Content | 2.5-way floorstanding speaker
General Description |
2.5-way floorstanding speaker |
Enclosure Type |
bass reflex |
Transducer Complement |
2.5-way |
Bass Driver |
5“(130mm)
Black woven Kevlar cone |
Midrange Driver |
5“(130mm)
Black woven Kevlar cone |
Full Range Driver |
1“(25mm) soft dome |
Sensitivity (2.83v @ 1m) |
88dB |
Peak Power Handling |
25-120W |
Peak SPL |
100dB |
Nominal Impedance |
4Ω (compatible 8Ω ) |
Minimum Impedance |
4.1Ω |
Frequency Response (+/-3dB) |
40Hz ~ 20kHz |
Bass Extension (-6dB) |
37Hz |
Crossover Frequency |
3.2kHz |
Dimensions ( H x W x D ) |
(940+25) x 200 x (310+28)mm |
Net Weight |
18.2kg/pcs |
|
Driver Complements Subwoofer 2 - 6" Diameter (15.24cm) Dynamic Balance Cassini Ovals with Super Cell Aerated Polypropylene diaphragms 2 - 5" Diameter (12.70cm) Dynamic Balance Cassini Ovals with Super Cell Aerated Polypropylene diaphrams Mid/Woofer 1 - 6 1/2" Diameter (16.51cm) Dynamic Balance driver with Super Cell Aerated Polypropylene cone 1 - 5 1/4" Diameter (13.34cm) Dynamic Balance driver with Super Cell Aerated Polypropylene cone Midrange 1 - 3 1/4" Diameter (8.26cm) Dynamic Balance driver with Super Cell Aerated Polypropylene cone 1 - 3 1/4" Diameter (8.26cm) Dynamic Balance driver with Super Cell Aerated Polypropylene cone Tweeter 1 - 1" Diameter (2.54cm) Dynamic Balance Enhanced Ring Radiator Tweeter 1 - 1" Diameter (2.54cm) Dynamic Balance Ehanced Ring Radiator tweeter Electrical Overall Frequency Response 20Hz-40kHz 22Hz-40kHz Lower -3dB Limit 38Hz dB 42Hz dB Upper -3dB Limit 30kHz dB 30kHz dB Nominal Impedance compatible with 8 ohm outputs ohms compatible with 8 ohm outputs ohms Recommended Amplifier Power 20-300 w/channel 20-250 w/channel Efficiency 88 dB 88 dB Crossover Orth Crossover Orth Crossover Crossover (mid-high array) 3000Hz 2800Hz Crossover (subwoofer) 100HZ 100Hz Inputs Dual Gold-Plated Binding Posts Dual Gold-Plated Binding Posts Dimensions Cabinet Size 50 13/16" H x 9 1/2" W x 18 7/16" D (129.06cm H x 24.13cm W x 46.83cm D) 47" H x 8 5/16" W x 14 3/8" D (119.38cm H x 21.11cm W x 36.51cm D) Footprint Size 10 1/2" W x 20 5/16" D (26.67cm W x 51.59cm D) 9 1/4" W x 16 1/4" D (23.50cm W x 41.27cm D) Mounting Options floor floor Enclosure Type Sealed Sealed Enclosure Type (subwoofer) Dual PowerPort Dual PowerPort bass venting Shipping/Other Product Weight 99.20 lbs. (45.00kgs) 78.00 lbs. (35.38kgs) Shipping unit: each each Total Shipping Weight 114.70 lbs. (52.03kgs) 86.40 lbs. (39.19kgs) Speaker Warranty 5 years parts and labor (original purchaser) 5 years parts and labor (original purchaser) ALSO AVAILABLE IN "EBONY" COLOR
|
Two way, double reflex
2 x Woofer 130 mm.
Covered paper, double magnet
Tweeter 24 x 50 mm.
Isodynamic mylar diaphragm
Impedance: 8 Ohm (min. 6,5)
RMS Power: 100 W
MAX Power: 150W
Efficiency: 90 dB/W/1m
Dimensions: 170x1080x260mm.
Weight: 17 Kg.
Finish: rosewood, black oak
|
Single Ported HiVe® II technology Sealed Mid-range TLE® 2 x 6.5” long-throw RDT® bass drivers 1 x 4” RDT® mid-range driver 1 x C-CAM® high frequency ribbon transducer All cabinet finishes have hand-upholstered front baffles in Ingleston Black premium grade leather. Finish options: Santos Rosewood veneer with clear gloss piano lacquer Ebony veneer with clear gloss piano lacquer Piano black gloss Optional dedicated floor stands are available Frequency Response: 35 Hz - 100 KHz Sensitivity (1W@1M): 90 dB Nominal Impedance: 4 Ohms Maximum S.P.L (Per pair in room): 117.8 dBA Power Handling (RMS): 250 W Recommended Amplifier Requirements (RMS): 100 - 250 W Bass Alignment: Rear Ported HiVe®II technology Sealed Mid-range TLE® Mid / H.F Crossover Frequency: 3600 Hz Bass Low Pass Crossover Frequency: 600 Hz Drive Unit Complement: 2 x 6.5" long-throw RDT® bass drivers 1 x 4" RDT® mid-range driver 1 x C-CAM® high frequency ribbon transducer External Dimensions - Including Fixed Plinth (H x W x D): 998 x 360 x 375 mm (39 5/16 x 14 3/16 x 14 3/4 inches) Weight (each) Including Plinth: 33Kg (72.7 lbs) User's Manual AVAILABLE IN THESE COLOR FINISHES
|
Recommended Usage Front Speakers
Type 3-Way Bass Reflex Design
Woofers Dual 8" PMD Cone
MidRange Driver 5" Cone With Waveguide Horn
Tweeters 1" Aluminum Dome With Waveguide Horn
Magnetic Shielding Yes
Twin Bass Reflex Ports Single Port
Gold-Plated Brass Extruded Terminals Bi-Wiring Terminals
Frequency Response 30 Hz - 35 kHz
Sensitivity 89 dB/2.83 V/1 m
Input Power (Maximum / Nominal) 250W / 100W
Impedance 6 Ohms
Product Dimensions (W x H x D) 10-7/8" x 43-5/16" x 15-3/8“
Product Weight (lbs. each) 53.7
|
The CM8 is an elegantly proportioned, slimmed down version of the award-winning CM9. A true three-way loudspeaker that will appeal to discerning customers who demand the very best sound quality, but have limited space in which to achieve it.
Like all the models in the CM Series, the CM8 uses crossovers of remarkable simplicity and quality, so what you hear is that much closer to the sound of the original recording. In its functional perfection and understated elegance, itʼs nothing less than a masterpiece. Pure and simple.
All CM Series speakers come with chrome driver trims. Grilles attach magnetically, so there are no unsightly grille-mounting features to spoil the clean lines of the speakerʼs façade. For the finish, you can choose either one of two real-wood veneers in Rosenut or Wengé, the highly polished gloss black or the new stylish white.
30-200watt 8 Ohm
Dimensions: 990x200x300
ALSO AVAILABLE IN ROSENUT AND WENGE COLOR
|
Reviews
There are no reviews yet.