweeter and mid-bass driver are located in the same plane for superior imaging
- PowerPort® a patented Polk technology, extends the low frequency mid-bass driver response as it decreases air turbulence, and eliminates "port noise" and bass output losses up to 3 dB.
- 3/4" Silk Dome Tweeters for crisp, clear imaging and smooth response that's never tiring.
- 3 1/4" Composite Injection Molded Cones With Dynamic Balance Driver Technology
- Combination Keyhole Slot & 1/4" x 20 Threaded Insert fits all aftermarket ceiling and wall brackets for ultimate flexibility
- Time Lens Technology-The acoustic centers of the tweeter and mid-bass driver are located in the same plane for superior imaging
- PowerPort a patented Polk technology, extends the low frequency mid-bass driver response as it decreases air turbulence, eliminates "port noise" and bass output losses up to 3 dB.
- 3/4" Silk Dome Tweeters for crisp, clear imaging and smooth response that's never tiring.
- 3 1/4" Composite Injection Molded Cones With Dynamic Balance Driver Technology
- Combination Keyhole Slot & 1/4" x 20 Threaded Insert fits all aftermarket ceiling and wall brackets for ultimate flexibility.
Driver Complements
Mid/Woofer 1 - 3 1/4" Diameter (8.26cm)
Dynamic Balance composite cone driver
Tweeter 1 - 3/4" Diameter (1.91cm)
silk dome
Electrical
Overall Frequency Response 95Hz-24kHz
Lower -3dB Limit 125 Hz dB
Upper -3dB Limit 20kHz dB
Nominal Impedance 8 ohms
Recommended Amplifier Power 10-125 w/channel
Efficiency 89 dB
Inputs Gold-plated 5-way binding posts
Dimensions
Cabinet Size 7 1/8" H x 4 1/8" W x 5 3/16" D
(18.10cm H x 10.48cm W x 13.18cm D)
Mounting Options keyhole slot; .25 x 20 threaded insert
Enclosure Type Steel-plate reinforced curved enclosure with time-aligned driver geometry and PowerPort bass venting
Shipping/Other
Product Weight 3.00 lbs. (1.36kgs)
Shipping unit: each
Total Shipping Weight 3.70 lbs. (1.68kgs)
Speaker Warranty 5 years parts and labor (original purchaser)
ΔΙΑΤΙΘΕΤΑΙ ΚΑΙ ΣΕ ΑΣΠΡΟ ΧΡΩΜΑ
| Frequency Response +/- 3dB: 60 Hz - 35 KHz
Sensitivity (1W@1M): 87 dB
Driver Compliment: 1 x 140mm (5 1/2“) RST® mid-bass driver
1 x 25mm (1“) C-CAM® gold dome tweeter
Nominal Impedance: 8 ohms
Maximum SPL (each): 110.8 dBA
Recommended Amplifier Requirements (RMS): 25 - 100W
Bass Alignment: Front ported - bass reflex. HiVE®II port system
Power Handling (RMS): 100W
Crossover Frequency: 3.0kHz
External Dimensions:
(H x W x D) 250 x 140 x 140 mm
9 13/16 x 5 1/2 x 5 1/2 inch
Weight (Individual): 3.95 kg (8 3/4 lbs)
User's Manual
ΔΙΑΤΙΘΕΤΑΙ ΣΤΑ ΠΑΡΑΚΑΤΩ ΧΡΩΜΑΤΑ
|
Dimensions | Metric :4-3/4" W x 5" D x 8-3/8" H | 12.1 x 12.7 x 23.8 cm
Driver Complement :One 1" pure aluminum dome tweeter; One 4-1/2" BDSS bass/midrange drivers; One 4-1/2" pressure coupled bass radiator
Frequency Response :57 Hz – 30 kHz
Impedance :Compatible with 8 Ohms outputs
Sensitivity :89 dB
Recommended Associated Amplifier Power :10 – 150 watts
A/V Receiver Crossover Setting :100 Hz
Inputs :One pair of 5 way binding posts
Available Finishes :Gloss Black; Gloss White
Included Accessories :Tripod Base; Two ¼ 20 insert cover plugs
Mounting Options :Vertically: On Shelf with included tripod base; Equipped with rear ¼ 20 sized thread to accommodate on wall/on ceiling mounting with aftermarket mount(available separately); Equipped with bottom ¼ 20 sized thread to accommodate ProStand 600/800 stand mounting (ProStand 600/800 available separately); Equipped with keyhole mounting slot for flush mounting
Packaging :One to a carton
Weight | Metric :4 lbs | 1.8 kg
Warranty :5 Years
|
Two way, bass-reflex
Woofer 170 mm.
Polypropylene pentapolymer
Tweeter 28 mm. silk soft dome
Impedance: 6 Ohm (min. 4)
RMS POWER: 80 W
MAX POWER: 125 W
Efficiency: 88 dB/W/1 m
Dimensions: 255x350x400mm.
Net weight: 13,5 Kg.
Finish: high gloss metallized
Colors: blue, red, silver grey,
charcoal grey, racing red |
# Perfect for use with 55-inch class and larger ultra-shallow TVs
# Only 1.5 inches (38mm) deep
# Wall mount bracket and table stand included
# Simply the best ultra slim on-wall speaker on the planet
# The dynamic punch, wide frequency range and broad dispersion of full size speakers
# Aircraft grade extruded Aluminum enclosure
# Anodized Aluminum dome XTDD drivers
# Pure Aluminum dome tweeter
Dimensions (mounted on wall without bracket) :32" H x 6" W x 1-1/2" D (81.5cm x 15.2cm x 38mm)
Dimensions (mounted on wall with bracket) :32" H x 6" W x 1-9/16" D (81.5cm x 15.2cm x 40mm)
Dimensions (on table stand) :35" (89.1cm)
Table-stand base dimensions :8-11/16" W x 4-3/4" D (222mm x 136mm)
Driver complement :4 each 3-1/2" (90mm) XTDD anodized Aluminum dome mid/bass drivers pressure-coupled to 4 each 3-1/2" (90mm) dome low-bass radiators, 1 each 1" (25mm) Pure Aluminum Dome Tweeter
Frequency response (overall on wall) :70Hz - 30kHz
Sensitivity :92dB
Impedance :8 Ohms nominal
Recommended amplifier power :30 - 200 Watts per channel
Enclosure :Extruded Aluminum, sealed
Supplied accessories :Smoked glass base table stand, wall mount bracket, adjustable support foot for horizontal shelf placement, magnetic logos
Packaging :One to a carton
Available finishes :High gloss black
|
Reviews
There are no reviews yet.